High Selectivity Of Oxidative Dehydrogenation Of Ethane To Ethylene In An Oxygen Permeable Membrane Reactor

Hh Wang,Y Cong,Ws Yang

DOI: https://doi.org/10.1039/b203168j

IF: 4.9

2002-01-01

Chemical Communications

Abstract:An oxygen permeable membrane based on Ba0.5Sr0.5Co0.8-Fe0.2O3-delta is used to supply lattice oxide continuously for oxidative dehydrogenation of ethane to ethylene with selectivity as high as 90% at 650degreesC.

What problem does this paper attempt to address?

Continuous Oxygen Ion Transfer Medium As a Catalyst for High Selective Oxidative Dehydrogenation of Ethane

Haihui Wang,You Cong,Weishen Yang

DOI: https://doi.org/10.1023/a:1021088904379

IF: 2.936

2002-01-01

Catalysis Letters

Abstract:An oxygen permeable mixed ion and electron conducting membrane (OPMIECM) was used as an oxygen transfer medium as well as a catalyst for the oxidative dehydrogenation of ethane to produce ethylene. O 2- species transported through the membrane reacted with ethane to produce ethylene before it recombined to gaseous O 2 , so that the deep oxidation of the products was greatly suppressed. As a result, 80% selectivity of ethylene at 84% ethane conversion was achieved, whereas 53.7% ethylene selectivity was obtained using a conventional fixed-bed reactor under the same reaction conditions with the same catalyst at 800 °C. A 100 h continuous operation of this process was carried out and the result indicates the feasibility for practical applications.
Interfacial Enhancement by r-Al2O3 of Electrochemical Oxidative Dehydrogenation of Ethane to Ethylene in Solid Oxide Electrolysis Cells.

Yuefeng Song,Le Lin,Weicheng Feng,Xiaomin Zhang,Qiao Dong,Xiaobo Li,Houfu Lv,Qingxue Liu,Fan Yang,Zhi Liu,Guoxiong Wang,Xinhe Bao

DOI: https://doi.org/10.1002/anie.201908388

2019-01-01

Abstract:Oxidative dehydrogenation of ethane (ODE) is limited by the facile deep oxidation and potential safety hazards. Now, electrochemical ODE reaction is incorporated into the anode of a solid oxide electrolysis cell, utilizing the oxygen species generated at anode to catalytically convert ethane. By infiltrating gamma-Al2O3 onto the surface of La0.6Sr0.4Co0.2Fe0.8O3-delta-Sm0.2Ce0.8O2-delta (LSCF-SDC) anode, the ethylene selectivity reaches as high as 92.5 %, while the highest ethane conversion is up to 29.1 % at 600 degrees C with optimized current and ethane flow rate. Density functional theory calculations and in situ X-ray photoelectron spectroscopy characterizations reveal that the Al2O3/LSCF interfaces effectively reduce the amount of adsorbed oxygen species, leading to improved ethylene selectivity and stability, and that the formation of Al-O-Fe alters the electronic structure of interfacial Fe center with increased density of state around Fermi level and downshift of the empty band, which enhances ethane adsorption and conversion.
Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor

Haihui Wang,You Cong,Weishen Yang

DOI: https://doi.org/10.1016/S0376-7388(02)00323-X

IF: 9.5

2002-01-01

Journal of Membrane Science

Abstract:A perovskite-type oxide of Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCFO) with mixed electronic and oxygen ionic conductivity at high temperatures was used as an oxygen-permeable membrane. A tubular membrane of BSCFO made by extrusion method has been used in the membrane reactor to exclusively transport oxygen for the partial oxidation of ethane (POE) to syngas with catalyst of LiLaNiO/γ-Al2O3 at temperatures of 800–900°C. After only 30min POE reaction in the membrane reactor, the oxygen permeation flux reached at 8.2mlcm−2min−1. After that, the oxygen permeation flux increased slowly and it took 12h to reach at 11.0mlcm−2min−1. SEM and EDS analysis showed that Sr and Ba segregations occurred on the used membrane surface exposed to air while Co slightly enriched on the membrane surface exposed to ethane. The oxygen permeation flux increased with increasing of concentration of C2H6, which was attributed to increasing of the driving force resulting from the more reducing conditions produced with an increase of concentration of C2H6 in the feed gas. The tubular membrane reactor was successfully operated for POE reaction at 875°C for more than 100h without failure, with ethane conversion of ∼100%, CO selectivity of >91% and oxygen permeation fluxes of 10–11mlcm−2min−1.
Oxidative dehydrogenation of propane in a dense tubular membrane reactor

