Abstract:In the absence of flux measurements, techniques of field orientations depend on motor parameters, particularly on rotor resistances. During operation in flux-oriented mode, online continuous estimation of harmonic and fundamental rotor resistances is important for multiphase IM. To limit the core saturation and to achieve the synchronous and aligned air-gap flux density distribution, the harmonic plane is based on magnetizing flux-oriented control (MFOC) whereas the fundamental plane is taken as rotor flux-oriented control (RFOC). Mismatch harmonic and fundamental resistances trigger deviations in the rotor and magnetizing flux and also cause misalignment in the resultant induced electromotive force (EMF) waveform which could, in turn, be the reason for over-excitation and under-excitation. This article formulates the simultaneous online identification of rotor resistances for particularly MFOC harmonic plane while the fundamental plane is RFOC based on the dot product of rotor flux and stator current for making a model reference adaptive system (MRAS). Mismatched stator resistance and dead time of inverter have a negligible effect on the reference model during steady state. Convergence and steady-state performance can be acquired for a variation of load conditions particularly at heavy loading. The validation of the proposed approach is verified through simulation and experiment results by incorporating a multiphase platform consisting of a seven-phase induction machine.

A general approach to sensorless estimation rotor and stator windings temperature in induction motor drives

Sensorless Control Strategy for Multiphase Induction Motor with Stator and Rotor Resistance Identification Based on Injecting Third Harmonic Current

An Approach to Estimate the Temperature of an Induction Motor under Nonlinear Parameter Perturbations Using a Data-Driven Digital Twin Technique

A Nonintrusive Thermal Monitoring Method for Induction Motors Fed by Closed-Loop Inverter Drives

Heat transfer study on a stator-permanent magnet electric motor: A hybrid estimation model for real-time temperature monitoring and predictive maintenance

An Active Stator Temperature Estimation Technique for Thermal Protection of Inverter-Fed Induction Motors with Considerations of Impaired Cooling Detection

A nonintrusive thermal monitoring method for closed-loop drive-fed induction machines

Rotor Thermal Monitoring Scheme for Direct-Torque-Controlled Interior Permanent Magnet Synchronous Machines via High-Frequency Rotating Flux or Torque Injection

Online Decoupled Stator and Rotor Resistances Adaptation for Speed Sensorless Induction Motor Drives by a Time-Division Approach

A NEW METHOD FOR STATOR TEMPERATURE MONITORING FOR INDUCTION MOTOR

Rotor Flux Position Correction and Parameters Estimation on Sensorless Multiple Induction Motors Drives

An EMF Observer for PMSM Sensorless Drives Adaptive to Stator Resistance and Rotor Flux Linkage

A Remote and Sensorless Thermal Protection Scheme for Soft-Starter-Connected Induction Motors

Rotor Temperature Estimation Strategy for Induction Motors Based on Thermal Conductance Correction

Sensorless Control for Five-phase Induction Motors With Improved Third-harmonic Current Injection

Stable Simultaneous Stator and Rotor Resistances Identification for Speed Sensorless IM Drives: Review and New Results

Practical implementation of a remote and sensorless stator resistance-based thermal protection method

An Online Rotor Flux Estimation Technique Based on Intermittent Stator De-Energization for Rotor Temperature Estimation of Permanent Magnet Machines

A Remote and Sensorless Stator Winding Resistance Estimation Method for Thermal Protection of Soft-Starter-Connected Induction Machines

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Handling Stray Flux Signals for Stator Turn Insulation Degradation Monitoring