Abstract:BackgroundAn induction motor is at the heart of every rotating machine and hence it is a very vital component. Almost in every industry, around 90% of the machines apply an induction motor as a prime mover. It is a very important driving unit of the machine. Hence, it is necessary to monitor its condition to avoid any catastrophic failure and stoppage of production. The breakdown of the induction motor would not be affordable due to remarkable financial loss, unpredicted shutdown, and the associated repair cost.PurposeVibration is a manifestation of induction motor due to the issues in alignment, balancing, and clearances. Bearing, the most vulnerable to failure due to continuous working under fatigue loading leads to defects. These defects cause changes in the vibration signature over time. The vibration monitoring techniques helps to effectively diagnose mechanical faults such as bearing defect and stator rotor rub. The purpose of this review paper is to summarize the major faults in induction motor, recent diagnostics methods augmented with advanced signal processing techniques, and real-life applications in electric vehicles. It also discusses possible research gaps and opportunities to contribute based on the review findings in the field of condition monitoring.MethodsThis article presents a detailed review of recent trends in the research of condition monitoring and fault diagnosis of the induction motor. The emphasis is given on the major faults in the induction motor covering time-domain, frequency-domain, and time–frequency domain methods along with an application of artificial intelligence techniques for fault detection.Review FactorThis article presents a comprehensive review of literature which highlights the development and new propositions by researchers in the field of diagnostic techniques for the different faults of induction motor in the last decade. Researchers documented applications of the different conventional methods, advanced signal processing techniques, and soft computing techniques for fault identification of induction motor. This review is carried out for fault identification of induction motor used in machines in general and in particular for identifying the faults in an induction motor of an electric vehicle. A dedicated discussion on the review findings, research gaps, future trends in the field of condition monitoring of induction motor is presented. Condition monitoring of the induction motor in an electric vehicle is also discussed in this paper.ConclusionsIt is observed that the vibration-based techniques are reported to be effective for the identification of mechanical faults while motor current signature analysis is effective for electrical fault in an induction motor. The review presented to analyze the suitability of various condition monitoring techniques for the induction motor fault identification in general and particularly its application in an electric vehicle. It is observed that the diagnosis of faults at the incipient level without using the signal processing technique is challenging. Fault diagnosis of induction motor has witnessed the changes from traditional diagnosis techniques to advanced techniques with a hybrid application of signal processing and artificial intelligence techniques. Still, there is a potential of improvement in reliability, efficiency, robustness, computational time, and real-time diagnostics of faults in IM.

A Survey of Condition Monitoring and Protection Methods for Medium Voltage Induction Motors

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

An Integrated Condition Monitoring Method for Insulation Health of Multiple Motor System

Induction Motor Condition Monitoring for Sustainable Manufacturing

Automated Monitoring of the Uniform Demagnetization Faults in Permanent-Magnet Synchronous Motors: Practical Methods and Challenges

Real‐time condition monitoring on VSD‐fed induction motors through statistical analysis and synchronous speed observation

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

Condition Monitoring of Industrial Electric Machines: State of the Art and Future Challenges

Condition Monitoring and Fault Diagnosis of Induction Motor

Comparative Study of Neutral-Voltage-Based and Leakage-Current-Based Online Condition Monitoring Methods for Stator Insulation of Inverter-Fed Machines

Intelligent Condition Monitoring Of Rotating Machinery Through Electrostatic Sensing And Signal Analysis

Assessment of Available Methods for Estimating Rotor Temperatures of Induction Motor

No-Load Losses Based Method to Detect Demagnetisation Fault in Permanent Magnet Synchronous Motors with Parallel Branches

Comprehensive Survey on Fault Detection and Classification in Three-Phase Induction Motors

Stator Inter-Turn Fault Diagnosis by Motor Current Signature Approach

State-of-the-Art Techniques for Fault Diagnosis in Electrical Machines: Advancements and Future Directions

Quasi-Online Technique for Health Monitoring of Stator Winding Insulation in Inverter-Fed Motor Using Switching Transient Voltage Response

Sensorless speed estimation of mains-fed induction motors for condition monitoring using motor relays

Online detection of endwinding contamination in industrial motors

Study of On-Line Fault Detection and Diagnostics of Three Phase Induction Motors

IoT-based health monitoring and fault detection of industrial AC induction motor for efficient predictive maintenance