Haihui Wang,You Cong,Xuefeng Zhu,Weishen Yang

DOI: https://doi.org/10.1023/A:1024502705982

2003-01-01

Reaction Kinetics and Catalysis Letters

Abstract:Oxidative dehydrogenation of propane (ODP) to propylene was investigated in a dense tubular membrane reactor made of Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ (BSCF) at 700 o C and 750 o C. The propylene selectivity in the membrane reactor (44.2%) is much higher than that in the fixed-bed reactor (15%) at the similar propane conversion (23-27%). Higher propylene selectivity in the membrane reactor was attributed to the lattice oxygen (O 2- ) supplied through the membrane.
Hollow Fiber Membrane Reactors for the Oxidative Activation of Ethane

Haihui Wang,Cristina Tablet,Thomas Schiestel,Juergen Caro

DOI: https://doi.org/10.1016/j.cattod.2005.11.093

IF: 5.3

2006-01-01

Catalysis Today

Abstract:A dense perovskite hollow fiber membrane made of the composition BaCoxFeyZrzO3−δ (BCFZ, x + y + z = 1) was fabricated by a phase inversion spinning followed by sintering. The oxygen permeation was investigated by operating with minor mass transfer resistance and oxygen partial pressure on the shell side and the core side of the hollow fiber membrane which can be adjusted by varying the air flow rates on the shell side (25–300 mL/min) and He flow rates on the core side (25–150 mL/min). A co-feed reactor and a periodically operated fixed-bed reactor were employed to estimate the BCFZ catalytic activity for the oxidative dehydrogenation of ethane to ethylene (ODE). Broken pieces of BCFZ pellets used in a packed bed reactor show that this perovskite possesses a moderate catalytic activity for the ODE at low temperature. For the first time the ODE was investigated in a hollow fiber membrane reactor made of the BCFZ. The best ethylene selectivity is about 64% which is lower than the 79% obtained in the BCFZ disk-shaped membrane. The reason is that the contact time on the two membrane configurations is different and the deeper oxidation of ethylene/ethane to CO and CO2 cannot be avoided in the hollow fiber membrane reactor.
Selective Oxidative Dehydrogenation of Ethane to Ethylene over a Hydroxylated Boron Nitride Catalyst

Lei Shi,Bing Yan,Dan Shao,Fan Jiang,Dongqi Wang,An-Hui Lu

DOI: https://doi.org/10.1016/s1872-2067(17)62786-4

2017-01-01

CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION)

Abstract:Boron nitride containing hydroxyl groups efficiently catalysed oxidative dehydrogenation of ethane to ethylene, offering rather high selectivity (95%) but only small amount of CO2 formation (0.4%) at a given ethane conversion of 11%. Even at high conversion level of 63%, the selectivity of ethylene retained at 80%, which is competitive with the energy-demanding industrialized steam cracking route. A long-term test for 200 h resulted in stable conversion and product selectivity, showing the excellent catalytic stability. Both experimental and computational studies have identified that the hydrogen abstraction of B-OH groups by molecular oxygen dynamically generated the active sites and triggered ethane dehydrogenation.
Electrochemical Activation of Surface Oxygen for Efficient Oxidative Dehydrogenation Reaction at Elevated Temperatures

Xiang Sun,Heejae Yang,Benchi Chen,Mengzhen Zhou,Yongjian Ye,Xiaobao Li,Hui Zhang,Bo Yu,Yifeng Li,Jeong Woo Han,Yan Chen

