Abstract:A series of mixed ionic–electronic conducting materials, BaCo0.7Fe0.3−xZrxO3−δ (x=0–0.12) were successfully synthesized and evaluated as potential ceramic membrane materials for oxygen separation applications. Effects of zirconium content on the crystal structure, internal and surface morphologies, electrical conductivity, structural stability and oxygen permeability of these membranes were systematically studied. A basic perovskite structure was for x=0.04–0.12, and the grain size of the samples gradually decreases with increasing zirconium content. The structural stabilities of the membranes in different atmospheres (H2, O2 and CO2) are significantly improved by substituting an appropriate amount of iron by zirconium. However, increase of the zirconium content also leads to a decrease in the electrical conductivity, which is confirmed by the first principles calculations. With increasing the zirconium content, oxygen permeation flux of the membranes increases and reaches a peak at x=0.06, and then decreases. The highest oxygen permeation flux of 2.7mlmin−1cm−2 at 925°C is achieved by the 1mm-thick BaCo0.7Fe0.24Zr0.06O3−δ membrane. With the same zirconium content, samples with larger grain sizes have remarkably higher oxygen permeation flux. Both theoretical and experimental works indicate that the oxygen permeability depends on the combined effect of the oxygen vacancy concentration, grain size and electrical conductivity.

Materials Design for Ceramic Oxygen Permeation Membranes: Single Perovskite Vs. Single/double Perovskite Composite, a Case Study of Tungsten-Doped Barium Strontium Cobalt Ferrite

A novel zincum-doped perovskite-type ceramic membrane for oxygen separation

Tantalum stabilized SrCoO3-δ perovskite membrane for oxygen separation

High performance oxygen permeation membrane: Sr and Ti co-doped BaFeO3-δ ceramics

Optimization of BaxSr1−xCo0.9Nb0.1O3−δ Perovskite As Oxygen Semi-Permeable Membranes by Compositional Tailoring

A co-doped strategy for simultaneously improving oxygen permeability and stability of BaCoO 3- δ ceramic membrane

A stable Zr-Y co-doped perovskite BaCo0.4Fe0.4Zr0.1Y0.1O3−δ ceramic membrane for highly efficient oxygen separation

Zirconium Stabilized Ba0.5Sr0.5(Co0.8−xZrx)Fe0.2O3−α Perovskite Hollow Fibre Membranes for Oxygen Separation

Synthesis, Oxygen Permeability, and Structural Stability of BaCo0.7Fe0.3−xZrxO3−δ Ceramic Membranes

Re-evaluation of Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite as oxygen semi-permeable membrane

Ba(Sr) Zr(CoFe) O 3-particle-dispersed Ba 0.5Sr 0.5Co 0.8Fe 0.2O 3-δ mixed conductor composite

A novel cobalt-free CO2-stable perovskite-type oxygen permeable membrane

Effect of foreign oxides on the phase structure, sintering and transport properties of Ba 0.5Sr 0.5Co 0.8Fe 0.2O 3-anddelta; as ceramic membranes for oxygen separation

A Dense Oxygen Separation Membrane with A Layered Morphologic Structure

Non-metallic Cation and Anion Co-Doped Perovskite Oxide Ceramic Membranes for High-Efficiency Oxygen Permeation at Low Temperatures

Novel Approach for Developing Dual-Phase Ceramic Membranes for Oxygen Separation through Beneficial Phase Reaction

Cobalt-free gadolinium-doped perovskite Gd x Ba 1 -x FeO 3 -δ as high-performance materials for oxygen separation

Advancing oxygen separation: insights from experimental and computational analysis of La0.7Ca0.3Co0.3Fe0.6M0.1O3−δ (M = Cu, Zn) oxygen transport membranes

Effects Of B-Site Doped Elements In The Electronic-Conducting Perovskite Phase On The Property Of Dual-Phase Membranes

Phase transition and oxygen permeability of Pr0.6Sr0.4FeO3- ceramic membrane at high temperature

Structural Stability and Oxygen Permeability of Cerium Lightly Doped BaFeO3−δ Ceramic Membranes