Abstract:Syngas production by the partial oxidation reforming of methane is a promising technology with a simple setup and quick dynamic response, which has great potential for application in small-scale fuel cells and portable power units. In this study, a catalytically enhanced porous media combustor for partial oxidation reforming is designed and tested. In the combustor, fuel-rich combustion in porous media and catalytic partial oxidation are integrated, benefitting from the merits of both technologies. Without external heat source, the combustor is directly ignited with a stoichiometric gas mixture during the cold startup process, and then adjusted to the partial oxidation conditions. Three zones, a preheating zone, an oxidation zone involving exothermic reactions, and a reforming zone involving endothermic reactions, are observed, which significantly affect the temperature profile in the axial direction. Considering both the methane conversion and reforming efficiency, the optimal equivalence ratio range for self-sustained operation is found to be 2.0-2.4. At an equivalence ratio of 2.0, the effect of the gas velocity on the temperature profile and gas composition of products are studied experimentally. At an equivalence ratio of 2.4 and a gas velocity of 0.13 m/s, the reforming efficiencies of the reactor reach 61.5% and 64.8% when 0.5 wt% Pd and 0.5 wt% Rh, respectively, are introduced to the second layer of the porous media. The carbon deposition at different axial positions of the reactor is analyzed, and the results indicate that carbon deposition by methane pyrolysis in the high-temperature oxidation zone is the dominating cause of carbon deposition. A re-ignition process at stoichiometric condition is helpful for the elimination of carbon.

Partial Oxidation of Methane to Syngas in Tubular Oxygenper-Meable Reactor

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor

Study on Oxidative Coupling of Methane in Oxygen Permeable Tubular Membrane Reactor

Partial Oxidation of Methane to Syngas in a Perovskite Hollow Fiber Membrane Reactor

Partial oxidation of methane in hollow‐fiber membrane reactors based on alkaline‐earth metal‐free CO2‐tolerant oxide

Syngas Production in a Novel Perovskite Membrane Reactor with Co-Feed of CO2

Oxidative Coupling of Methane in Ba0.5Sr0.5Co0.8Fe0.2O3−δ Tubular Membrane Reactors

Coupling water splitting and partial oxidation of methane (POM) in Ag modified La0.8Ca0.2Fe0.94O3-δ hollow fiber membrane reactors for co-production of H2 and syngas

Oxygen Selective Ceramic Hollow Fiber Membranes for Partial Oxidation of Methane

Performance of U-shaped BaCo0.7Fe0.2Ta0.1O3−δ Hollow-Fiber Membranes Reactor with High Oxygen Permeation for Methane Conversion

Performance of a ceramic membrane reactor with high oxygen flux Ta-containing perovskite for the partial oxidation of methane to syngas

Partial Oxidation of Methane to Syngas in BaCe 0.15 Fe 0.85 O 3−δ Membrane Reactors

A Theoretical Analysis on Oxidative Coupling of Methane in Tubular Dense Membrane Reactor

Partial Oxidation of Methane to Syngas over Cr2o3 Catalysts

Partial Oxidation of Methane in Porous Reactor: Part I. Unidirectional Flow

Catalytic partial oxidation of methane over rhodium coated foam monolith

Oxidative Coupling of Methane over SrO/La2O3 Catalyst in an Oxygen-Permeable Separation Membrane Reactor

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

CO2-stable Ce0.9Gd0.1O2−δ-perovskite Dual Phase Oxygen Separation Membranes and the Application in Partial Oxidation of Methane to Syngas

Oxidative dehydrogenation of propane in a dense tubular membrane reactor

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor