Thermodynamic analysis of optical refrigeration in semiconductors

dongyan ding,j b wang,s q yu,s r johnson,y h zhang

DOI: https://doi.org/10.1109/QELS.2005.1549320

2005-01-01

Abstract:The cooling efficiency and optimum bandgap energy for semiconductor optical refrigeration are investigated from the standpoint of both the first and second laws of thermodynamics.

What problem does this paper attempt to address?

Investigations on Coupling Between Performance and External Operational Conditions for a Semiconductor Refrigeration System

Yijian He,Chao Cao,Jie Wu,Guangming Chen

DOI: https://doi.org/10.1016/j.ijrefrig.2019.09.021

IF: 4.14

2020-01-01

International Journal of Refrigeration

Abstract:Semiconductor refrigeration utilizes Peltier effects to achieve cooling, and does not use any refrigerants. Due to its simple and compact structure, semiconductor refrigeration has become one of the most promising cooling technologies. However, as a semiconductor refrigeration system, the interactions among the main external factors that affect its performance are complicated. Based on experimental results and thermodynamic models, deeper insights are presented into semiconductor refrigeration in this study. Broader coupling between performance and main external parameters are analyzed, including the driving voltage of fans at both the hot and cold sides, and the working voltage of the semiconductor refrigeration chip. Optimal external parameters corresponding to a maximum COP and a maximum cooling capacity are obtained. For example, under the optimal working voltage of a semiconductor refrigeration chip with a fan driving voltage of 4 V at the hot side and 6 V at the cold side, Q(c,max) was increased by 60%, and was 326% higher than chips under 2 V and 10 V working voltages. Under the optimal fan driving voltage at the hot side with a 6 V fan driving voltage at the cold side and a 3 V working voltage of the chip, the maximum value of COP was respectively 140.3% and 104.3% larger than those with 0 V and 12 V fan driving voltages at the hot side. It is also found that the driving voltage of fans at the hot side has a greater influence on the optimal working voltage of a semiconductor refrigeration chip. This investigation could be applied in the optimization of the design and operational control of semiconductor refrigeration systems. (C) 2019 Elsevier Ltd and IIR. Allrights reserved.
Analysis of Optothermionic Refrigeration Based on Semiconductor Heterojunction

P Han,KJ Jin,YL Zhou,X Wang,ZS Ma,SF Ren,AG Mal'shukov,KA Chao

DOI: https://doi.org/10.1063/1.2188249

IF: 2.877

2006-01-01

Journal of Applied Physics

Abstract:We have examined the theory of optothermionic refrigeration combining the ideas of laser cooling and thermionic cooling [Mal’shukov and Chao, Phys. Rev. Lett. 86, 5570 (2001)] and its estimation on thermal energy extraction by using self-consistent calculations with the drift-diffusion model in this paper. Both the Auger and the Shockley-Read-Hall dissipation processes are considered. For GaAs∕AlGaAs systems with various impurity concentrations and different widths of quantum well, it is found that the optothermionic cooler can extract thermal energy at a rate as much as 10W∕cm2. The information to perform optothermionic refrigeration in real devices have also been provided.
Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Yuanyuan Zhou,Jianlin Yu

DOI: https://doi.org/10.1016/j.ijrefrig.2011.12.003

IF: 4.14

2012-01-01

International Journal of Refrigeration

Abstract:This paper presents a generalized theoretical model for the optimization of a thermoelectric cooling (TEC) system, in which the thermal conductances from the hot and cold sides of the system are taken into account. Detailed analyses of the optimal allocation of the finite thermal conductance between the cold-side and hot-side heat exchangers of the TEC system are conducted by considering the constraint of the total thermal conductance. The analysis results show that the maximum coefficient of performance (COP) and the maximum cooling capacity of the TEC system can be obtained when the finite total thermal conductance is optimally allocated. Furthermore, the effects of the total thermal conductance and the heat capacity rate of the cooling fluid on the performance of the TEC system and the optimal thermal conductance allocation ratio are also examined.
Charge and thermal modeling of a semiconductor-based optical refrigerator

Yurii V. Morozov,Shubin Zhang,Boldizsar Janko,Masaru Kuno

DOI: https://doi.org/10.1063/1.5049376

IF: 4

2018-10-29

Applied Physics Letters

Abstract:Despite multiple attempts to achieve optical refrigeration in very high (99.5%) external quantum efficiency (EQE) GaAs, no cooling has been observed to date. In this study, we investigate optical refrigeration in GaAs by numerically solving the transient drift-diffusion equation coupled to Poisson's equation. The charge carrier distributions we obtain, together with the heat diffusion equation, allow us to observe the spatial and temporal evolution of cooling/heating within GaAs. Our results indicate that maximum cooling occurs at a laser intensity different from that which maximizes EQE. An 11-fold difference in intensity exists with a corresponding 6-fold difference in cooling power. We ultimately find that samples suspended in vacuum using a 250 μm SiO2 fiber cool to 88 K, starting from room temperature. These results emphasize the critical importance of choosing an appropriate laser excitation intensity to achieve optical refrigeration along with minimizing the conductive heat load on the refrigerator. Furthermore, results of this study are applicable towards analyzing the optical response of other optoelectronic systems where accurate charge and/or heat diffusion modeling is critical.

