Abstract:High-G accelerometers have a variety of applications with severe shock loadings especially in crash and impact environments. The package for a high-G accelerometer should provide both protection against such harsh environments and necessary communications with outside the package. The residual stress caused by packaging process which degrades the sensor performance should be considered at the beginning of packaging design. The accelerometer in this study is based on a piezoresistive structure fabricated by a standard MEMS fabrication process A glass cap was anodically bonded to the structure to protect the movable parts. Then a packaging substrate was fixed to above structures with an adhesive material. FEM simulation based on a simplified structure of the accelerometer has been applied in static analyses in order to find out the potential stress brought by the package. The affection of different adhesive and packaging materials on the acceletometer performance was simulated. The results of simulations show that both the Young's modulus of the adhesive and the coefficient of thermal expansion (CTE) of packaging substrate could have a significant impact on the initial output of the accelerometer. An experiment study on the affection was also conducted, and the results were similar to the results of FEM(finite element method) simulations for the simplified structure. Thus the FEM simulation of such simplified structure could serve as the basic of accelerometer packaging design. Based on former results, optimized process was suggested in the package of the accelerometer and the packaged accelerometer was tested with satisfactory results.

Study and characterization of plastic encapsulated package for a three-axis piezoresistive acceleromete with guard-ring structure

Finite Element Simulation on Packaging of Hinged High-G Micromachined Accelerometer

Study on the packaging technology for a high-G MEMS accelerometer

A Novel Stress Isolation Guard-Ring Design For The Improvement Of A Three-Axis Piezoresistive Accelerometer

A novel stress isolation guard ring design for the improvement of three-axis piezoresistive accelerometer

Method for Performance Improvement and Size Shrinkage of a Three-Axis Piezoresistive Accelerometer with Guard-Ring Structure

Investigation and experiment of high shock packaging technology for High-G MEMS accelerometer

Liquid Packaging Effects on Piezoresistive MEMS Accelerometer

Study of Multi-ranged Piezoresistive Micro Accelerometer Package Failure under High Overload

Design of a Piezoelectric Accelerometer with High Sensitivity and Low Transverse Effect

A high-g overload protected accelerometer with a novel microstructure

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

Design, Test and Evaluation of a Novel Die-Attach Structure for Packaging Stress Suppression of MEMS Resonant Accelerometers

Design And Simulation Of A Novel Piezoresistive Accelerometer For High Accuracy And Overload Ability

Low stress packaging of a micromachined accelerometer

Research on Special Piezoresistive Acceleration Sensor

A SOI Sandwich Differential Capacitance Accelerometer with Low-Stress Package

Study on Package Thermal Stress of Multi-ranged Micro-accelerometer

An improved structural design for accelerometers based on cantilever beam-mass structure

Research on a 3D Encapsulation Technique for Capacitive MEMS Sensors Based on Through Silicon Via

Design, Manufacture And Test Of Novel Mems Piezoresistive Accelerometer For High G Application