Abstract:Demagnetization fault in a permanent magnet synchronous motor (PMSM) degrades its performance and may cause serious catastrophes. Fault localization technique can improve the reliability and safety of PMSM and provide important information for developing operation and maintenance strategies. Thus, a fault localization method is so important. Mainstream is a common method that uses search coil installed on every stator tooth to diagnose fault location. Due to the use of a large number of search coils, the method is limited in terms of invasiveness, implementation cost, and installation. Moreover, the method can only diagnose the fault location in PMSM with one demagnetized permanent magnet (PM). This article proposes a novel method which can detect the specific location of demagnetized PMs in PMSM with any types of demagnetization faults. The method only needs three additional toroidal yoke coils wound around the stator yoke. Toroidal yoke coils are used to measure the back electromotive force (EMF). The demagnetization fault localization signals (DFLSs) are produced by basic calculation of the output signals of three search coils. The DFLSs are partitioned according to the electrical period. The location of demagnetization fault can be diagnosed through analyzing each electric period waveform of DFLSs. First, the arrangement of toroidal-yoke-type search coil and the construction method of DFLSs are introduced. Second, a partitioned analytical model of DFLSs is developed. Third, waveforms in one electric period of DFLSs under preset fault types are investigated. Finally, the method for diagnosing demagnetization fault in PMSM is proposed. The simulation and experimental results justify the precision of the proposed search coil which shows the maximum error of back EMF to be 4.1%. It also shows the ability of the method to locate demagnetized PMs when the demagnetization severity (the ratio of the change in coercive force of PM to the normal coercive force) is 10%. This study provides a new method for diagnosing demagnetization fault, as well as provides a significant reference for fault post-processing and fault-tolerant control of PMSM.

No-Load Losses Based Method to Detect Demagnetisation Fault in Permanent Magnet Synchronous Motors with Parallel Branches

A Novel Magnetization Failure Detection Method for 1-Phase BLDC Motor Based on Back-EMF Test

A Sinusoidal Current Control Method for SPMSM Considering Uneven Demagnetization Fault

RLS-Based Algorithm for Detecting Partial Demagnetization under Both Stationary and Nonstationary Conditions

Non-Uniform Demagnetization Detection Considering Load Unbalance for SPMSMs Based on Motor Current Derivative Analysis

Demagnetization Fault Detection and Location in PMSM Based on Correlation Coefficient of Branch Current Signals

Diagnosis of High-Resistance Connection Faults in PMSMs Based on GMR and Deep Learning

A Novel Method for Diagnosing Demagnetization Fault in PMSM Using Toroidal-Yoke-Type Search Coil

Diagnosis of Air‐gap Eccentricity and Partial Demagnetisation of an Interior Permanent Magnet Synchronous Motor Based on Inverse Transient Complex Inductance Vector Theory

Uneven Demagnetization Fault Diagnosis in Dual Three-Phase Permanent Magnet Machines Based on Electrical Signal Difference

Automated Monitoring of the Uniform Demagnetization Faults in Permanent-Magnet Synchronous Motors: Practical Methods and Challenges

Nonlinear Analytical Modelling for Surface-Mounted Permanent Magnet Motors with Magnet Defect Fault

Online Demagnetization Fault Recognition for Permanent Magnet Motors Based on the Hall-Effect Analog Sampling

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Analysis of Inter-Turn Short-Circuit Faults in Brushless DC Motors Based on Magnetic Leakage Flux and Back Propagation Neural Network

Demagnetization Fault Diagnosis of Permanent Magnet Synchronous Motors Using Magnetic Leakage Signals

Online Detecting Magnet Defect Fault in PMSG With Magnetic Sensing

Influence of Load Characteristics on Three-Phase Short Circuit and Demagnetization of Surface-Mounted PM Synchronous Motor

Research and Application of Intelligent Diagnosis Technology in Permanent Magnet Generator for Stress Demagnetization Fault

An Online Monitoring Technique for Partial Demagnetization Monitoring of Permanent Magnet Machines Based on Intermittent Short-circuit

Online Identification of Inductance and Flux Linkage for SPMSMs Decoupled from Resistance Voltage Drop and VSI Nonlinearity