Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

High-energy, tunable-wavelengths, Q-switched pulse laser

Narrow bandwidth Q-switched Erbium-doped fiber laser based on dynamic saturable absorption filtering effect

Graphene Q-Switched, Tunable Fiber Laser

Investigation on the characteristics of Q‐switched pulses in an EDFL based on the saturable absorption effect of germanene

Femtosecond Er-Doped All-Fiber Laser with High-Density Well-Aligned Carbon-Nanotube-Based Thin-Film Saturable Absorber

Wavelength Tunable Q-Switched Fiber Laser Using Variable Attenuator Based on Tapered Fiber

High-peak-power and wavelength tunable acousto-optic Q-switched Er:ZBLAN fiber laser

Stable Q-switched and femtosecond mode-locked erbium-doped fiber laser based on a CuSe nanosheets saturable absorber

Passively Q-switched EDFL using Fe3O4-nanoparticle saturable absorber

Self-Q-switching behavior of erbium-doped tellurite microstructured fiber lasers

Tunable multidimensional multiplexed Q-switched pulse outputs from a linear fiber laser with a bidirectional loop

Q-switched fiber laser based on CdS quantum dots as a saturable absorber

Highly Stable Passively Q-Switched Erbium-Doped All-Fiber Laser Based on Niobium Diselenide Saturable Absorber

Q-switched pulse operation in erbium-doped fiber laser subject to CdS nanoparticles-based saturable absorber deposit directly on the fiber ferrule

Wavelength-switchable ultra-narrow linewidth fiber laser enabled by a figure-8 compound-ring-cavity filter and a polarization-managed four-channel filter

Wavelength tunable Q-switched Er-doped fiber laser based on ZrSe2

Tunable and Switchable Low-Threshold Multi-Wavelength Erbium-Doped Fiber Pulsed Laser Based on Lyot Filter and NOLM

Tunable high energy pulse generation in the range of 2.9-3.6 μm enabled by an actively Q switched Er3+/Dy3+ codoped fluoride fiber oscillator

Self Q-switched single-frequency all-fiber laser

Tunable and switchable multi-wavelength actively Q-switched erbium-doped fiber laser based on cascaded fiber filters and EOM

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription