Abstract:Current mismatch due to solar cell failure or partial shading of solar panels may cause a reverse biasing of solar cells inside a photovoltaic (PV) module. The reverse-biased cells consume power instead of generating it, resulting in hot spots. To protect the solar cell against the reverse current, we introduce a novel design of a self-protected thin-film crystalline silicon (c-Si) solar cell using TCAD simulation. The proposed device achieves two distinct functions where it acts as a regular solar cell at forward bias while it performs as a backward diode upon reverse biasing. The ON-state voltage (VON) of the backward equivalent diode is found to be 0.062 V, which is lower than the value for the Schottky diode usually used as a protective element in a string of solar cells. Furthermore, enhancement techniques to improve the electrical and optical characteristics of the self-protected device are investigated. The proposed solar cell is enhanced by optimizing different design parameters, such as the doping concentration and the layers' thicknesses. The enhanced cell structure shows an improvement in the short-circuit current density (JSC) and the open-circuit voltage (VOC), and thus an increased power conversion efficiency (PCE) while the VON is increased due to an increase of the JSC. Moreover, the simulation results depict that, by the introduction of an antireflection coating (ARC) layer, the external quantum efficiency (EQE) is enhanced and the PCE is boosted to 22.43%. Although the inclusion of ARC results in increasing VON, it is still lower than the value of VON for the Schottky diode encountered in current protection technology.

Investigation of reverse current for crystalline silicon solar cells—New concept for a test standard about the reverse current

Investigation Of The Relationship Between Reverse Current Of Crystalline Silicon Solar Cells And Conduction Of Bypass Diode

Investigation of Reverse Current for Crystalline Silicon Solar Cells

Comparative Study on Reverse Current for PID-Affected and PID-Free Crystalline Silicon Solar Module

Hotspots and Performance Evaluation of Crystalline-Silicon and Thin-Film Photovoltaic Modules

Design and Optimization of a Self-Protected Thin Film c-Si Solar Cell against Reverse Bias

Investigation of Fine Model for Crystalline Silicon Solar Cells under Non-standard Test Conditions

The Analysis on Simulation and Invalidation of Hot-Spot Temperature Distribution in Micro-Defective Crystalline Silicon Solar Cells

Macroscopic Study on Current Transport Path in Front‐Side Contacts of Crystalline Silicon Solar Cells

Analysis of leakage current in GaAs micro-solar cell arrays

Photocurrent effect in reverse-biased p-n silicon waveguides in communication bands

Analysis Of Junction Recombination Of P-Type Single Crystalline Silicon Solar Modules Affected By Potential Induced Degradation Under Non-Stc

Analysis of the Electrochemical Reactions and Ions Migration for Crystalline Silicon Solar Module under High System Voltage

Influence of Temperature and Reverse Bias on Photocurrent Spectrum and Supra-Bandgap Spectral Response of Monolithic GaInP/GaAs Double-Junction Solar Cell

Study on the Thermal Stress Distribution of Crystalline Silicon Solar Cells in BIPV

Investigation of soldering for crystalline silicon solar cells

Study on Random Failure of Crystalline Silicon Solar Modules in the Field

Recombination Parameters of the Diffusion Region and Depletion Region for Crystalline Silicon Solar Cells under Different Injection Levels

The Effect and Mechanism of Current Injection to Suppress Light and Elevated Temperature Induced Degradation in P-Type Cast-Mono and Multicrystalline Silicon Passivated Emitter and Rear Cells

Shunts in crystalline silicon PV modules: A comprehensive review of investigation, characterization, and mitigation

Passivating Contacts for Crystalline Silicon Solar Cells: An Overview of the Current Advances and Future Perspectives