Abstract:The higher voltage blocking capability and faster switching speed of silicon-carbide (SiC) mosfets have the potential to replace Si insulated gate bipolar transistors (IGBTs) in medium-low-voltage and high-power applications. In this paper, a state-of-the-art commercially available 325 A, 1700 V SiC mosfet module has been fully characterized under various load currents, bus voltages, and gate resistors to reveal their switching capability. Meanwhile, Si IGBT modules with similar power ratings are also tested under the same conditions. From the test results, several interesting points have been obtained: different to the Si IGBT module, the over-shoot current of the SiC mosfet module increases linearly with the increase of the load current and it has been explained by a model of the over-shoot current proposed in this paper; the induced negative gate voltage due to the complementary device turn-off (crosstalk effect) is more harmful to the SiC mosfet module than the induced positive gate voltage during turn-on when the gate off-voltage is 6 V; the maximum dvdt and didt (electromagnetic interference) during switching transients of the SiC mosfet module are close to those of the Si IGBT module when the gate resistance is larger than 8 but the switching loss of the SiC mosfet module is much smaller; the switching losses of the Si IGBT module are greater than those of the SiC mosfet module even when the gate resistance of the former is reduced to zero. An accurate power loss model, which is suitable for a three-phase two-level converter based on SiC mosfet modules considering the power loss of the parasitic capacitance, has been presented and verified in this paper. From the model, a 96.2 efficiency can be achieved at the switching frequency of 80kHz and the power of 100 kW.

Characterization of a High Temperature Multichip SiC JFET-based Module

A 1200-V, 60-A SiC MOSFET Multichip Phase-Leg Module for High-Temperature, High-Frequency Applications

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

High Temperature Direct Double Side Cooled Inverter Module for Hybrid Electric Vehicle Application

High-temperature Characteristics of SiC Module and 100 Kw SiC AC-DC Converter at a Junction Temperature of 180 °C

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

Development of a 1200 V, 120 A SiC MOSFET module for high-temperature and high-frequency applications

Fabrication and testing of 3500V/15A SiC JFET based power module for high-voltage, high-frequency applications

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Design and Application of High-Voltage SiC JFET and Its Power Modules

High power SiC inverter module packaging solutions for junction temperature over 220°C

High-Temperature Characterizations of a Half-Bridge Wire-Bondless SiC MOSFET Module

Compact-Interleaved Packaging Method of Power Module With Dynamic Characterization of 4H-SiC MOSFET and Development of Power Electronic Converter at Extremely High Junction Temperature

An All-SiC High-Frequency Boost DC–DC Converter Operating at 320 °C Junction Temperature

High-voltage full-SiC power module: Device fabrication, testing and high frequency application in kW-level converter

Design and Application of A 1200v Ultra-Fast Integrated Silicon Carbide Mosfet Module

A High Performance Power Module with >10kV capability to Characterize and Test In Situ SiC Devices at >200°C Ambient

Comparative Study of Thermal Performance of a SiC MOSFET Power Module Integrated with Vapor Chamber for Traction Inverter Applications

Electro-Thermal Coupling Characteristics and Modeling of SiC MOSFET Modules under High Pulse Current Conditions

Performance Evaluation of High-Power SiC MOSFET Modules in Comparison to Si IGBT Modules