Abstract:Article Study on Gas Flow Characteristics in Automobile Micro Gas Sensors Longkang Han 1, Feng Han 2,*, Ruquan Liang 2, Jianhui Shi 2, Dengbo Zhang 2, Yuanmei Song 2 and Kun Sun 3 1 School of logistics, Linyi University, Linyi 276000, China 2 School of Mechanical and Vehicle Engineering, Linyi University, Linyi 276000, China 3 School of Mechatronics Engineering, Anhui University of Science and Technology, Huainan 232001, China * Correspondence: hanfeng@lyu.edu.cn Received: 25 July 2024; Revised: 14 August 2024; Accepted: 22 August 2024; Published: 5 September 2024 Abstract: Micro gas sensors are integral to the automotive industry, particularly for monitoring the behavior of rarefied gases. The occurrence of inhomogeneous temperature gradients across microchannels can initiate gas flow, a principle that can be effectively utilized to develop micro gas sensors for automotive applications. This manuscript presents a novel microchannel design that incorporates quadrilateral sections with distinct temperature profiles. The characteristics of gas flow within this microchannel have been simulated numerically through the Direct Simulation Monte Carlo (DSMC) method, a sophisticated approach for such analyses. Subsequently, an optimization study is conducted to characterize the gas pumping properties of the microchannel. The results demonstrate that gas preferentially moves from a quadrilateral with lower temperature to one with higher temperature. The validity of this gas flow within the microchannel is confirmed. Notably, the gas flow velocity peaks at a Knudsen number of 3. This condition corresponds to a transitional flow regime, indicating that the microchannel’s gas pumping capability is most robust during this phase. Furthermore, it is observed that an increase in the quadrilateral aspect ratio leads to a reduction in gas flow velocity. These results can be applied to design micro gas sensors for various industry fields..

A micro channel integrated gas flow sensor for high sensitivity

Design of Thermal Liquid Flow Microsensor

Non-Silicon MEMS Calorimetric Gas Flow Sensor

Micro Flow Sensor Based on Two Closely Spaced Amperometric Sensors

A Novel Vanadium Dioxide-Based Dual-Heater Microfluidic Thermal Flow Sensor with Record High Sensitivity

High Performance Bidirectional Thermal Gas Flow Sensor of (100) Silicon Single-Sided Fabrication by 45-Tilted Dicing

Design and Modeling of Vanadium Dioxide-Based High-Sensitivity Microfluidic Calorimetric Sensors

Thermal Conductivity Gas Sensor with Enhanced Flow-Rate Independence

Thermal Gas Flow Measurement Based on Single Sensor

Development of Low Velocity Gas Flow Sensor

A Front-Side Microfabricated Thermoresistive Gas Flow Sensor for High-Performance, Low-Cost and High-Yield Volume Production

A Three-Dimensional Integrated Micro Calorimetric Flow Sensor in CMOS MEMS Technology

Velocity and Temperature Simulation of a New Air Flow Sensor

A liquid-metal-based microscale calorimetric in-chip flow sensor for flow rate measuring

Vanadium Dioxide-Based High Sensitivity Dual-Heater Calorimetric Microfluidic Sensor

Study on new gas flow sensor based on hot-film probe

Investigation on the Effective Measures for Improving the Performance of Calorimetric Microflow Sensor

A New Method for Velocity Measurement of Gas-Liquid Two-Phase Flow Based on C~4D Technique

Study on Gas Flow Characteristics in Automobile Micro Gas Sensors

Single (111)-Wafer Single-Side Microfabrication of Suspended p + Si/n + Si Thermopile for Tiny-Size and High-Sensitivity Thermal Gas Flow Sensors

Development of an Energy-Efficient and Highly Sensitive Thermal Microsensor for Measuring Flow Rates of Fluids