Abstract:III-nitrides based high electron-mobility transistors (HEMTs) are well-known excellent candidates for high-power, radio-frequency (rf) and high-temperature applications. However, HEMTs have to face the essential issues of high gate leakage current and drain current collapse (gate-lag), which inevitably limits the device performances and reliability. Here, we fabricate an optimized AlGaN/GaN metal-oxide-semiconductor high electron mobility transistor (MOS-HEMT), by using HfZrOx (HZO) as a gate dielectric, that can improve the interfacial and transport properties. Compared to the conventional high permittivity (high-kappa) gate dielectric HfO2 which has attracted wide attention in recent years, the concentrations of interface traps and the inside fixed oxide defects are obviously reduced by using high quality HZO layer. Through the dielectric engineering of HZO, the MOS-HEMT with HZO dielectric shows an enhanced DC output performance with an increase of 54% at the optimal working condition, which is indeed much higher than that of the HfO2 MOS-HEMT (40%). And the HZO MOS-HEMT exhibits a higher I-on/I-off ratio of 10(6), an excellent subthreshold swing (SS) of 85 mV/decade, and a higher voltage swing (GVS). The gate leakage is reduced by nearly 8 orders of magnitude compared to the conventional unpassivated HEMTs (conv. HEMT) at the gate voltage of -5 V. These results are mainly caused by the replacement of the low-height Schottky barrier (SB) and the reduction of interface traps density. In order to further investigate the interfacial and electric properties of HZO MOS-HEMT, the dynamic gate/drain voltage and high-frequency capacitance-voltage (C-V) measurements are both applied. Remarkably, no measurable current collapse and C-V hysteresis are clearly observed, showing the enhanced interfacial and electric performances of the MOS-HEMT with dielectric engineering of HZO.

Enhanced Device Performance Of Algan/Gan High Electron Mobility Transistors With Thermal Oxidation Treatment

Enhanced Device Performance of AlGaN/GaN HEMTs Using Thermal Oxidation of Electron-Beam Deposited Aluminum for Gate Oxide

AlGaN/GaN HEMTs with thermal oxidation treatment for microwave power applications

Suppressing Temperature Rise in AlGaN/GaN HEMT with Graphene Layers

A high breakdown voltage AlGaN/GaN MOSHEMT using thermal oxidized Al-Ti as the gate insulator

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

Algan/Gan Hemts with an Insulated Gate Fabricated by Inductively Coupled Plasma Oxidization

Investigating the effect of O2 plasma treatment on the operational characteristics of schottky-gate AlGaN/GaN HEMT

High V th and Improved Gate Reliability in P-GaN Gate HEMTs with Oxidation Interlayer

Improved Electrical Performance of InAlN/GaN High Electron Mobility Transistors with Forming Gas Annealing

Improved Vth Stability and Gate Reliability of GaN-Based MIS-HEMTs by Employing Alternating O2 Plasma Treatment

Enhanced Performances of AlGaN/GaN HEMTs with Dielectric Engineering of HfZrOx

90 nm gate length enhancement-mode AlGaN/GaN HEMTs with plasma oxidation technology for high-frequency application

Investigation of Oxidation Process in Self-Terminating Gate Recess Wet Etching Technique for Algan/Gan Normally-Off Mosfets

Investigation of Electrical Property and Thermal Stability in Enhancement-Mode InxAl1–xN/AlN/GaN MOS-HEMTs Fabricated by Using NiOx Gate and Fluorine Treatment

Improved Electrical Performance of InAlN/GaN High Electron Mobility Transistors with Post Bis(trifluoromethane) Sulfonamide Treatment

Reduction of Current Collapse in GaN High-Electron Mobility Transistors Using a Repeated Ozone Oxidation and Wet Surface Treatment

Simulation and analysis of high breakdown voltage AlGaN/GaN MOSHEMTs with TiO2/Al2O3 gate dielectric

0.2- AlGaN/GaN High Electron-Mobility Transistors With Atomic Layer Deposition Passivation

O2 Plasma Alternately Treated ALD-Al2O3 As Gate Dielectric for High Performance AlGaN/GaN MIS-HEMTs

Low Leakage Current and High-Cutoff Frequency AlGaN/GaN MOSHEMT Using Submicrometer-Footprint Thermal Oxidized TiO2/NiO As Gate Dielectric