Abstract:Abstract This paper presents design, fabrication and characterization details of a 10kV power module package for >200°C ambient temperature applications. Electrical simulations were performed to confirm the module design, and that the electric field distribution throughout the module did not exceed dielectric capabilities of components and materials. A suitable copper etching process was demonstrated for DBC layout, and a high melting point Sn/Pb/Ag solder reflow process was developed for device and component attachment. To monitor the operational temperature of the module, a thermistor was integrated onto the substrate. A new silicone gel, having a working temperature up to 210°C, was evaluated and selected for encapsulation and, of great importance, for passivation of high voltage (10kV) SiC dies. An additive manufacturing ‘Design Process’ was developed and applied to printing the housings, molds, and test fixtures. Also, cleaning processes were evaluated for every step in the fabrication process. To verify performance of the modules, mechanical dies were mounted on the substrates, and a high temperature testing setup built to characterize the modules at high temperature. Measurements indicated that the module can operate up to 12kV within 25°C to 225°C, with less than 0.1 μA leakage current. The packaging was used for full-power characterization of developmental 10kV SiC diodes, and proved that the power module packaging satisfied all requirements for high voltage and high temperature applications. This work successfully validated the processes for creating high voltage (>10 kV) and high temperature (>200°C) power modules.

Development of a 1200 V, 120 A SiC MOSFET module for high-temperature and high-frequency applications

A 1200-V, 60-A SiC MOSFET Multichip Phase-Leg Module for High-Temperature, High-Frequency Applications

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

Design and Application of A 1200v Ultra-Fast Integrated Silicon Carbide Mosfet Module

High-Temperature Characterizations of a Half-Bridge Wire-Bondless SiC MOSFET Module

Performance of a 1.2kV, 288A full-SiC MOSFET module based on low inductance packaging layout

Compact-Interleaved Packaging Method of Power Module With Dynamic Characterization of 4H-SiC MOSFET and Development of Power Electronic Converter at Extremely High Junction Temperature

A Double-Sided Cooling 6.5kv SiC MOSFET Power Module with Insulation Enhancement Design

A Highly Integrated Multichip SiC MOSFET Power Module With Optimized Electrical and Thermal Performances

3.38 Mhz Operation of 1.2kv SiC MOSFET with Integrated Ultra-Fast Gate Drive

10-kV SiC MOSFET Power Module With Reduced Common-Mode Noise and Electric Field

High power SiC inverter module packaging solutions for junction temperature over 220°C

A Novel SiC MOSFET Module for High-power Soft-switching Converter

A High Performance Power Module with >10kV capability to Characterize and Test In Situ SiC Devices at >200°C Ambient

A Novel Double-sided Cooling 3L-ANPC SiC MOSFET Power Module with Interleaved Layout

Recent advances in silicon carbide MOSFET power devices

A SiC Double-Sided Stacked Wire-Bondless Power Module for High-Frequency Power Electronic Applications

High-temperature Characteristics of SiC Module and 100 Kw SiC AC-DC Converter at a Junction Temperature of 180 °C

A 10kV/200A SiC MOSFET module with series-parallel hybrid connection of 1200V/50A dies