physics, applied
Study on the Performance of a Solid-State Thermoelectric Refrigeration System Equipped with Ionic Wind Fans for Ultra-Quiet Operation

Yijian He,Rong Li,Yuchen Fan,Youming Zheng,Guangming Chen

DOI: https://doi.org/10.1016/j.ijrefrig.2021.06.017

IF: 4.14

2021-01-01

International Journal of Refrigeration

Abstract:Conventional compression refrigeration systems generate considerable noise and vibration. The noise results in serious, negative impacts on people. Thermoelectric refrigeration technologies are considered a potential way to overcome these challenges. A novel thermoelectric refrigeration system, wherein thermoelectric chips are coupled with ionic wind fans, is proposed. Its performance was experimentally investigated and compared with theoretical results. The actual operating noise of the thermoelectric refrigeration system is only 4.2 dB(A), which is much lower than the maximum noise value that does not affect sleep. From experiments under different operating conditions, the optimal operating voltage of the thermoelectric chip is 5.5 V at 283.15 and 313.15 K on the cold and hot sides. The maximum coefficient of performance ( COP ) values reaches 0.28 and 0.31, which are equivalent to those of a system coupled with mechanical fans. Additionally, an ionic wind fan has an optimal operating voltage of 10.8 kV to maximize its air supply efficiency. Notably, such an operating voltage might be distinguished from the optimal voltage that achieves maximum operational performance for the new system. When the operating voltage of the thermoelectric chip is 5 V, the optimal operating voltage to obtain a maximum COP of 0.31 is 11.1 kV. Moreover, the experimental refrigeration capacity is greater than 8 W. The new system shows the ultra quiet ability to operate at a large refrigeration capacity, and has good potential in applications, such as advanced refrigeration, building air-conditioning and ventilation systems. (c) 2021 Elsevier Ltd and IIR. All rights reserved.
Breakthrough of optical refrigeration: Laser cools a semiconductor by 40 K

Jun Zhang,Dehui Li,Qihua Xiong

2013-01-01

Laser focus world

Abstract:Optical refrigeration has reached a new stage in which semiconductors can be substantially cooled by laser light. This process could become practical for cooling electronics and optoelectronics, possibly leading to athermal lasers.
Experimental minimum of condensed-phase optical refrigeration

Zhuoming Zhang,Yang Ding,Peter J. Pauzauskie,Mansoor Sheik-Bahae,Denis V. Seletskiy,Masaru Kuno

2024-08-06

Abstract:Since the first demonstration of optical refrigeration in a rare-earth-doped glass nearly 30 years ago, the nascent field of laser cooling solids has progressed significantly. It is now possible to demonstrate payload cooling to ~91 K using laser-excited ytterbium-doped fluoride crystals. Realizing lower temperatures, however, requires achieving ultrahigh purities in existing rare earth-doped crystals or establishing new cooling media. For the latter, semiconductors are an obvious choice given higher cooling power densities and predicted cooling floors as low as 10 K. This has stimulated a race to demonstrate the optical refrigeration of a semiconductor. It is therefore timely to systematize the necessary and sufficient experimental minimum criteria for reporting optical refrigeration results to elevate the reliability and reproducibility of current and future optical refrigeration claims. We distill an optical refrigeration Experimental Minimum (EM) that we propose will standardize the reporting of new cooling results. EM tenets fall into the following categories: demonstrations of explicit heating vs cooling, optical cooling metrics, thermodynamic consistency, and reliable temperature measurements. All optical refrigeration claims should demonstrate the above four criteria to ensure their reliability and verifiability. We further propose that the EM serve as a guide for reviewing literature claims in the field.

Optics
Electroluminescence refrigeration in semiconductors

shuiqing yu,dongyan ding,jiangbo wang,s r johnson,yonghang zhang

DOI: https://doi.org/10.1109/CLEO.2006.4628594

2006-01-01

Abstract:An InGaAs light emitting diode monolithically integrated with a suspended lens is proposed as a prototype semiconductor electroluminescence refrigeration device. Simulations predict that a temperature drop up to 6degC is achievable in this device.
Cryogenic Cooling Using Tunneling Structures with Sharp Energy Features.