DOI: https://doi.org/10.1021/acscatal.3c04731

IF: 12.9

2024-01-01

ACS Catalysis

Abstract:Oxidative dehydrogenation (ODH) of alkane with CO2 as the oxidant has attracted worldwide attention as a promising approach for simultaneously producing valuable alkenes and greenhouse gas utilization. The selectivity and yield of the produced alkene, nevertheless, require further enhancement for practical applications. In this work, taking Sr2Ti0.8Co0.6Fe0.6O6-delta (STCF) as the electrode material, we demonstrate that a solid oxide electrolysis cell (SOEC) can efficiently catalyze the ODH of ethane to ethylene on the anode and reduce CO2 to CO at the cathode. The optimal yield of ethylene reached 66.3% at 800 degrees C, which is among the highest values reported in the literature. Such ethane ODH activity is attributed to the activation of surface oxygen on the STCF anode by electrolytic voltage, as revealed experimentally by advanced spectroscopic techniques. The density functional theory calculation further implied that the electrochemically driven formation of active oxygen species on the STCF surface upshifts the O 2p-band center, facilitates electron transfer, and enhances surface adsorption, leading to a strongly promoted dehydrogenation process. The results clarify the critical role of oxygen activity in determining the electrochemical ODH performance and can guide the rational design of catalysts for other electrosynthesis processes.
Development and Application of Oxygen Permeable Membrane in Selective Oxidation of Light Alkanes

Weishen Yang,Haihui Wang,Xuefeng Zhu,Liwu Lin

DOI: https://doi.org/10.1007/s11244-005-3820-6

IF: 2.781

2005-01-01

Topics in Catalysis

Abstract:In this paper, oxygen permeable membrane used in membrane reactor for selective oxidation of alkanes will be discussed in detail. The recent developments for the membrane materials will be presented, and the strategy for the selection of the membrane materials will be outlined. The main applications of oxygen permeable membrane in selective oxidation of light alkanes will be summarized, which includes partial oxidation of methane (POM) to syngas and partial oxidation of heptane (POH) to produce H2, oxidative coupling of methane (OCM) to C2, oxidative dehydrogenation of ethane (ODE) to ethylene and oxidative dehydrogenation of propane (ODP) to propylene. Achievements for the membrane material developments and selective oxidation of light alkanes in membrane reactor in our group are highlighted.
Partial Oxidation of Methane to Syngas in Tubular Oxygenper-Meable Reactor

Wang Haihui,Cong You,Yang Weishen

DOI: https://doi.org/10.1360/02tb9123

2002-01-01

Abstract:A dense Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3−δ membrane tube was prepared by the extruding method. Furthermore, a membrane reactor with this tubular membrane was successfully applied to partial oxidation of methane (POM) reaction, in which the separation of oxygen from air and the partial oxidation of methane are integrated in one process. At 875 °C, 94% of methane conversion, 98% of CO selectivity, 95% of H 2 selectivity, and as high as 8.8 mL/(min · cm 2 ) of oxygen flux were obtained. In POM reaction condition, the membrane tube shows a very good stability.
Selective Oxidation of Ch4 and C2h6 over A Mixed Oxygen Ion and Electron Conducting Perovskite-A Tap and Membrane Reactors Study

Evgenii V. Kondratenko,Haihui Wang,Vita A. Kondratenko,Juergen Caro

DOI: https://doi.org/10.1016/j.molcata.2008.09.015

2009-01-01

Abstract:In order to identify factors governing selectivity of an oxygen-conducting perovskite BaCoxFeyZrzO3−δ (BCFZ) membrane in the partial oxidation of methane and ethane, mechanistic aspects of product formation in these reactions were investigated with a millisecond time resolution using the temporal analysis of products (TAP) reactor. It was found that the selectivity depends on: (i) reduction degree of the perovskite surface; the higher the reduction degree, the higher the ethane and ethylene selectivity in methane and ethane oxidation, respectively, and (ii) contact time; short contact times favor partial selective oxidation. The influence of contact time on the ethylene selectivity in ethane oxidation at degrees of ethane conversion above 85% was experimentally proven in hollow fiber and disk membranes, which differ in the contact times.The low activity and selectivity in methane oxidation in the BCFZ perovskite membrane reactor were significantly increased, when the membrane on the hydrocarbon side was coated by a Ni-based steam reforming catalyst. This catalyst fulfils a double role: (i) it increases the oxygen transport through the perovskite membrane due to the high oxygen consumption, and (ii) it accelerates syngas production via deep methane oxidation followed by dry and steam reforming of methane. The syngas selectivity increases with an increase in the catalyst reduction degree, which is determined by the ratio of the rate of methane oxidation to the rate of oxygen permeation through the membrane.
Electrochemical dehydrogenation of ethane to ethylene in solid oxide electrolyzer

