Oxygen Permeation and Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3−δ Oxygen Permeation Membrane

Shidong Song,Peng Zhang,Minfang Han,Subhash C. Singhal

DOI: https://doi.org/10.1016/j.memsci.2012.05.046

IF: 9.5

2012-01-01

Journal of Membrane Science

Abstract:Dense perovskite materials exhibiting mixed ionic and electronic conductivity can be used as a membrane material for the production of oxygen of very high purity and in partial oxidation of methane to syngas in membrane reactors. They represent an attractive technology which is energy- and cost-efficient in comparison with conventional technologies in those fields. Currently, one of the most promising membrane materials is BaCo0.7Fe0.2Nb0.1O3−δ perovskite which possesses very high oxygen permeation flux. However, its stability is not satisfactorily high. In this work, Ba0.9Co0.7Fe0.2Nb0.1O3−δ perovskite was prepared by introducing A-site deficiency into BaCo0.7Fe0.2Nb0.1O3−δ and expected to enhance the stability and as well as the oxygen permeability. Under an air/helium oxygen gradient, the oxygen permeation flux of 1 mm thick Ba0.9Co0.7Fe0.2Nb0.1O3−δ membrane was 1.8 ml min−1 cm−2 at 875 °C, which is slightly higher than that of BaCo0.7Fe0.2Nb0.1O3−δ membrane under the similar condition. A 400 h durability test of Ba0.9Co0.7Fe0.2Nb0.1O3−δ membrane for POM reaction at 875 °C showed no degradation in the measured oxygen permeation flux and methane conversion, which indicated that Ba0.9Co0.7Fe0.2Nb0.1O3−δ had a significantly better stability than BaCo0.7Fe0.2Nb0.1O3−δ and could be a promising material for oxygen generator.