Abstract:Concept of electrical monitoring of structural health using integrated CNTYs. Continuously long carbon nanotube yarns (CNTYs) were integrated into glass fiber weave/vinyl ester composites to act as electrical sensing elements to self‐monitoring damage. A grid comprising one longitudinal and three transverse CNTYs, running through the 125 mm long flexural specimen, was integrated into the top and bottom layers of glass fiber weaves to allow monitoring of the electrical resistance and locate damage. Four‐point bending specimens were tested under cyclic flexural loading, alternating with low‐velocity impacts to monitor damage initiation and progression. The electrical response of the CNTY grid is able to pinpoint the region where damage initiates, accumulates, and propagates under cycling loading, triggered or not by impact. The damage location identified by the electrical response of CNTYs is supported by in situ in‐plane and through‐thickness strain fields measured by digital image correlation (DIC). The correlation between the electrical technique and the DIC‐measured strain fields indicate that the majority of damage occurs through interlaminar stresses at or near the supports and/or loading introduction elements of the flexural test rig. Integrating CNTYs into structural composites enables online damage monitoring, leading to intelligent condition‐based maintenance for naval ships, aircrafts, and other structures, ultimately extending service life and reducing costs. Highlights CNTYs were integrated into composites for damage self‐sensing. Electrical response of CNTYs pinpoints the region of damage. Damage caused by cyclic bending and low velocity impacts were identified. Electrically identified damage is supported by DIC.

Tensile damage self-monitoring of carbon fiber/epoxy 3D braided composites with electrical resistance method

Review of Self-Sensing of Damage and Interfacial Evaluation Using Electrical Resistance Measurements in Nano/micro Carbon Materials-Reinforced Composites

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

A New Electrical Resistance Measurement Method of Carbon Fiber-Reinforced Polymer Tubes Based on C⁴D Technique

Mechanical-electrical coupling behaviors of 3-D carbon fiber angle-interlock woven composites under quasi-static and cyclic tension

Structural health monitoring of carbon fiber reinforced matrix by the resistance variation method

Structural health monitoring of carbon nanotube-modified glass fiber-reinforced polymer composites by electrical resistance measurements and digital image correlation

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Tensile strain and damage self-sensing of flax FRP laminates using carbon nanofiber conductive network coupled with acoustic emission

Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites

Non-destructive health monitoring of glass fibre epoxy composites under fatigue loading using electrical resistance change method

Structural Health Monitoring of Glass Fiber-Reinforced Polymer Laminates with Carbon Nanotube-Coated Glass Fiber Sensing Layer after Low-Velocity Impact Using Electrical Resistance Tomography

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

On-line tensile damage monitoring of WGF/epoxy T-joint by the embedded MWCNT@WGF sensor

Integration of carbon nanotube yarns into glass‐fiber reinforced composites for electrical self‐sensing of damage under cyclic bending and impact loading

Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures

In Situ Damage Sensing in the Glass Fabric Reinforced Epoxy Composites Containing CNT–Al2O3 Hybrids

Mode I Interlaminar Crack Length Prediction by the Resistance Signal of the Integrated MWCNT Sensor in WGF/epoxy Composites During DCB Test

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Experimental Investigation of Self-Sensing Carbon Fiber Reinforced Cementitious Composite for Strain Measurement of an RC Portal Frame

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings