Abstract:H doping can enhance the performance of ZnO thin-film transistors (TFTs) to a certain extent, and the design of double active layers is an effective way to further improve a device’s performance. However, there are few studies on the combination of these two strategies. We fabricated TFTs with ZnO:H (4 nm)/ZnO (20 nm) double active layers by magnetron sputtering at room temperature, and studied the effect of the hydrogen flow ratio on the devices’ performance. ZnO:H/ZnO-TFT has the best overall performance when H2/(Ar + H2) = 0.13% with a mobility of 12.10 cm2/Vs, an on/off current ratio of 2.32 × 107, a subthreshold swing of 0.67 V/Dec, and a threshold voltage of 1.68 V, which is significantly better than the performance of single active layer ZnO:H-TFTs. This exhibits that the transport mechanism of carriers in double active layer devices is more complicated. On one hand, increasing the hydrogen flow ratio can more effectively suppress the oxygen-related defect states, thus reducing the carrier scattering and increasing the carrier concentration. On the other hand, the energy band analysis shows that electrons accumulate at the interface of the ZnO layer close to the ZnO:H layer, providing an additional path for carrier transport. Our research exhibits that the combination of a simple hydrogen doping process and double active layer construction can achieve the fabrication of high-performance ZnO-based TFTs, and that the whole room temperature process also provides important reference value for the subsequent development of flexible devices.

Performance Enhancement of ZITO Thin Film Transistors via Graphene Bridge Layer by Sol-Gel Combustion Process.

Low-voltage, Solution-Processed InZnO Thin-Film Transistors with Enhanced Performance Achieved by Bilayer Gate Dielectrics

Performance Improvement of Amorphous Thin-Film Transistors with Solution-Processed InZnO/InMgZnO Bilayer Channels

Performance improvement of tin-doped zinc oxide thin-film transistor by novel channel modulation layer of indium tin oxide/tin zinc oxide

Achieving High Performance of ZnSnO Thin-Film Transistor via Homojunction Strategy

Performance Enhancement of Indium Zinc Oxide Thin-Film Transistors Through Process Optimizations

High performance enhancement-mode thin-film transistor with graphene quantum dot-decorated In2O3 channel layers

Solution-Processed Indium-Zinc-Oxide Thin-Film Transistors Based On Anodized Aluminum Oxide Gate Insulator Modified With Zirconium Oxide

Solution-Processed Zinc Oxilde Thin Films and Top-Gate Thin Film Transistors

Enhanced Performance of ZnO Thin-Film Transistors with ZnO Dual-Active-layer

High-Performance Thin-Film Transistors with ZnO:H/ZnO Double Active Layers Fabricated at Room Temperature

Nano-Scale Ga2O3 Interface Engineering for High-Performance of ZnO-Based Thin-Film Transistors

Performance Enhancement of TiZO Thin Film Transistors by Introducing a Thin ITO Interlayer

High-Performance Transistors Based on Zinc Tin Oxides by Single Spin-Coating Process

Fabrication and Properties of InGaZnO Thin-Film Transistors Based on a Sol–Gel Method with Different Electrode Patterns

Solution-processed zinc oxide thin films and top-gate thin film transistors

The improved properties of solution-based InGaSnO (IGTO) thin film transistor using the modification of InZnO (IZO) layer

High mobility amorphous InGaZnO thin film transistor with single wall carbon nanotubes enhanced-current path

Gel-based precursors for the high-performance of n-channel GaInSnZnO and p-channel CuGaSnSO thin-film transistors

High Performance of Y-doped Sn-Zn-O Films Fabricated by Solution-process for Amorphous Thin Film Transistors

High-performance Carbon Nanotube/ingazno Composite Thin Film Transistors and Concentration Effect