Abstract:The geometry of electrodes is one of the most important factors in determining the performance of orthogonal-strip detectors. The aim of this work is to study the performance of a 5 mm thick cross-strip CdZnTe detector with different electrode widths. Our study consists of two main parts, simulations and experiments. We utilized four different anode sizes ranging from 0.1 mm to 0.6 mm. The anodes were interspersed with steering electrodes with varying sizes from 0.3 mm to 0.85 mm. The maximum gap size between the anodes and steering electrode strips was set to 0.3 mm, while the minimum gap size was 0.125 mm. The performance of the detector was investigated in terms of the steering electrode bias voltage, the energy resolution, and the charge sharing effect. For simulations, we developed a C++ based simulation program for charge transport inside the CdZnTe detector and charge collection at the electrodes. For photon interactions we used GEANT4 toolkit and for electric field and weighting potential simulations we used COMSOL software. The results demonstrated that -50 V is the optimal steering electrode bias for our detector when -500 V was applied to the cathodes and that the energy resolution performance drops with increasing steering electrode width. Also, the charge sharing effect becomes more dominant for larger steering electrode sizes. The experimental result are further compared with the simulations. The results are in a good agreement and the comparison validates our simulation model. Although, our simulation framework has need of better estimation for the intrinsic noise of CdZnTe. These results suggest that an optimization study between electrode widths and steering electrode bias is required to obtain the best performance in orthogonal-strip CdZnTe detectors.

Effects of Different Orientation on CdZnTe Detectors

Effects of Sample Processing on the Performance of Cdznte Crystals

Growth of (111)cdte on a Buffer Layer of (100)znse by MBE

Investigation of the Influence of Infrared Illumination on the Pulse Shapes of Output Signals of CdZnTe Detectors

Direct comparison of the performance of CZT detectors contacted with various metals

Investigating the influence of CdZnTe and HgCdTe material quality on detector image performance

Optimization study of the electrode design of a 5 mm thick orthogonal-strip CdZnTe detector system

Progress in the Development of CdZnTe Unipolar Detectors for Different Anode Geometries and Data Corrections

Investigation of the CdZnTe (2 1 1) and (1 3 3) films grown on GaAs (2 1 1) controlled by temperature: Experiment and first-principles calculations

Pbte Photovoltaic Mid-Ir Detectors

Strategy for Performance Enhancement of Cd1-XZnXTe/CdS Core/shell Quantum Dot Sensitized Solar Cells Through Band Adjustment

Identification of twin and nanoscale Te precipitations in CdZnTe crystals grown by vertical gradient method with HRTEM

Twisted ZB?CdTe/RS?PbTe (111) heterojunction as a metastable interface structure

Characterization of Cdznte Crystals by Resistivity Measurements and Chemical Etching

Development of 4×4 Pixel CdZnTe Detector

Interface optimization of free-standing CdZnTe films for solar-blind ultraviolet detection: Substrate dependence

PERFORMANCE IMPROVEMENT OF CZT DETECTORS BY LINE ELECTRODE GEOMETRY

Effect of passivation sequence on the performance of planar CdZnTe detectors

Electronic Properties of Aluminum/cdznte Interfaces

Effect of CZT Powder Burying CZT Crystal on Annealing in Cd Atmosphere

Enhanced UV detection performance of a CdZnTe-based photodetector through surface polishing treatments