Jie Zhang,Lingting Ye,Kui Xie

DOI: https://doi.org/10.1016/j.ijhydene.2023.04.172

IF: 7.2

2023-05-07

International Journal of Hydrogen Energy

Abstract:Solid oxide electrolysis cell as an energy conversion device, has attracted much attention in recent years due to its high efficiency and capacity. In this work, we prepare the metal-oxide materials, Ce 0.9 (Ni x Cu 1- x ) 0.1 O 2- δ (x = 0–1), and alloy Ni/Cu nanoparticles are exsolved from the CeO 2 surface after treatment in an H 2 /Ar reducing atmosphere, which is formed the metal-oxide interfaces. The current density reaches 0.51 A cm −2 at 700 °C, 1.0 V and the ethane conversion rate is 38.9% with the ethylene yield of 24.9%, and it demonstrates outstanding stability even after being operated continuously for a period of one hundred hours. The material with in-situ precipitation metal-oxide interface shows significantly enhanced ethane electrolytic activity, which is also confirmed by density functional theory. This work demonstrates the potential application of electrochemical ethane oxidative dehydrogenation.

energy & fuels,electrochemistry,chemistry, physical
Promotion of Catalytic Selectivity on Transition Metal Oxide Through Restructuring Surface Lattice

Juanjuan Liu,Victor Fung,Yong Wang,Kaimin Du,Shiran Zhang,Luan Nguyen,Yu Tang,Jie Fan,De-en Jiang,Franklin Feng Tao

DOI: https://doi.org/10.1016/j.apcatb.2018.05.013

2018-01-01

Abstract:Pursuit of high catalytic selectivity is paramount in the design of catalysts for green chemical processes towards minimizing the production of undesired products. We demonstrated that catalytic selectivity for production of alkene through oxidative dehydrogenation of alkane on transition metal oxides can be promoted through tailoring the surface lattice of the oxide catalyst. Selectivity for production of ethylene through oxidative dehydrogenation (ODH) of ethane on Co3O4 nanocrystals can be substantially increased by 30%-35% via temperature-mediated reconstruction of surface lattice of Co3O4. Co3O4 nanocrystals formed at 800 degrees C leads to smooth, flat crystal plane with predominantly exposed (111) facet in contrast to high Miller index (311) facet of Co3O4 formed at <= 700 degrees C, revealed by environmental transmission electron microscopy. Isotope-labelled experiments suggest that the higher catalytic selectivity on the (111) facet results from the lower activity of its surface lattice oxygen atoms. Consistent with these experimental results, DFT calculations suggest low activity of surface lattice oxygen atoms and high activation barriers for adsorption and dissociation of C-H bond on the (111) surface in contrast to (311). Upon the activation of C-H on (311), the stronger binding of ethylene on more active, under coordinated surface lattice oxygen atoms of (311) forms a robust "deprotonated ethylene glycol"-like intermediate on (311) with a rate-limiting desorption barrier to the formation of ethylene. Compared to (311), the kinetically favorable desorption of bound ethylene species from (111) surface well rationalized the higher selectivity for production of ethylene on (111) than (311). These findings demonstrate that temperature-mediated tailoring of the surface lattice for a transition metal oxide nanocatalyst is a promising approach in pursuing high selectivity in oxidative dehydrogenation of hydrocarbons.
Novel Sr1.95Fe1.4Co0.1Mo0.5O6-δ anode heterostructure for efficient electrochemical oxidative dehydrogenation of ethane to ethylene by solid oxide electrolysis cells

Minghan Qin,Shixian Zhang,Wang Sun,Chunming Xu,Jinshuo Qiao,Zhenhua Wang,Shuying Zhen,Kening Sun

DOI: https://doi.org/10.1016/j.ceramint.2023.06.274

IF: 5.532

2023-06-01

Ceramics International

Abstract:The electrocatalytic conversion of ethane to ethylene is an important industrial process since ethylene is useful for the production of various chemical intermediates and polymers. However, this process often requires high temperatures. Metal-oxide heterogeneous interfaces constructed by in-situ exsolved process under reducing conditions would be favorable for promoting the catalyst activity, selectivity, and stability of ethane conversion to ethylene. Herein, Sr1.95Fe1.4Co0.1Mo0.5O6-δ (abbreviated as SFCoM) was prepared as a novel anode material of solid oxide electrolysis cells (SOECs) for green ethylene production by electrochemical oxidative dehydrogenation of ethane. After reduction, nano CoFe particles were in-situ exsolved on SFCoM oxides to form a nano alloy-oxide heterostructure (CoFe@SFCoM) with large numbers of reactive sites, relevant for improving the conversion rate of ethane and the yield of ethylene. At 800 °C, the single cell based on CoFe@SFCoM anode exhibited a current density of 1.89 A cm−2 at 1.6 V with an ethane conversion rate of 36.4% and corresponding ethylene selectivity of 94.5%. After 50 h of testing, the electrolysis current density(∼0.5 A cm−2) and ethylene yield(∼18.43%) of the single cell did not change significantly, showing good stability. In sum, CoFe@SFCoM looks very promising for future use as a SOECs anode for the electro-catalytic conversion of ethane to ethylene.

