Abstract:Perovskite-type oxygen transport membrane (OTM) has considerable potential in the application of oxygen-enriched combustion, which can prepare low-cost, low-energy, and high-purity oxygen. BaCoO 3- δ -based OTM, as a promising candidate, possesses high oxygen permeability, but poor stability limits its application. In this study, the strategy of Y 3+ and W 6+ co-doping BaCo 0.8 Y 0.2- x W x O 3- δ (BCYW- x ) was proposed firstly to control the trade-off effect between oxygen permeability and stability by considering the radius and valence of ions. Y 3+ and W 6+ co-doping stabilize the perovskite cubic structure to room temperature of the BCYW- x , and the average bond energy of metal-oxygen increases with W 6+ doping, enhancing the structure stability. Although oxygen vacancy concentration and critical radius decrease, the migration of oxygen ions is accelerated with the increase of W 6+ content at high temperatures. The BCYW-0.1 shows the exceptional oxygen permeation flux of 1.90 mL・cm -2 ・min -1 at 900 °C and stably operates at 900 °C and 800 °C. Furthermore, the kinetic model calculation indicates that the permeation resistance decreases because of the acceleration of the oxygen surface exchange reaction as W 6+ doping, contributing to the oxygen permeation process. This study provides a feasible and effective co-doping strategy to improve the oxygen permeability and stability of perovskite OTMs simultaneously.

High performance oxygen permeation membrane: Sr and Ti co-doped BaFeO3-δ ceramics

Tantalum stabilized SrCoO3-δ perovskite membrane for oxygen separation

A novel zincum-doped perovskite-type ceramic membrane for oxygen separation

Novel Cobalt-Free Tantalum-Doped Perovskite BaFe1−yTayO3−δ with High Oxygen Permeation

Optimization of BaxSr1−xCo0.9Nb0.1O3−δ Perovskite As Oxygen Semi-Permeable Membranes by Compositional Tailoring

Materials Design for Ceramic Oxygen Permeation Membranes: Single Perovskite Vs. Single/double Perovskite Composite, a Case Study of Tungsten-Doped Barium Strontium Cobalt Ferrite

Cobalt-free gadolinium-doped perovskite Gd x Ba 1 -x FeO 3 -δ as high-performance materials for oxygen separation

Re-evaluation of Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite as oxygen semi-permeable membrane

Structural Stability and Oxygen Permeability of Cerium Lightly Doped BaFeO3−δ Ceramic Membranes

Oxygen Permeation and Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3−δ Oxygen Permeation Membrane

Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3-δ Oxygen Permeation Membrane with Three-Layer Structure

A stable Zr-Y co-doped perovskite BaCo0.4Fe0.4Zr0.1Y0.1O3−δ ceramic membrane for highly efficient oxygen separation

Non-metallic Cation and Anion Co-Doped Perovskite Oxide Ceramic Membranes for High-Efficiency Oxygen Permeation at Low Temperatures

High-flux dual-phase percolation membrane for oxygen separation

Advancing oxygen separation: insights from experimental and computational analysis of La0.7Ca0.3Co0.3Fe0.6M0.1O3−δ (M = Cu, Zn) oxygen transport membranes

A co-doped strategy for simultaneously improving oxygen permeability and stability of BaCoO 3- δ ceramic membrane

Novel Bifunctional Tantalum and Bismuth Co-Doped Perovskite Babi0.05co0.8ta0.15o3-Delta with High Oxygen Permeation

Effect of foreign oxides on the phase structure, sintering and transport properties of Ba 0.5Sr 0.5Co 0.8Fe 0.2O 3-anddelta; as ceramic membranes for oxygen separation

Dual Phase Composite Oxide of Ce0.9Gd0.1O2-δ-Ba0.5Sr0.5Co0.8Fe0.2O3-δwith Excellent Oxygen Permeation

Ca substitution in Ca1‐xSrxTi0.8Fe0.2O3‐δ perovskites for oxygen transport membranes: A promising strategy to improve CO2 tolerance

A Dense Oxygen Separation Membrane with A Layered Morphologic Structure