Abstract:Mode-locked mid-infrared (mid-IR) fiber lasers are of increasing interest due to their many potential applications in spectroscopic sensors, infrared countermeasures, laser surgery, and high-efficiency pump sources for nonlinear wavelength convertors. Er3+-doped ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber lasers, which can emit mid-IR light at 2.65-2.9 mu m through the transition from the upper energy level I-4(11/2) to the lower laser level I-4(13/2), have attracted much attention because of their broad emission range, high optical efficiency, and the ready availability of diode pump lasers at the two absorption peaks of Er3+ ions (975 nm and 976 nm). In recent years, significant progress on high power Er3+-doped ZBLAN fiber lasers has been achieved and over 20 watt cw output at 2.8 mu m has been demonstrated; however, there has been little progress on ultrafast mid-IR ZBLAN fiber lasers to date. We report a passively mode-locked Er3+-doped ZBLAN fiber laser in which a Fe2+:ZnSe crystal was used as the intracavity saturable absorber. Fe2+:ZnSe is an ideal material for mid-IR laser pulse generation because of its large saturable absorption cross-section and small saturation energy along with the excellent opto-mechanical (damage threshold similar to 2 J/cm(2)) and physical characteristics of the crystalline ZnSe host. A 1.6 m double-clad 8 mol% Er3+-doped ZBLAN fiber was used in our experiment. The fiber core has a diameter of 15 mu m and a numerical aperture (NA) of 0.1. The inner circular cladding has a diameter of 125 mu m and an NA of 0.5. Both continuous-wave and Q-switched mode-locking pulses at 2.8 mu m were obtained. Continuous-wave mode locking operation with a pulse duration of 19 ps and an average power of 51 mW were achieved when a collimated beam traversed the Fe2+:ZnSe crystal. When the cavity was modified to provide a focused beam at the Fe2+:ZnSe crystal, Q-switched mode-locked operation with a pulse duration of 60 ps and an average power of 4.6 mW was achieved. More powerful and narrower pulses are expected if the dispersion of the cavity can be properly managed.

Passively continuous-wave mode-locked Er(3+)-doped ZBLAN fiber laser at 2.8 μm.

Er3+-doped ZBLAN Fiber Laser Q-switched by Fe:ZnSe

Picosecond Passively Mode-Locked Mid-Infrared Fiber Laser

Watt-level passively mode-locked Er3+-doped ZBLAN fiber laser at 2.8 mu m

Wavelength-tunable Passively Mode-Locked Mid-Infrared Er3+-doped ZBLAN Fiber Laser.

Watt-level Passively Mode-Locked Er^3+-doped ZBLAN Fiber Laser at 28 Μm

Passively Q-switched 2.8-μm nanosecond fiber laser

Passively Q-Switched 2.8-$\Mu{\rm M}$ Nanosecond Fiber Laser

118 Nm-Wavelength-tunable Er3+-doped ZBLAN Passively Mode-Locked Fiber Laser

Widely tunable single-frequency Er-doped ZBLAN fiber laser with emission from 3.37 to 3.72 µm

Tunable Fe^2+:ZnSe Passively Q-switched Ho^3+-doped ZBLAN Fiber Laser Around 3 Μm

Widely Tunable Passively Q-switched Er 3+ -Doped ZrF 4 Fiber Laser in the Range of 3.4–3.7 Μm Based on a Fe 2+ :Znse Crystal

Experimental Investigation of High Power Pulsed 2.8 Μm Er3+-doped ZBLAN Fiber Lasers

Q-Switched Mid-Infrared Er<sup>3+</sup>: ZBLAN Fiber Laser at 2.8 μm with a MXene-Based Saturable Absorber

Gain-Switched Er-Doped Fluoride Fiber Laser at ~3.75 μm

Highly efficient actively Q-switched Er^3+-doped ZBLAN fiber laser operating around 2.8 μm using a La_3Ga_5SiO_14 electro-optical modulator

High power passively Q-switched Er3+-doped ZBLAN fiber laser at 2.8 µm based on a semiconductor saturable absorber mirror

Generation of 131 Fs Mode-Locked Pulses from 2.8 Μm Er:ZBLAN Fiber Laser

Dual-wavelength and Wavelength-Tunable Passively Q-switched 3um Fiber Laser Based on a Bulk PtSe2

Femtosecond Passively Mode-Locked Er3+-doped Fiber Ring Laser

Widely wavelength tunable gain-switched Er<sup>3+</sup>-doped ZBLAN fiber laser around 2.8 μm.