materials science, ceramics
Interpreting Nonoxidative Ethane Dehydrogenation in an Open Tube Reactor

Alexander L. Brown,Christopher R. Riley,Abhaya K. Datye,Andrew De La Riva,Erik D. Spoerke

DOI: https://doi.org/10.1021/acs.iecr.3c00835

2024-03-28

Industrial & Engineering Chemistry Research

Abstract:Several recent studies on the nonoxidative dehydrogenation of ethane to form ethylene have suggested this may be a promising pathway to upgrade products from ethane. The experiments of Riley et al. provide conversion, selectivity, and yield data for ethylene synthesis using bench-scale reactors with three different materials of construction at furnace temperature settings in the range of 575–700 °C. Despite being a gas phase reaction, there were significant differences between the quartz, alumina, and stainless-steel reactor tubes. Here, we present an analysis by simulation of the reported experimental results via simplified 1-step kinetic modeling using thermal and flow solvers. The stainless steel and alumina reactor results were fit to one reaction rate, while the quartz tube necessitated a separate mechanism to best fit the experimental results. The quartz tube reactions are faster than the Riley et al. stainless and alumina data as well as the published rate data from other sources. Alumina and stainless tube results, which were fit together, were also significantly faster than those suggested by published rates.

engineering, chemical
Oxygen Permeation and Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3−δ Oxygen Permeation Membrane

Shidong Song,Peng Zhang,Minfang Han,Subhash C. Singhal

DOI: https://doi.org/10.1016/j.memsci.2012.05.046

IF: 9.5

2012-01-01

Journal of Membrane Science

Abstract:Dense perovskite materials exhibiting mixed ionic and electronic conductivity can be used as a membrane material for the production of oxygen of very high purity and in partial oxidation of methane to syngas in membrane reactors. They represent an attractive technology which is energy- and cost-efficient in comparison with conventional technologies in those fields. Currently, one of the most promising membrane materials is BaCo0.7Fe0.2Nb0.1O3−δ perovskite which possesses very high oxygen permeation flux. However, its stability is not satisfactorily high. In this work, Ba0.9Co0.7Fe0.2Nb0.1O3−δ perovskite was prepared by introducing A-site deficiency into BaCo0.7Fe0.2Nb0.1O3−δ and expected to enhance the stability and as well as the oxygen permeability. Under an air/helium oxygen gradient, the oxygen permeation flux of 1 mm thick Ba0.9Co0.7Fe0.2Nb0.1O3−δ membrane was 1.8 ml min−1 cm−2 at 875 °C, which is slightly higher than that of BaCo0.7Fe0.2Nb0.1O3−δ membrane under the similar condition. A 400 h durability test of Ba0.9Co0.7Fe0.2Nb0.1O3−δ membrane for POM reaction at 875 °C showed no degradation in the measured oxygen permeation flux and methane conversion, which indicated that Ba0.9Co0.7Fe0.2Nb0.1O3−δ had a significantly better stability than BaCo0.7Fe0.2Nb0.1O3−δ and could be a promising material for oxygen generator.
Oxidation/Reforming Methane Oxidation Processes Based on Dense Tubular La0.6Sr0.4Co0.2Fe0.8O3-d Membrane Reactor

