Abstract:In this paper, a novel in-situ phosphorus doped three-layer SiGe strain relaxed buffer (SRB) is proposed in order to realize the integration of medium Ge mole fraction SiGe channel on the Si substate. Firstly, a three-layer SiGe SRB is epitaxially grown on a Si substrate, with the Ge mole fraction of each layer decreasing from 30 to 10% from top to bottom, and only top Si 0.7 Ge 0.3 SRB is in-situ doped with a phosphorus concentration of 5E17 cm −3 . After a chemical mechanical planarization (CMP) treatment is applied to the surface of top Si 0.7 Ge 0.3 SRB, a high quality and almost fully strained SiGe layer with a Ge mole fraction of 50% is prepared to realize the Si 0.5 Ge 0.5 /in-situ doped three-layer SiGe SRB stacked structure. Moreover, based on this stacked structure, a Si 0.5 Ge 0.5 channel p-FinFET with subthreshold swing of 94 mV/dec and driven current of 103 μA/μm is successfully prepared. Its Si 0.5 Ge 0.5 channel FinFET achieves better electrical performance after its in-situ P doping concentration of Si 0.7 Ge 0.3 SRB layer increases from 1 × 10 17 cm −3 to 5 × 10 17 cm −3 due to stronger inhibition of sub-fin parasitic channels and punch-through leakage. It proves that this newly developed in-situ phosphorus doped three-layer SiGe SRB would be a practical technique for the integration of medium Ge mole fraction SiGe channel FinFET.

Relaxed Ge0.97Sn0.03 P-channel tunneling FETs with high drive current fabricated on Si and further improvement enabled by uniaxial tensile strain

Relaxed Germanium-Tin P-Channel Tunneling Field-Effect Transistors Fabricated on Si: Impacts of Sn Composition and Uniaxial Tensile Strain

Strain Optimization in Silicon P-Type Double-Gate MOSFET at 7nm Channel Length

Deep Insight into Channel Engineering of Sub-3 Nm-Node P-Type Nanosheet Transistors with a Quantum Transport Model

Performance Comparison Between Si and Ge pDG-FETs for Different Channel Lengths Based on Hole Transport Simulation

Germanium-Tin P-channel tunneling field-effect transistors: Impacts of biaxial tensile strain and surface orientation

GeSn Quantum Well P-Channel Tunneling FETs Fabricated on Si(001) and (111) with Improved Subthreshold Swing

Performance Enhancement in Uniaxially Strained Germanium–Tin FinTFET: Fin Direction Dependence

High Mobility Strained-Ge Pmosfets with 0.7-Nm Ultrathin EOT Using Plasma Post Oxidation HfO2/Al2O3/GeOx Gate Stacks and Strain Modulation

Fabrication of strained Si0.55Ge0.45 channel PMOSFETs directly on a Si substrate

Strained Germanium Quantum Well PMOSFETs on SOI with Mobility Enhancement by External Uniaxial Stress

A Novel Strained Si Channel Heterojunction pMOSFET

Strain Release Enabled Bandgap Scaling in Ge Nanowire and Tunnel FET Application

Performance enhancement in uniaxially tensile stressed GeSn n-channel fin tunneling field-effect transistor: Impact of stress direction

Fabrication and Characterization of Strained Si Material Using SiGe Virtual Substrate for High Mobility Devices

Mobility Enhancement in Undoped Ge0.92Sn0.08quantum Well P-Channel Metal-Oxide-semiconductor Field-Effect Transistor Fabricated on (111)-Oriented Substrate

Intrinsic Reliability improvement in Biaxially Strained SiGe p-MOSFETs

Electron Mobility Enhancement Characteristics and Its Temperature Dependence in Strained-Si n-MOSFETs

High Performance Junctionless FDSOI SiGe Channel P-Finfet with High ION/IOFF Ratio and Excellent SS

A novel approach to Si0.5Ge0.5 channel FinFET fabrication: utilizing a three-layer SiGe strain relaxation buffer and In-Situ phosphorus doping

Mobility enhancement in undoped Ge {sub 0.92} Sn {sub 0.08} quantum well p channel metal oxide semiconductor field effect transistor fabricated on (111) oriented substrate