Abstract:Lanthanum hexaboride (LaB6) nanostructures have attracted much attention in recent years because they exhibit high electrical conductivity and thermal conductivity, low work function and high chemical stability, and can be expected to be an ideal cold cathode electron source for power device applications. Although some groups have developed means to grow LaB6 nanostructures and investigated their emission properties, the moderate synthesis of the LaB6 nanostructure cathode with high-performance is still a challenging issue. Here we developed a simple one-step chemical vapour deposition (CVD) method to prepare the LaB6 nanowire cold cathode film. The LaB6 nanowires have a mean length of tens of micrometres and their average diameter is about 100 nm. The formation of the nanowires is attributed to the synergy of the vapour-liquid-solid (VLS) and vapour-solid (VS) mechanisms. The LaB6 nanowires are found to have a low turn-on (2.2 V mu m(-1)) and threshold field (2.9 V mu m(-1)) as well as nice field emission (FE) stability with a current fluctuation of only 1.7%. And their emission current can reach 5.6 mA (16.7 mA cm(-2)) at 4.1 V mu m(-1), which is large enough for the high-current requirements of cathodes used in power devices. Moreover, the LaB6 nanowires still retain excellent performance even if the operation temperature is raised up to 773 K. It is noted that the LaB6 nanowire film exhibits quite different emission behaviours during a temperature cycling between room temperature and 773 K. The adsorption and desorption of oxygen onto and from the nanowire's surface is suggested to explain the discrepancy of such emission properties based on a series of our designed experiments. Most importantly, the LaB6 nanowire cathode film can almost recover to the original excellent FE performances after detachment of the surface oxygen molecules, which suggests that they should be ideal cathode nanomaterials for power device applications.

An ultrabright and monochromatic electron point source made of a LaB 6 nanowire

Ultrabright and monochromatic nanowire electron sources

High-endurance Micro-Engineered LaB6 Nanowire Electron Source for High-Resolution Electron Microscopy

LaB6 Nanowires and Their Field Emission Properties

Fabrication of Lanthanum Hexaboride Single Nanowire Field Emitter and Their Field Emission Properties

New Applications for Ultra-High Brightness LaB6 Nanowire Cathode

Lab6 Tip-Modified Multiwalled Carbon Nanotube As High Quality Field Emission Electron Source

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

WO3 nanowire field emission point electron source with high brightness and current stability

Nanostructured LaB6 field emitter with lowest apical work function.

Carbon Nanotubes As Field Emission Sources

A Stable High-Brightness Electron Gun with Zr/W-tip for Nanometer Lithography. I. Emission Properties in Schottky- and Thermal Field-Emission Regions

Point field emission electron source with a magnetically focused electron beam

Superconducting Niobium Tip Electron Beam Source

Novel Nanostructured Carbon Nanotube Electron Sources

Enhanced Electron Field Emission from Single-Crystalline Lab6 Nanowires with Ambient Temperature

A moderate synthesis route of 5.6 mA-current LaB6 nanowire film with recoverable emission performance towards cold cathode electron source applications

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Fabrication and Characterization of Single Carbon Nanotube Emitters As Point Electron Sources

Field Emission From Crystalline Copper Sulphide Nanowire Arrays

Ultra Coherent Single Electron Emission of Carbon Nanotubes