Abstract:The thermal characteristics of de-energized AC motors are largely different from those of operating AC motors. The conventional thermal protection techniques are not capable of providing reliable thermal protection for AC motors operated with intermittent periodic duty cycles. This paper proposes a non-intrusive stator winding resistance and temperature estimation technique for soft-starter-connected AC motors with intermittent periodic duty cycles. By changing the operation of the solid-state power switches in the soft-starter, a DC signal can be intermittently injected into the AC motor when de-energized, with no output torque induced. The stator winding resistance and temperature can therefore be monitored based on the DC model of ac motors, when the motors are de-energized. Based on the monitoring of the stator winding temperature, the required thermal recovery time can be accurately estimated, which can greatly reduce the required time of each operating cycle and improve the efficiency of the industrial process. The proposed technique is validated through experimental testing on a 7.5-hp induction motor. The error in the stator temperature estimation can be within 5degC. Using the proposed stator temperature estimation technique, for ac motors operated under intermittent periodic duty cycles, the thermal recovery time can be reduced by 45% with the overall efficiency of the motor system increased by 70%, compared to the stator temperature estimation techniques used in conventional thermal relays. The importance of the proposed technique lies in its non-intrusive nature: only voltage and current measurements are needed; the motor's operating condition is not interrupted.

A nonintrusive thermal monitoring method for closed-loop drive-fed induction machines

A Nonintrusive Thermal Monitoring Method for Induction Motors Fed by Closed-Loop Inverter Drives

Rotor Thermal Monitoring Scheme for Direct-Torque-Controlled Interior Permanent Magnet Synchronous Machines via High-Frequency Rotating Flux or Torque Injection

Sensorless Control Strategy for Multiphase Induction Motor with Stator and Rotor Resistance Identification Based on Injecting Third Harmonic Current

An Active Stator Temperature Estimation Technique for Thermal Protection of Inverter-Fed Induction Motors with Considerations of Impaired Cooling Detection

A general approach to sensorless estimation rotor and stator windings temperature in induction motor drives

An Approach to Estimate the Temperature of an Induction Motor under Nonlinear Parameter Perturbations Using a Data-Driven Digital Twin Technique

A Remote and Sensorless Thermal Protection Scheme for Soft-Starter-Connected Induction Motors

Magnetic Effects of DC Signal Injection on Induction Motors for Thermal Evaluation of Stator Windings.

Impaired-Cooling-Condition Detection Using DC-Signal Injection for Soft-Starter-Connected Induction Motors

A NEW METHOD FOR STATOR TEMPERATURE MONITORING FOR INDUCTION MOTOR

A DC Signal Injection-Based Thermal Protection Scheme for Soft-Starter-Connected Induction Motors

A Transfer Function-Based Thermal Model Reduction Study for Induction Machine Thermal Overload Protective Relays

An Impedance Identification Approach to Sensitive Detection and Location of Stator Turn-To-Turn Faults in A Closed-Loop Multiple-Motor Drive

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Open-Loop Validation of a decoupled model of an Induction Motor Supplied by a PWM Inverter

Sensorless Control for Five-phase Induction Motors With Improved Third-harmonic Current Injection

Research of Sensorless Control for Multiphase Induction Motor Based on High Frequency Injection Signal Technique

A Non-Intrusive Winding Heating Method for Induction Motor Using Soft-Starter for Preventing Moisture Condensation

Improving Thermal Recovery Time for Soft-Starter-Connected AC Motors with Intermittent Periodic Duty Cycles

Assessment of Available Methods for Estimating Rotor Temperatures of Induction Motor