Abstract:The higher voltage blocking capability and faster switching speed of silicon-carbide (SiC) mosfets have the potential to replace Si insulated gate bipolar transistors (IGBTs) in medium-low-voltage and high-power applications. In this paper, a state-of-the-art commercially available 325 A, 1700 V SiC mosfet module has been fully characterized under various load currents, bus voltages, and gate resistors to reveal their switching capability. Meanwhile, Si IGBT modules with similar power ratings are also tested under the same conditions. From the test results, several interesting points have been obtained: different to the Si IGBT module, the over-shoot current of the SiC mosfet module increases linearly with the increase of the load current and it has been explained by a model of the over-shoot current proposed in this paper; the induced negative gate voltage due to the complementary device turn-off (crosstalk effect) is more harmful to the SiC mosfet module than the induced positive gate voltage during turn-on when the gate off-voltage is 6 V; the maximum dvdt and didt (electromagnetic interference) during switching transients of the SiC mosfet module are close to those of the Si IGBT module when the gate resistance is larger than 8 but the switching loss of the SiC mosfet module is much smaller; the switching losses of the Si IGBT module are greater than those of the SiC mosfet module even when the gate resistance of the former is reduced to zero. An accurate power loss model, which is suitable for a three-phase two-level converter based on SiC mosfet modules considering the power loss of the parasitic capacitance, has been presented and verified in this paper. From the model, a 96.2 efficiency can be achieved at the switching frequency of 80kHz and the power of 100 kW.

Development and comparison of high-power semiconductor switches

Comparison of the State-of-the-art High Power IGBTs, GCTs and ETOs

IGCT AND IEGT--NEW HIGH POWER SILICON SWITCHES SUITABLE FOR STATCOM

Comparison of High Power IGBT , IGCT and ETO for Pulse Applications

The Advantages and Applications of IGBT Compared with Conventional BJT and MOSFET

Comparing SiC Switching Power Devices: MOSFET, NPN Transistor and GTO Thyristor

Performance Evaluation of Switch Devices Equipped in High-Power Three-Level Inverters

Enhancing Turn-off Performance in IGCT-Based High Power Applications—Part Ⅱ: Hybrid Switch with IGBT Integration and Experimental Validation

Experimental comparison of SiC GTO and ETO for pulse power applications

Power-Switching Applications Beyond Silicon: Status and Future Prospects of Sic and Gan Devices

Evaluation of Advanced Si and SiC Switching Components for Army Pulsed Power Applications

Silicon MOS Controlled Bipolar Power Switching Devices Using Trench Technology

Design and Characterization of High-Voltage Silicon Carbide Emitter Turn-off Thyristor

4.5Kv Insulated Gate Triggered Thyristor (IGTT) with High $di/dt$ Characteristics for Pulse Power Applications

Development and Perspective of High Power Semiconductor Device

A Comparative Study on the Switching Performance of GaN and Si Power Devices for Bipolar Complementary Modulated Converter Legs

Comparison of MCT and Clustered IGBT in High Power Applications

Theoretical and Experimental Study of 22 Kv SiC Emitter Turn-OFF (ETO) Thyristor

Development of a Scalable Power Semiconductor Switch (SPSS)

Performance Evaluation of High-Power SiC MOSFET Modules in Comparison to Si IGBT Modules