Abstract:Natural gas with methane as the main constituent is a natural resource that exceeds the reserves of oil in abundance. With inevitable depletion of crude oil, methane will become the major resource for chemicals and liquid fuels in future decades. Extensive efforts have been afforded to both direct and indirect conversion of methane. The direct-conversion approaches involve, for example, the selective oxidation of methane to methanol or formaldehyde, the oxidative coupling of methane (OCM) to C2 species (C2H6 and C2H4) and so on. Since the pioneering work of Keller and Bhasin, much research has been carried out into developing highly efficient catalysts for OCM. Unfortunately, the per pass C2 yields on nearly all reported catalysts are less than 30 %. OCM is believed to occur through a heterogeneous–homogeneous pathway. The mechanism proposes first the catalytic formation of methyl groups on catalyst surface, which desorb as free radicals (CH3·) into the gas phase and ultimately react by predominantly homogeneous pathways. 8] It is generally agreed that some oxygen species O* adsorbed on the catalyst surface are the active oxygen species for the activation of methane to form methyl radicals and play a key role in the selective generation of C2, whereas gaseous oxygen molecules mainly favor the formation of COx. [9–12] By assuming a reaction mechanism via methyl radicals formed by the reaction of methane with surface oxygen species, an upper limit of 28 % for the C2 yield is forecasted for a continuous, CH4/O2 co-fed, single pass process under conventional conditions, such as those used for laboratory screening. The inherent reason for such a limited C2 yield is that the gaseous oxygen—as required oxidant for OCM—can react with the more reactive C2 product to form COx and, thus, a higher C2 selectivity is always compromised with a lower CH4 conversion. [14] To attain a high C2 yield, it is necessary to reduce the nonselective gaseous oxygen concentration. Perovskite oxides with mixed conductivities have been attracting increasing attention due to their potential applications in air separation, as catalysts for selective oxidation, and as reactors for the partial oxidation of hydrocarbons or for other oxygen-involving reactions. Moreover, in the past decade, halide-modified oxides have been widely studied for oxidative dehydrogenation of ethane (ODE) to ethylene and were proven to offer a significant improvement in the performance of the selective oxidation. In this study, a novel chlorinedoped Ba0.5Sr0.5Fe0.2Co0.8O3 d (denoted as BSCFCls) was used as catalyst for the OCM in a fixed-bed reactor. Furthermore, N2O was chosen as the oxygen source because it is a relatively weak oxidant, which is suitable for selective oxidation. Herein, we want to show that (a) the introduction of Cl into Ba0.5Sr0.5Fe0.2Co0.8O3 d enhances the selectivity for the methyl radical formation and (b) N2O as oxidant can effectively reduce gaseous oxygen concentration, since it provides oxygen in the form of surface oxygen species rather than gas-phase oxygen molecules by decomposition on the catalyst surface. Figure 1 shows the concept of OCM on perovskite oxide catalysts using N2O as oxidant.

Oxidative Coupling of Methane in Ba0.5Sr0.5Co0.8Fe0.2O3−δ Tubular Membrane Reactors

Study on Oxidative Coupling of Methane in Oxygen Permeable Tubular Membrane Reactor

Oxidative Coupling of Methane over SrO/La2O3 Catalyst in an Oxygen-Permeable Separation Membrane Reactor

Partial Oxidation of Methane to Syngas in BaCe 0.15 Fe 0.85 O 3−δ Membrane Reactors

Partial Oxidation of Methane to Syngas in Tubular Oxygenper-Meable Reactor

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor

Oxidative CO2 reforming of methane in La0.6Sr0.4Co0.8Ga0.2O3-δ (LSCG) hollow fiber membrane reactor

A Theoretical Analysis on Oxidative Coupling of Methane in Tubular Dense Membrane Reactor

Performance of U-shaped BaCo0.7Fe0.2Ta0.1O3−δ Hollow-Fiber Membranes Reactor with High Oxygen Permeation for Methane Conversion

Oxidative dehydrogenation of propane in a dense tubular membrane reactor

Partial Oxidation of Methane to Syngas in a Perovskite Hollow Fiber Membrane Reactor

Oxidative Coupling of Methane with High C2 Yield by Using Chlorinated Perovskite Ba0.5Sr0.5Fe0.2Co0.8O3−δ As Catalyst and N2O As Oxidant

The Characterization of BaF2/Y2O3Catalysts for the OCM Reaction

A Reaction-Separation Combined Ocm Process For High C-2 Hydrocarbon Yields

Stable oxygen permeable membrane with Ce0.9Gd0.1O2-δ protective layer for syngas production

Syngas Production in a Novel Perovskite Membrane Reactor with Co-Feed of CO2

Oxygen Permeation and Partial Oxidation of Methane Reaction in Ba0.9Co0.7Fe0.2Nb0.1O3−δ Oxygen Permeation Membrane

Oxygen Selective Ceramic Hollow Fiber Membranes for Partial Oxidation of Methane

Experimental and Modeling Studies on Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) Tubular Membranes for Air Separation

Oxygen Permeation Study in a Tubular Ba0.5Sr0.5Co0.8Fe0.2O3-δ Oxygen Permeable Membrane

Elucidating the effect of barium halide promoters on La2O3/CaO catalyst for oxidative coupling of methane