Abstract:In the absence of flux measurements, techniques of field orientations depend on motor parameters, particularly on rotor resistances. During operation in flux-oriented mode, online continuous estimation of harmonic and fundamental rotor resistances is important for multiphase IM. To limit the core saturation and to achieve the synchronous and aligned air-gap flux density distribution, the harmonic plane is based on magnetizing flux-oriented control (MFOC) whereas the fundamental plane is taken as rotor flux-oriented control (RFOC). Mismatch harmonic and fundamental resistances trigger deviations in the rotor and magnetizing flux and also cause misalignment in the resultant induced electromotive force (EMF) waveform which could, in turn, be the reason for over-excitation and under-excitation. This article formulates the simultaneous online identification of rotor resistances for particularly MFOC harmonic plane while the fundamental plane is RFOC based on the dot product of rotor flux and stator current for making a model reference adaptive system (MRAS). Mismatched stator resistance and dead time of inverter have a negligible effect on the reference model during steady state. Convergence and steady-state performance can be acquired for a variation of load conditions particularly at heavy loading. The validation of the proposed approach is verified through simulation and experiment results by incorporating a multiphase platform consisting of a seven-phase induction machine.

Adaptive Rotor Flux Estimation and Parameter Identification for Induction Motor

Adaptive Flux Estimation and Parameters Identification of Induction Motors Based on Model Reference Approach

Multiplane Rotor Resistance Online Estimation Strategy for Multiphase Induction Machine under Nonsinusoidal Power Supply

Rotor Time Constant Estimation for the Vector Controlled Induction Motor Drive Based on MARS Scheme

Online Parameter Identification for Surface-mounted Magnet Synchronous Motors Based on Adaptive RBF Neural Network

Flux Adaptive Control for PMSM

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

Parameter Observability Analysis of Interior Permanent Magnet Synchronous Motor and Online Parameter Identification Based on Adaptive Extended Kalman Filter

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Improved MRAS Parameter Identification Method for PMSM Based on Permanent Magnet Flux Linkage Free Model

Non-parametric induction motor rotor flux estimator based on feed-forward neural network

IMPROVED U-I MODEL ROTOR FLUX ESTIMATOR FOR INDUCTION MOTOR

Parameter Identification Of Inverter-Fed Induction Motors: A Review

On-Line Identification of Moment of Inertia for Permanent Magnet Synchronous Motor Based on Model Reference Adaptive System

An Improved Rotor Flux Estimation Model Based on Stator Voltages and Currents

Second-Order Sliding-Mode Observer With Online Parameter Identification for Sensorless Induction Motor Drives

Totally Adaptive Observer For Speed Sensorless Induction Motor Drives: Simply A Cost Of Extra Energy Consumption

Online Identification of Permanent Magnet Flux Based on Extended Kalman Filter for IPMSM Drive With Position Sensorless Control

Online Decoupled Stator and Rotor Resistances Adaptation for Speed Sensorless Induction Motor Drives by a Time-Division Approach

ROTOR FLUX ESTIMATOR OF INDUCTION MOTOR BASED ON STATOR CURRENT VECTOR ORIENTATION

Resistances and Speed Estimation in Sensorless Induction Motor Drives Using a Model With Known Regressors.