Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Multilayer-Based Forming-Free RRAM Devices With Excellent Uniformity

Forming-Free HfOx-Based Resistive Memory with Improved Uniformity Achieved by the Thermal Annealing-Induced Self-Doping of Ge

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Oxide-Based Rram: Uniformity Improvement Using A New Material-Oriented Methodology

Low Power and High Uniformity of HfOx-based RRAM Via Tip-Enhanced Electric Fields

Chemical Insight into Origin of Forming-Free Resistive Random-Access Memory Devices

Enhancing the Uniformity of a Memristor Using a Bilayer Dielectric Structure

Understanding the Switching Oxide Defect Formation and Recovery on HfOx Based RRAM Device

Multilevel resistive switching in HfOx/TiOx/HfOx/TiOx multilayer-based RRAM with high reliability

A Self-Rectifying and Forming-Free HfOx Based-High Performance Unipolar RRAM

Uniform 3d Vertical Alo Delta/Ta2o5-X/Taoy Rram: Fabrication, Characterization And Mechanism Analysis

Self-compliance Multilevel Resistive Switching Characteristics in TiN/HfOx/Al/Pt RRAM Devices

Inorganic-Organic Hybrid Resistive Switching Memory with High Uniformity and Multilevel Operation

Uniformity Improvement of Al-doped HfO2 Resistive Switching Memory Devices Using a Novel Diffusion Approach

A Forming-Free Bipolar Resistive Switching in HfOx-Based Memory with a Thin Ti Cap

Forming-Free HfO x -Based Resistive Memory With Improved Uniformity Achieved by the Thermal Annealing-Induced Self-Doping of Ge

Improvement of HfOx-Based RRAM Device Variation by Inserting ALD TiN Buffer Layer

A Novel Programming Method for Multilevel RRAM Based on Pulse Width Modulation

Nitrogen-Oxyanion-Doped HfO2 Resistive Random-Access Memory with Chemically Enhanced Forming

Unipolar Resistive Switching with Forming-Free and Self-Rectifying Effects in Cu/HfO2/n-Si Devices

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering