Abstract:A highly stable figure-9 Yb-doped fiber laser with all polarization-maintaining (PM) double-cladding fiber is demonstrated. Through leveraging the saturable absorption effect of a nonlinear amplifying loop mirror, both the Q-switched and mode-locked operation are realized by adjusting the pump power. With increasing the pump power from the threshold to the maxima, the repetition rate of the Q-switched pulses is linearly increased from 14.9 kHz to 138.0 kHz with the pulse duration accordingly reduced from 3.9 µs to 970 ns. The corresponding maximum average power and pulse energy are respectively 2.34 W and 17 µJ, which are more than ten times larger than the common material-based Q-switched all-fiber lasers. In addition, in the process of increasing and decreasing the pump power, an optical bistability that manifested as a significant power jumping effect is observed, while its effect on the pulse repetition rate and duration is trivial. Whereas for the single pulse mode-locked operation, a maximum output power of 56.3 mW with a fundamental repetition rate of 12.5 MHz is realized, corresponding to a pulse energy of 4.5 nJ. To the best of our knowledge, it is much higher than the most of previous works concerning figure-9 all-PM-fiber lasers of which the emitted pulse energy is generally less than 1 nJ. After being compressed by a pair of diffraction grating, a minimum pulse width of 378 fs and a maximum peak power of 9.76 kW are respectively obtained. In addition, through characterizing the spectral and temporal properties of the laser source, the excellent stability of both the Q-switched and mode-locked operations is verified.

Q-switched Mode-Locking Femtosecond All-Fiber Laser Based on Er3+/Yb3+ Codoped Phosphate Fiber

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Passively Q-Switched and Mode-Locked Er3+-Doped Ring Fiber Laser with Pulse Width of Hundreds of Picoseconds

Q-switched mode-locked fiber laser based on the pump modulation technique

Low-repetition-rate, high-energy, twin-pulse, passively mode locked Yb3+-doped fiber laser

All-fiber low threshold tunable multimode Q-switched mode locked fiber laser using a few mode Er-doped fiber

Generation of different mode-locked states in a Yb-doped fiber laser based on nonlinear multimode interference

Femto/nano-second switchable passively mode-locked fiber laser with analytic modeling by cubic-quintic Ginzburg-Landau equation

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Mode-locked fiber laser based on a small-period long-period fiber grating inscribed by femtosecond laser

Multi-wavelength Mode-Locked Er/Yb Co-doped Fiber Laser with Square Nano-Second Pulse Output

Q-switched mode-locking in an erbium-doped femtosecond fiber laser based on nonlinear polarization rotation

Er-doped mode-locked fiber lasers based on nonlinear polarization rotation and nonlinear multimode interference

Highly stable Q-switched and mode-locked pulse generation from an all-PM figure-9 fiber laser.

Q-switched fiber laser by all-fiber piezoelectric modulation and pulsed pump

High-energy femtosecond pulse generation from a hybrid mode-locked large-mode-area Er:ZBLAN fiber laser

Yb-doped all fiber picosecond laser based on grade-index multimode fiber with microcavity

Self-Q-switched and multi-wavelength mode-locked fiber laser based on figure-of-eight cavity

816 nm All-Fiber Mode-Locked Tm-Doped Laser in Noise-Like Pulse Regime