Abstract:An electro‐thermally actuated nanomechanical non‐volatile switch (ETAN‐NVS) with an out‐of‐plane electrode configuration is proposed. The fabricated ETAN‐NVS exhibits outstanding performance, including CMOS‐level voltage ( 108), and exceptional reliability (>1300 cycles). These characteristics meet stringent requirements for use in hybrid CMOS‐NEM circuit applications. The rapid growth of data‐intensive applications has significantly heightened the concerns about power consumption in current computing systems. From this perspective, there have been substantial efforts to implement ultra‐low power systems by integrating nanoelectromechanical non‐volatile switches (NEM‐NVS) with near‐zero leakage current into standard complementary metal‐oxide‐semiconductor (CMOS) circuits. To practically harness the potential of the NEM‐NVS, it is imperative to achieve high performance, such as low voltage, high on/off ratio, and high reliability, while simultaneously ensuring wafer‐scale CMOS compatibility. However, achieving these requirements is still challenging, primarily due to their electrostatic operation, in‐plane electrode configuration, and conventional fabrication methods. Here, an electro‐thermally actuated nanomechanical non‐volatile switch (ETAN‐NVS) with an out‐of‐plane electrode configuration along with an 8‐inch wafer‐scale CMOS‐compatible fabrication method is reported. By introducing the electrothermal mechanism into a vertically actuated buckling nanostructure, the fabricated ETAN‐NVS attains CMOS‐level voltage ( 108), and exceptional reliability (>1300 cycles). Moreover, a successful wafer‐scale demonstration of the ETAN‐NVS using only a CMOS‐compatible process paves the way for 3D integration with CMOS logic.

Robust Silicon Carbide (sic) Nanoelectromechanical Switches with Long Cycles in Ambient and High Temperature Conditions

Nanoelectromechanical Switches with Vertically Aligned Carbon Nanotubes

Electrostatically actuated silicon-based nanomechanical switch at room temperature

Carbon-Carbon Contacts for Robust Nanoelectromechanical Switches

Nanoelectromechanical Switch with Low Voltage Drive

Fabrication of A Nanoelectromechanical Switch Using A Suspended Carbon Nanotube

Reliability Issues of SiC MOSFETs: A Technology for High-Temperature Environments

full papers 2910 Resistive switching Resistive Switching in Nanogap Systems on SiO 2 Substrates

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

A Highly Reliable Lateral MEMS Switch Utilizing Undoped Polysilicon As Isolation Material

Laterally Actuated Si-to-Si DC MEMS Switch for Power Switching Applications

Resistive switching in nanogap systems on SiO2 substrates

Influence of Pinch Effect on the Lifetime of a 2MW Silicon Carbide Photoconductive Semiconductor Switch

Advances in SiC materials and devices: an industrial point of view

Silicon carbide MEMS for harsh environments

Resistive Switches and Memories from Silicon Oxide.

Wafer‐Scale CMOS‐Compatible Electro‐Thermally Actuated Nanomechanical Non‐Volatile Switch with Out‐of‐Plane Electrode Configuration

Development of a 1200 V, 120 A SiC MOSFET module for high-temperature and high-frequency applications

Evaluation of Advanced Si and SiC Switching Components for Army Pulsed Power Applications

Oxide Reliability of SiC MOS Devices

Sub-0.3 volt amorphous metal WNx based NEMS switch with 8 trillion cycles