Yanlong Nie,Jianxin Yi,Shaojie Feng

DOI: https://doi.org/10.14233/ajchem.2013.oh85

2013-01-01

Abstract:An oxidation/reforming membrane reactor accompanied with dense tubular La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) and Ni/gamma-Al2O3 reforming catalyst was used for methane conversion to syngas. The reaction processes was identified by comparing reaction behaviour in the membrane reactor and a blank reactor without catalyst in details. At 900 degrees C, the methane conversion reached up to 33 %, CO selectivity (S-CO) was almost 100 %, H-2/CO molar ratio in effluent was 1.9-2.1 with membrane inner surface area 4.1 cm(2), F-He = 30 mL.min(-1), F-CH4 = 2 mL min(-1). The XRD and SEM results confirmed that the perovskite structure of LSCF membrane was preserved during the reaction. The structure stability of LSCF membrane owe to the moderate methane oxidation reaction in membrane stage.
Oxidative Coupling of Methane over SrO/La2O3 Catalyst in an Oxygen-Permeable Separation Membrane Reactor

Hui Lu,Qiuping Zhang,Renzhi Liu,Jianzhou Gui

DOI: https://doi.org/10.1007/s10562-020-03440-4

IF: 2.936

2020-11-02

Catalysis Letters

Abstract:Oxidative coupling of methane (OCM) over SrO/La2O3 catalyst was studied in a densely perovskite-type Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) mixed-conducting membrane reactor at high temperatures. Oxygen permeation fluxes of the perovskite-type BSCF functional membranes were measured at 973–1123 K, and the membrane surfaces were also studied by SEM for the membranes before and after the catalytic OCM reaction. High selectivity to C2 products was achieved in the oxygen-permeable BSCF mixed-conducting membrane reactor, and the highest C2 yield of 11.6% was obtained in the oxygen-separation membrane reactor at 1123 K. The perovskite-type BSCF mixed-conducting membrane reactor also exhibited good stability for the catalytic OCM membrane reaction during 30-hour preliminary operation.

chemistry, physical
Improved Water Dissociation and Nitrous Oxide Decomposition by in Situ Oxygen Removal in Perovskite Catalytic Membrane Reactor

Heqing Jiang,Haihui Wang,Fangyi Liang,Steffen Werth,Steffen Schirrmeister,Thomas Schiestel,Juergen Caro

DOI: https://doi.org/10.1016/j.cattod.2010.02.027

IF: 5.3

2010-01-01

Catalysis Today

Abstract:The equilibrium controlled water dissociation and the kinetically controlled nitrous oxide (N2O) decomposition were studied in the perovskite BaCoxFeyZr1−x−yO3−δ (BCFZ) oxygen-permeable membrane reactor. By increasing the temperature or pressure difference and by feeding reducing gases like methane or ethane to the permeate side to consume the permeated oxygen, hydrogen production rate or N2O conversion could be enhanced. A hydrogen production rate of 3.1cm3min−1cm−2 was obtained at 950°C. When methane was used as the reducing gas on the shell side, the oxygen concentration on the N2O side can be kept at a low level, thus avoiding the inhibition of the N2O decomposition by adsorbed surface oxygen species. A complete decomposition of N2O for gas streams containing 20vol.% N2O was achieved on the core side at 850°C. Simultaneously, methane on the shell side was converted into synthesis gas with CO yield of above 80%. When feeding ethane to the shell side, the hydrogen from the thermal dehydrogenation of ethane can consume the permeated oxygen. At 850°C, an ethane conversion of 85% and an ethylene selectivity of 86% were obtained.
Bi4Cu0.2V1.8O11−δ Based Electrolyte Membrane Reactor for Selective Oxidation of Propane to Acrylic Acid

Jibo Wang,Baofeng Ji,Wenling Chu,Shijing Zhan,Liwu Lin,Weishen Yang

DOI: https://doi.org/10.1016/j.cattod.2009.04.017

IF: 5.3

2009-01-01

Catalysis Today

Abstract:An electrochemical membrane reactor using Bi4Cu0.2V1.8O11−δ as a solid electrolyte membrane was employed to investigate the selective oxidation of propane to acrylic acid over a MoV0.3Te0.17Nb0.12O catalyst. By applying an external current to the membrane reactor, the ionic oxygen was pumped to the surface of the MoV0.3Te0.17Nb0.12O catalyst, which exhibited higher conversion of propane and selectivity to acrylic acid than that in the fixed-bed reactor. The results indicate that the enhancement of catalytic performance in the membrane reactor is mainly due to the presence of the lattice oxygen, which has been proved to be necessary for the formation of acrylic acid. Thus, the Au/Bi4Cu0.2V1.8O11−δ/Au/MoVTeNbO membrane reactor achieved a higher conversion of propane (42%) and selectivity to acrylic acid (79.6%) at 380°C with a 0.6A current.
Study on Oxidative Coupling of Methane in Oxygen Permeable Tubular Membrane Reactor

