Abstract:Mode-locked mid-infrared (mid-IR) fiber lasers are of increasing interest due to their many potential applications in spectroscopic sensors, infrared countermeasures, laser surgery, and high-efficiency pump sources for nonlinear wavelength convertors. Er3+-doped ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber lasers, which can emit mid-IR light at 2.65-2.9 mu m through the transition from the upper energy level I-4(11/2) to the lower laser level I-4(13/2), have attracted much attention because of their broad emission range, high optical efficiency, and the ready availability of diode pump lasers at the two absorption peaks of Er3+ ions (975 nm and 976 nm). In recent years, significant progress on high power Er3+-doped ZBLAN fiber lasers has been achieved and over 20 watt cw output at 2.8 mu m has been demonstrated; however, there has been little progress on ultrafast mid-IR ZBLAN fiber lasers to date. We report a passively mode-locked Er3+-doped ZBLAN fiber laser in which a Fe2+:ZnSe crystal was used as the intracavity saturable absorber. Fe2+:ZnSe is an ideal material for mid-IR laser pulse generation because of its large saturable absorption cross-section and small saturation energy along with the excellent opto-mechanical (damage threshold similar to 2 J/cm(2)) and physical characteristics of the crystalline ZnSe host. A 1.6 m double-clad 8 mol% Er3+-doped ZBLAN fiber was used in our experiment. The fiber core has a diameter of 15 mu m and a numerical aperture (NA) of 0.1. The inner circular cladding has a diameter of 125 mu m and an NA of 0.5. Both continuous-wave and Q-switched mode-locking pulses at 2.8 mu m were obtained. Continuous-wave mode locking operation with a pulse duration of 19 ps and an average power of 51 mW were achieved when a collimated beam traversed the Fe2+:ZnSe crystal. When the cavity was modified to provide a focused beam at the Fe2+:ZnSe crystal, Q-switched mode-locked operation with a pulse duration of 60 ps and an average power of 4.6 mW was achieved. More powerful and narrower pulses are expected if the dispersion of the cavity can be properly managed.

High-peak-power and wavelength tunable acousto-optic Q-switched Er:ZBLAN fiber laser

Widely wavelength tunable gain-switched Er<sup>3+</sup>-doped ZBLAN fiber laser around 2.8 μm.

Experimental Investigation of High Power Pulsed 2.8 Μm Er3+-doped ZBLAN Fiber Lasers

Widely Wavelength Tunable Gain-Switched Er^3+-doped ZBLAN Fiber Laser Around 28 Μm

High Peak Power Actively Q-switched Mid-Infrared Fiber Lasers at 3 Μm

Mid-infrared ultrashort pulses generated from a hybrid mode-locked Er:ZBLAN fiber laser

Wavelength-tunable spatiotemporal mode-locking in a large-mode-area Er:ZBLAN fiber laser at 2.8 µm

118 Nm-Wavelength-tunable Er3+-doped ZBLAN Passively Mode-Locked Fiber Laser

Picosecond Passively Mode-Locked Mid-Infrared Fiber Laser

Over 5-W Passively Q-Switched Mid-Infrared Fiber Laser With a Wide Continuous Wavelength Tuning Range

Watt-level passively mode-locked Er3+-doped ZBLAN fiber laser at 2.8 mu m

Mid-infrared pulsed Er:ZBLAN fiber laser producing mode-switchable cylindrical vector beams

Widely tunable single-frequency Er-doped ZBLAN fiber laser with emission from 3.37 to 3.72 µm

Watt-level Gain-Switched Fiber Laser at 3.46 Μm.

Watt-level Passively Mode-Locked Er^3+-doped ZBLAN Fiber Laser at 28 Μm

Q-Switched Mid-Infrared Er3+: Zblan Fiber Laser At 2.8 Mu M With A Mxene-Based Saturable Absorber

Q-Switched Mid-Infrared Er<sup>3+</sup>: ZBLAN Fiber Laser at 2.8 μm with a MXene-Based Saturable Absorber

High-power xenon lamp-pumped Er:YAP pulse laser operated in free-running and acousto-optical <i>Q</i>-switching modes

Wavelength-tunable Passively Mode-Locked Mid-Infrared Er3+-doped ZBLAN Fiber Laser.

Gain-Switched Er-Doped Fluoride Fiber Laser at ~3.75 μm

Acousto-Optic Q-Switched Pulse Fiber Laser with the Peak Power of 9kW