Abstract:Large-mode-area photonic crystal fiber is used to generate high power, high beam quality supercontinuum. Propagation and supercontinuum generation process of laser pulse in large-mode-area (LMA) photonic crystal fiber (PCF) is simulated by solving the general nonlinear Schrödinger equation (GNLSE) using the split-step Fourier method. Effects of the pump pulse parameters (peak power and chirp) and the length of photonic crystal fiber used on supercontinuum generation are particularly estimated. Nonlinear spectral broadening mechanism of laser pulse in large-mode-area photonic crystal fiber is discussed. The results show that the process of supercontinuum generation can be divided into three stages: initial broadening, dramatic broadening and saturation broadening. The spectrum width and efficiency can be achieved by the optimized length of LMA PCF to insure output of the generated supercontinuum at the dramatic broadening stage. The pump peak power and chirp have important impact on supercontinuum generation. When a small peak power pump is input, the spectrum broadens symmetrically. When the pump peak power increases, it brings little changes with the shorter wavelength component but broader of the longer wavelength component. The time-domain shape of the pulse exhibits concussion modulation as the effect of pulse breakup. When the pump chirp is positive, little influence is shown, except a shift of longer wavelength power by increasing the chirp. But the full width of the supercontinuum has little changes. While the pump chirp is negative and satisfy certain condition, the nonlinear is enhanced to facilitate the supercontinuum generation.

Broadband Supercontinuum Generation in PCF, HNLF and ZBLAN Fiber with a Carbon-Nanotube-based Passively Mode-locked Erbium-doped Fiber Laser

Supercontinuum generation based on nanofiber

Broadband Supercontinuum Generation from 600 to 5400 Nm in a Tapered Fluorotellurite Fiber Pumped by a 2010 Nm Femtosecond Fiber Laser

All-Fiber Wideband Supercontinuum Generation in Short Hybrid Highly Nonlinear Fibers With a Femtosecond Erbium-Doped Fiber Laser

High-power Broadband Supercontinuum Generation Through a Simple Narrow-Bandwidth FBGs-based Fiber Laser Cavity

All fiber supercontinuum light source using photonic crystal fibers pumped by nanosecond fiber laser pulses

Cascaded PCF Tapers for Flat Broadband Supercontinuum Generation

Broadband Mid-Infrared Supercontinuum Generation Using A Novel Selectively Air-Hole Filled As2s5-As2s3 Hybrid Pcf

Supercontinuum Generation with a Repetition Rate over 100mhz Based on a Picosecond Pulse from a Normal Dispersion Fiber Laser

Ultra-Broadband Supercontinuum Generation and Characterization of Brillouin/Raman Fiber Laser.

Over Octave-Spanning Supercontinuum Generation in Tapered Seven-Core Photonic Crystal Fiber

Photonic crystal fibers for supercontinuum generation

Supercontinuum Generation Covering the Entire 0.4–5 Μm Transmission Window in a Tapered Ultra-High Numerical Aperture All-Solid Fluorotellurite Fiber

30-W Supercontinuum Generation Based on ZBLAN Fiber in an All-Fiber Configuration

Supercontinuum Generation in Polarization Maintaining Photonic Crystal Fibers Using Nanosecond Pulses

Supercontinuum generation and control from large-mode-area photonic crystal fiber

Broadly Tunable Ytterbium-Doped Photonic Crystal Fibre Laser and High Power Superfluorescent Fibre Source

Over 4000 Nm Bandwidth of Mid-Ir Supercontinuum Generation in Sub-Centimeter Segments of Highly Nonlinear Tellurite Pcfs

20 W all fiber supercontinuum generation from picosecond MOPA pumped photonic crystal fiber

Broadband mid-infrared supercontinuum generation in AlGaAs photonic crystal fibers by liquid infiltration and rod-filling approaches

All-fiber smooth supercontinuum generation in highly nonlinear dispersion-shifted fiber