HH Wang,Y Cong,WS Yang,LW Lin

DOI: https://doi.org/10.3321/j.issn:0253-9837.2003.03.004

2003-01-01

Abstract:Mixed-conducting oxygen permeable membrane is a kind of ceramic membrane, which exhibits both electronic and oxygen ionic conductivity. At high temperature, oxygen can permeate through the membrane in the form of oxygen ions. So on the membrane surface, there are many oxygen species (O-, O-2(-), O-2(2-) and O-2(-)), which can improve C-2 selectivity of oxidative coupling of methane (OCM). A dense tubular membrane made of Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCFO) was prepared by the plastic extrusion method. OCM was investigated in the tubular membrane reactor. C-2 production rate in the BSCFO membrane reactor is much higher than that in La0.6Sr0.4Co0.8Fe0.2O3-delta ( LSCFO) and La-Ba-Co-Fe-O (LBCFO) membrane reactors. The reason is that the vacancy concentration in the BSCFO is higher than that in the LSCFO and LBCFO. The higher vacancy concentration not only accelerates the diffusion rate of oxygen ion but also increases the activation rate of methane. So the BSCFO is more active for OCM than the LSCFO and LBCFO. The C-2 production rate increases with the increase of temperature and methane concentration in the feed. However, the C-2 selectivity is determined by the competitive result of oxygen ion recombination and OCM reaction. High rate of oxygen ion recombination will decrease the C-2 selectivity. The methane conversion increases while C-2 selectivity decreases with the increase of oxygen partial pressure in the oxygen-rich side. This result indicates that the gas-phase reaction plays an important role in the OCM reaction. There is a large amount of O-2 in the products which results in the modest increase of the oxygen permeation flux, compared with the case of air/He.

High Selectivity Of Oxidative Dehydrogenation Of Ethane To Ethylene In An Oxygen Permeable Membrane Reactor

Continuous Oxygen Ion Transfer Medium As a Catalyst for High Selective Oxidative Dehydrogenation of Ethane

Interfacial Enhancement by r-Al2O3 of Electrochemical Oxidative Dehydrogenation of Ethane to Ethylene in Solid Oxide Electrolysis Cells.

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor

Oxidative dehydrogenation of propane in a dense tubular membrane reactor

Hollow Fiber Membrane Reactors for the Oxidative Activation of Ethane

Selective Oxidative Dehydrogenation of Ethane to Ethylene over a Hydroxylated Boron Nitride Catalyst

Electrochemical Activation of Surface Oxygen for Efficient Oxidative Dehydrogenation Reaction at Elevated Temperatures

Development and Application of Oxygen Permeable Membrane in Selective Oxidation of Light Alkanes

Partial Oxidation of Methane to Syngas in Tubular Oxygenper-Meable Reactor

Selective Oxidation of Ch4 and C2h6 over A Mixed Oxygen Ion and Electron Conducting Perovskite-A Tap and Membrane Reactors Study

Electrochemical dehydrogenation of ethane to ethylene in solid oxide electrolyzer

Promotion of Catalytic Selectivity on Transition Metal Oxide Through Restructuring Surface Lattice

Novel Sr1.95Fe1.4Co0.1Mo0.5O6-δ anode heterostructure for efficient electrochemical oxidative dehydrogenation of ethane to ethylene by solid oxide electrolysis cells

Interpreting Nonoxidative Ethane Dehydrogenation in an Open Tube Reactor

Oxygen Permeation and Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3−δ Oxygen Permeation Membrane

Oxidation/Reforming Methane Oxidation Processes Based on Dense Tubular La0.6Sr0.4Co0.2Fe0.8O3-d Membrane Reactor

Oxidative Coupling of Methane over SrO/La2O3 Catalyst in an Oxygen-Permeable Separation Membrane Reactor

Improved Water Dissociation and Nitrous Oxide Decomposition by in Situ Oxygen Removal in Perovskite Catalytic Membrane Reactor

Bi4Cu0.2V1.8O11−δ Based Electrolyte Membrane Reactor for Selective Oxidation of Propane to Acrylic Acid

Study on Oxidative Coupling of Methane in Oxygen Permeable Tubular Membrane Reactor