Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Assessment of Available Methods for Estimating Rotor Temperatures of Induction Motor

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

An Approach to Estimate the Temperature of an Induction Motor under Nonlinear Parameter Perturbations Using a Data-Driven Digital Twin Technique

A Transfer Function-Based Thermal Model Reduction Study for Induction Machine Thermal Overload Protective Relays

An Active Stator Temperature Estimation Technique for Thermal Protection of Inverter-Fed Induction Motors with Considerations of Impaired Cooling Detection

A Nonintrusive Thermal Monitoring Method for Induction Motors Fed by Closed-Loop Inverter Drives

Adaptive Rotor Flux Estimation and Parameter Identification for Induction Motor

A Remote and Sensorless Thermal Protection Scheme for Soft-Starter-Connected Induction Motors

A Novel Cooling Condition Monitoring Method for Induction Motors Based on Particle Swarm Optimization

A Remote and Sensorless Stator Winding Resistance Estimation Method for Thermal Protection of Soft-Starter-Connected Induction Machines

A general approach to sensorless estimation rotor and stator windings temperature in induction motor drives

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

Impaired-Cooling-Condition Detection Using DC-Signal Injection for Soft-Starter-Connected Induction Motors

A nonintrusive thermal monitoring method for closed-loop drive-fed induction machines

Parameter Identification Of Inverter-Fed Induction Motors: A Review

Optimization of Motor Heat Dissipation Systems Based on Three Dimensional Flow Field Analysis

Algorithm for recalculation of temperature of asynchronous motor based on equivalent thermal circuit

Improving Thermal Recovery Time for Soft-Starter-Connected AC Motors with Intermittent Periodic Duty Cycles

A DC Signal Injection-Based Thermal Protection Scheme for Soft-Starter-Connected Induction Motors

Heat transfer study on a stator-permanent magnet electric motor: A hybrid estimation model for real-time temperature monitoring and predictive maintenance

A Survey of Condition Monitoring and Protection Methods for Medium Voltage Induction Motors