Abstract:CO2-stable oxygen-permeable Fe2O3 (FO) - Ce0.9Gd0.1O2-delta (CGO) dual phase composite membranes of the composition chi wt % FO - (100 - chi) wt % CGO with chi = 25, 40, 50 were successfully prepared via a one-pot single-step method. X-ray diffraction (XRD) demonstrated that all FO - CGO composite membranes after sintering at 1300 degrees C for 5 h represent a microscale mixture of only the two pure phases FO and CGO. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDXS), and oxygen permeation revealed that the microstructure of the composition of the chi FO - (100 chi) CGO dual phase membranes has a great influence on the oxygen permeability including its time-dependence. It was found that the composition of 40FO - 60CGO displays the highest oxygen permeability. An oxygen permeation flux of 0.18 mL/min.cm(2) was obtained through the uncoated 40FO - 60CGO membrane with a thickness of 0.5 mm under an air/He oxygen gradient at 1000 degrees C. In situ XRD demonstrates that the 40FO - 60CGO material possesses a good phase stability not only in an atmosphere of 50 vol % CO2/50 vol % Ar but also in other atmospheres with a low oxygen partial pressure like reduced pressure (vacuum) and 5 vol % H-2/95 vol 96 He. After coating the 40FO - 60CGO dual phase membrane with a porous La0.6Sr0.4CoO3-delta (LSC) layer of a few pm thicknesses on the air side, the oxygen permeation flux reaches the steady state immediately. This steady oxygen permeation flux of the LSC coated membrane was found to be 0.20 mL/min.cm(2) unchanged for more than 150 h even when pure CO2 was used as the sweep gas) which indicates that the coated 40FO - 60CGO dual phase membrane is CO2 stable.

Performance of Ba0.9Co0.7Fe0.2Nb0.1O3-δ-Gd0.1Ce0.9O2-δDual-phase Oxygen Permeation Membrane

Dual Phase Composite Oxide of Ce0.9Gd0.1O2-δ-Ba0.5Sr0.5Co0.8Fe0.2O3-δwith Excellent Oxygen Permeation

CO2-Tolerant Oxygen-Permeable Fe2O3-Ce0.9Gd0.1O2-δDual Phase Membranes

A CO2-tolerance Oxygen Permeable 60ce0.9gd0.1o2−δ–40ba0.5sr0.5co0.8fe0.2o3−δ Dual Phase Membrane

Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3-δ Oxygen Permeation Membrane with Three-Layer Structure

Excellent and CO$_2$$_{0.85}$Nd$_{0.1}$Cu$_{0.05}$O$_{2-δ}$-Nd$_x$Sr$_{1-x}$Fe$_{1-y}$Cu$_y$O$_{3-δ}$ dual-phase oxygen transport membranes

Oxygen Permeation and Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3−δ Oxygen Permeation Membrane

Novel Cobalt-Free, Noble Metal-Free Oxygen-Permeable 40Pr0.6sr0.4feo3-Δ–60ce0.9pr0.1o2−δ Dual-Phase Membrane

Performance of U-shaped BaCo0.7Fe0.2Ta0.1O3−δ Hollow-Fiber Membranes Reactor with High Oxygen Permeation for Methane Conversion

Investigation of Co–doped Ce0.8Sm0.2O2–δ–Ba0.95La0.05Zr0.1Fe0.9–xCoxO3–δDual–phase Oxygen Transport Membranes

Oxygen Permeability and Structure Stability of a Novel Cobalt-Free Perovskite Gd0.33Ba0.67FeO3−δ

Influence of the Preparation Methods on the Microstructure and Oxygen Permeability of a CO2‐stable Dual Phase Membrane

CO2-stable Ce0.9Gd0.1O2−δ-perovskite Dual Phase Oxygen Separation Membranes and the Application in Partial Oxidation of Methane to Syngas

Performance of La0.6 Sr0.4 Co0.2 Fe0.8 O3-δ--Gd0.1 Ce0.9 O1.95 Dual Phase Material

Evaluation of La0.7Ca0.3Cr0.95Zn0.05O3–δ–Gd0.1Ce0.9O2–δ Dual-phase Material and Its Potential Application in Oxygen Transport Membrane

High flux asymmetric oxygen permeation membrane based on BaFe0.95Sm0.05O3--Ce0.9Sm0.1O2- dual-phase composite

Single- and Dual-Phase Capillary Membranes Prepared Through Plastic Extrusion Method for Oxygen Permeation

Cobalt-free gadolinium-doped perovskite Gd x Ba 1 -x FeO 3 -δ as high-performance materials for oxygen separation

High-flux dual-phase percolation membrane for oxygen separation

U-Shaped BaCo0.7Fe0.2Ta0.1O3−δ Hollow-Fiber Membranes with High Permeation for Oxygen Separation

High CO2-tolerance oxygen permeation dual-phase membranes Ce0.9Pr0.1O2-δ-Pr0.6Sr0.4Fe0.8Al0.2O3-δ