Abstract:The size tunability and chemical versatility of nanostructures enable electron sources of high brightness and temporal coherence, both of which are important characteristics for high-resolution electron microscopy(1-3). Despite intensive research efforts in the field, so far, only conventional field emitters based on a bulk tungsten (W) needle have been able to yield atomic-resolution images. The absence of viable alternatives is in part caused by insufficient fabrication precision for nanostructured sources, which require an alignment precision of subdegree angular deviation of a nanometre-sized emission area with the macroscopic emitter axis(4). To overcome this challenge, in this work we micro-engineered a LaB6 nanowire-based electron source that emitted a highly collimated electron beam with good lateral and angular alignment. We integrated a passive collimator structure into the support needle tip for the LaB6 nanowire emitter. The collimator formed an axially symmetric electric field around the emission tip of the nanowire. Furthermore, by means of micromanipulation, the support needle tip was bent to align the emitted electron beam with the emitter axis. After installation in an aberration-corrected transmission electron microscope, we characterized the performance of the electron source in a vacuum of 10(-8) Pa and achieved atomic resolution in both broad-beam and probe-forming modes at 60 kV beam energy. The natural, unmonochromated 0.20 eV electron energy loss spectroscopy resolution, 20% probe-forming efficiency and 0.4% probe current peak-to-peak noise ratio paired with modest vacuum requirements make the LaB6 nanowire-based electron source an attractive alternative to the standard W-based sources for low-cost electron beam instruments.

A Stable High-Brightness Electron Gun with Zr/W-tip for Nanometer Lithography. I. Emission Properties in Schottky- and Thermal Field-Emission Regions

Precisely-controlled Fabrication of Single ZnO Nanoemitter Arrays and Their Possible Application in Low Energy Parallel Electron Beam Exposure.

An ultrabright and monochromatic electron point source made of a LaB 6 nanowire

WO3 nanowire field emission point electron source with high brightness and current stability

High-endurance Micro-Engineered LaB6 Nanowire Electron Source for High-Resolution Electron Microscopy

Fabrication And Field Emission Study Of Atomically Sharp High-Density Tungsten Nanotip Arrays

Superconducting Niobium Tip Electron Beam Source

Stable, Self-Ballasting Field Emission from Zinc Oxide Nanowires Grown on an Array of Vertically Aligned Carbon Nanofibers

Stable Field Emission from Single-Crystalline Zirconium Carbide Nanowires

High brightness CW electron beams from Superconducting RF photoemission gun

10.5: Field emission properties of atomically sharp tungsten nanotip arrays fabricated by a novel nanocasting method

Laser microstructuring of Si surfaces for low-threshold field-electron emission

Carbon films for use as the electron source in a parallel e-beam lithography system

Laser-induced Field Emission from Tungsten Tip: Optical Control of Emission Sites and Emission Process

Sub-cycle Nanotip Field Emission of Electrons Driven by Air Plasma Generated THz Pulses

Lab6 Tip-Modified Multiwalled Carbon Nanotube As High Quality Field Emission Electron Source

Ultrabright and monochromatic nanowire electron sources

Field Emission Properties of Zinc Oxide Nanowires Fabricated by Thermal Evaporation

P-Type Si-Tips With Integrated Nanochannels for Stable Nonsaturated High Current Density Field Electron Emission

Point field emission electron source with a magnetically focused electron beam

Field Emission Microscopy Study of Zinc Oxide Nanowires on Tungsten Tip