Abstract:This study investigates the effect of O2 plasma treatment on the physical and electrical properties of the surface region in Schottky-gate AlGaN/GaN high electron mobility transistor (HEMT). We demonstrate that O2 plasma treatment significantly reduces the gate leakage current and enhances the on/off ratio by three orders of magnitude compared to devices without treatment. The O2 plasma treatment removes organic chemical residue and forms Ga-O bonds on the AlGaN surface beneath the gate metal. X-ray photoelectron spectroscopy (XPS) results indicate that the treatment effectively forms a Ga-O compound oxide layer, which provides surface passivation. Furthermore, atomic force microscope (AFM) analysis reveals a 50% reduction in surface roughness after the O2 plasma treatment. Using O2 plasma oxidation treatment caused a shift in the threshold voltage (VTH) of Schottky-gate AlGaN/GaN HEMT. Initially measured at -5.26 V, the VTH value shifted to +0.5 V. Furthermore, we also employ TCAD simulation to assist in the process developed during the manufacturing process. It is worth noting that the drain current decreases as the Ga-O compound oxide layer increases. This is due to effectively depleted the polarization charges at the AlGaN/GaN interfaces during E-mode operation when reducing the thickness of the AlGaN layer beneath the gate metal. Our results demonstrate the importance of O2 plasma surface treatment in achieving optimal device performance. This study systematically discusses the effect of O2 plasma on AlGaN/GaN surface properties and the formation of Ga-O bonding. It offers insights into developing high-performance Schottky-gate AlGaN/GaN HEMT.

Reduction of Current Collapse in GaN High-Electron Mobility Transistors Using a Repeated Ozone Oxidation and Wet Surface Treatment

Pulsed N2 Plasma Surface Treatment for AlGaN/GaN HEMTs Prior to PECVD SiNx Passivation to Reduce Plasma Damage

Current Collapse Reduction in AlGaN/GaN HEMTs by High-Pressure Water Vapor Annealing

Effective Suppression of Current Collapse in AlGaN/GaN HEMT with N2O Plasma Treatment followed by High Temperature Annealing in N2 Ambience

Current collapse suppression in AlGaN/GaN HEMTs using dual-layer SiNx stressor passivation

Performance Improvement and Current Collapse Suppression of Al 2 O 3 /AlGaN/GaN HEMTs Achieved by Fluorinated Graphene Passivation

In Situ H-Radical Surface Treatment on Aluminum Gallium Nitride for High-Performance Aluminum Gallium Nitride/Gallium Nitride MIS-HEMTs Fabrication

AlGaN/GaN MIS-HEMTs of Very-Low ${v}_{\sf {{th}}}$ Hysteresis and Current Collapse with In-Situ Pre-Deposition Plasma Nitridation and LPCVD-Si3N4 Gate Insulator

Enhanced Device Performance Of Algan/Gan High Electron Mobility Transistors With Thermal Oxidation Treatment

Normally-off P-Gan/algan/gan High-Electron-mobility Transistors Using Oxygen Plasma Treatment

An insight to current collapse in GaN HEMT and suppressing techniques

Investigation of Surface- and Buffer-Induced Current Collapse in GaN High-Electron Mobility Transistors Using a Soft Switched Pulsed \(I-V\) Measurement

High V th and Improved Gate Reliability in P-GaN Gate HEMTs with Oxidation Interlayer

Study on a p-GaN HEMT with composite passivation and composite barrier layers

Investigating the effect of O2 plasma treatment on the operational characteristics of schottky-gate AlGaN/GaN HEMT

Impact of Moisture and Fluorocarbon Passivation on the Current Collapse of AlGaN/GaN HEMTs

Improved Vth Stability and Gate Reliability of GaN-Based MIS-HEMTs by Employing Alternating O2 Plasma Treatment

Improved Current Collapse in Recessed AlGaN/GaN MOS-HEMTs by Interface and Structure Engineering

Current-collapse Suppression and Leakage-Current Decrease in AlGaN/GaN HEMT by Sputter-Tan Gate-Dielectric Layer

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

Improved Performance of Fully-Recessed High-Threshold-Voltage GaN MIS-HEMT With in Situ H2/N2 Plasma Pretreatment