Abstract:Natural gas with methane as the main constituent is a natural resource that exceeds the reserves of oil in abundance. With inevitable depletion of crude oil, methane will become the major resource for chemicals and liquid fuels in future decades. Extensive efforts have been afforded to both direct and indirect conversion of methane. The direct-conversion approaches involve, for example, the selective oxidation of methane to methanol or formaldehyde, the oxidative coupling of methane (OCM) to C2 species (C2H6 and C2H4) and so on. Since the pioneering work of Keller and Bhasin, much research has been carried out into developing highly efficient catalysts for OCM. Unfortunately, the per pass C2 yields on nearly all reported catalysts are less than 30 %. OCM is believed to occur through a heterogeneous–homogeneous pathway. The mechanism proposes first the catalytic formation of methyl groups on catalyst surface, which desorb as free radicals (CH3·) into the gas phase and ultimately react by predominantly homogeneous pathways. 8] It is generally agreed that some oxygen species O* adsorbed on the catalyst surface are the active oxygen species for the activation of methane to form methyl radicals and play a key role in the selective generation of C2, whereas gaseous oxygen molecules mainly favor the formation of COx. [9–12] By assuming a reaction mechanism via methyl radicals formed by the reaction of methane with surface oxygen species, an upper limit of 28 % for the C2 yield is forecasted for a continuous, CH4/O2 co-fed, single pass process under conventional conditions, such as those used for laboratory screening. The inherent reason for such a limited C2 yield is that the gaseous oxygen—as required oxidant for OCM—can react with the more reactive C2 product to form COx and, thus, a higher C2 selectivity is always compromised with a lower CH4 conversion. [14] To attain a high C2 yield, it is necessary to reduce the nonselective gaseous oxygen concentration. Perovskite oxides with mixed conductivities have been attracting increasing attention due to their potential applications in air separation, as catalysts for selective oxidation, and as reactors for the partial oxidation of hydrocarbons or for other oxygen-involving reactions. Moreover, in the past decade, halide-modified oxides have been widely studied for oxidative dehydrogenation of ethane (ODE) to ethylene and were proven to offer a significant improvement in the performance of the selective oxidation. In this study, a novel chlorinedoped Ba0.5Sr0.5Fe0.2Co0.8O3 d (denoted as BSCFCls) was used as catalyst for the OCM in a fixed-bed reactor. Furthermore, N2O was chosen as the oxygen source because it is a relatively weak oxidant, which is suitable for selective oxidation. Herein, we want to show that (a) the introduction of Cl into Ba0.5Sr0.5Fe0.2Co0.8O3 d enhances the selectivity for the methyl radical formation and (b) N2O as oxidant can effectively reduce gaseous oxygen concentration, since it provides oxygen in the form of surface oxygen species rather than gas-phase oxygen molecules by decomposition on the catalyst surface. Figure 1 shows the concept of OCM on perovskite oxide catalysts using N2O as oxidant.

The Characterization of BaF2/Y2O3Catalysts for the OCM Reaction

The enhancement effects of BaX2 (X = F, Cl, Br) on SnO2-based catalysts for the oxidative coupling of methane (OCM)

Elucidating the effect of barium halide promoters on La2O3/CaO catalyst for oxidative coupling of methane

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

Oxidative Coupling of Methane with High C2 Yield by Using Chlorinated Perovskite Ba0.5Sr0.5Fe0.2Co0.8O3−δ As Catalyst and N2O As Oxidant

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

Active oxygen center in oxidative coupling of methane on La2O3 catalyst

Oxidative coupling of methane over Ce<sup>4+</sup>-doped Ba<sub>3</sub> WO<sub>6</sub> catalysts: investigation on oxygen species responsible for catalytic performance

Oxidative Coupling of Methane in Ba0.5Sr0.5Co0.8Fe0.2O3−δ Tubular Membrane Reactors

Oxidative Coupling of Methane over Alkali Metal Oxide Promoted La2O3/BaCO3 Catalysts

A homogeneous‐heterogeneous kinetic study of oxidative coupling of methane (OCM) on La2O3/CeO2 catalyst

Study on Oxidative Coupling of Methane in Oxygen Permeable Tubular Membrane Reactor

Oxidative coupling of methane over Ce 4+ -doped Ba 3 WO 6 catalysts: investigation on oxygen species responsible for catalytic performance

Strategies to Improve the Activity While Maintaining the Selectivity of Oxidative Coupling of Methane at La2O3: A Density Functional Theory Study

Preparation of La 2 Zr 2 O 7 composite oxides with fluorite/pyrochlore phases by excluding element influences for catalyzing oxidative coupling of methane

Improved Catalytic Activity and Stability of Ba Substituted SrTiO 3 Perovskite for Oxidative Coupling of Methane

Effect of different oxygen species on the oxidative coupling of methane over TiO 2 catalysts

Promotional Effect of CeO2 and Y2O3 on CuO/ZrO2 Catalysts for Methane Combustion

High-Pressure oxidative coupling of methane on alkali metal catalyst – Microkinetic analysis and operando thermal visualization

Roles of Oxygen Species in Low-Temperature Catalytic o-Xylene Oxidation on MOF-Derived Bouquetlike CeO2

Dissecting La2Ce2O7 catalyst to unravel the origin of the surface active sites devoting to its performance for oxidative coupling of methane (OCM)