HL EDWARDS,Q NIU,GA GEORGAKIS,AL DELOZANNE

DOI: https://doi.org/10.1103/physrevb.52.5714

1995-01-01

Abstract:Thermoelectric cooling, based upon the extraction of hot electrons and holes from a metallic electron gas, holds unrealized potential for refrigeration at cryogenic temperatures. We discuss the performance of two such electronic refrigerators: the quantum-dot refrigerator (QDR) and the normal-insulator-superconductor (NIS) refrigerator. We obtain the QDR base temperature using a numerical simulation and verify the validity of certain simplifying assumptions which allow refrigerating performance to be summarized on a diagram of ambient temperature versus electronic temperature. In this way, we find that the best refrigeration is obtained with the electronic distribution far from the equilibrium Fermi-Dirac function and the temperature reduction achieved is limited by the rate at which phonons are absorbed. We predict that, with sufficient thermal isolation, electronic devices could be cooled to a small fraction of the ambient temperature using these solid-state refrigerators. The NIS refrigerator should be capable of cooling thin-film devices from above 300 mK to below 100 mK; the QDR will cool macroscopic metallic samples in the mu K or nK range. We also discuss topics related to thermoelectric refrigeration including other cryogenic thermoelectric cooling schemes, the validity of the linear-response theory of thermoelectric effects, the refrigerating efficiency of an optimized thermoelectric refrigerator, and the overall cooling power of thermoelectric refrigeration.
Modeling Thermoelectric Effects in Piezoelectric Semiconductors: New Fully Coupled Mechanisms for Mechanically Manipulated Heat Flux and Refrigeration

Yilin Qu,Ernian Pan,Feng Zhu,Feng Jin,Ajit K. Roy

DOI: https://doi.org/10.1016/j.ijengsci.2022.103775

2023-01-01

Abstract:We present a continuum theory for analyzing the interaction between the thermoelectric and mechanical fields in piezoelectric semiconductors. The balance laws and dissipation inequality are formulated in the reference configuration. Thermodynamically consistent constitutive equa-tions are derived, including the drift-diffusion current, Fourier's law for thermal flux, Seebeck effect, and Peltier effect, by introducing a generalized Fick's law. The heat conduction equation and Joule heating generation with the semiconducting effect are derived by combing the energy balance and the second Gibbs relation. The framework is then geometrically linearized for ap-plications in small deformation of crystal solids. Based on the newly developed framework, two new coupling mechanisms between thermoelectric and mechanical fields in crystals of class of 6mm are identified. 1) A mechanical load can block both electron and thermal fluxes in the loading area via the mechanically induced potential well. At a strain level of 1%, the current and heat flow can be reduced by as much as 80%. This effect facilitates the design of new switching devices. 2) The mechanical load can surprisingly act as a current amplifier through the induced potential barrier. Furthermore, making use of the new and unusual Joule heating generation, thermal dipoles can be created, indicating that mechanical loading can lead to local refrigeration. Via a simple numerical model, we demonstrate that the mechanical deformation can produce a temperature difference of 0.06 K at the strain level of around 1%. Based on this new and exciting cooling mechanism, we further propose a novel multi-stage pyramidal cascade device for refrigeration. The framework in this paper provides a foundation for analyzing multiple physics problems in semiconductor structures and also potential ideas for switching and refrigeration devices. Since it is based on finite deformation theory, the present framework would be helpful in analyzing the behavior of emerging flexible semiconductor materials or developing the corre-sponding computational methods.
Thermodynamic Analysis of Semiconductor Thermoelectric Generator

贾磊,陈则韶,胡芃,孙炜

DOI: https://doi.org/10.3969/j.issn.0253-2778.2004.06.006

2004-01-01

Abstract:Based on the steady conduction equation,thermodynamic analysis is performed on generator components,a basic model of semiconductor thermoelectric generator is constituted.The temperature function,output power and generating efficiency of p and n semiconductors are obtained.The influence of Thomson heat,often ignored in traditional analysis process,is discussed at the same time.Results indicate that Thomson heat can’t be ignored in cases of low-temperature and great temperature differences.
Performance Research of a Semiconductor Cooling Device with Solid Desiccant

Zheng Yuwei,Liu Xiaohua,Tu Rang

DOI: https://doi.org/10.3969/j.issn.0253-4339.2013.05.059

2013-01-01

Abstract:emiconductor refrigeration,known as thermoelectric refrigeration,is applied widely in fields such as industrial production and daily life,due to the advantages of rapid cooling and easy control.The heat dissipation on the hot side is the principle element restricting the coefficient of semiconductor refrigeration.In conventional device,dehumidification is realized by condensing dehumidification method,which lowers the temperature of the cold side of semiconductor and hence restricts the system COP.The semiconductor refrigeration model with heat pipe and solid desiccant is built in this paper,and verified by the experimental results of a 6-stage semiconductor refrigeration equipment with heat pipes.Then the model is used to predict the cooling and dehumidification performances with solid desiccant.The COP of the proposed semiconductor refrigeration system is 1.78,which is much higher than that shown in literature with condensing dehumidification under the same dehumidification amount.
Optomechanical cooling with coherent and squeezed light: the thermodynamic cost of opening the heat valve

Juliette Monsel,Nastaran Dashti,Sushanth Kini Manjeshwar,Jakob Eriksson,Henric Ernbrink,Ebba Olsson,Emelie Torneus,Witlef Wieczorek,Janine Splettstoesser

DOI: https://doi.org/10.1103/PhysRevA.103.063519

2021-05-18

Abstract:Ground-state cooling of mechanical motion by coupling to a driven optical cavity has been demonstrated in various optomechanical systems. In our work, we provide a so far missing thermodynamic performance analysis of optomechanical sideband cooling in terms of a heat valve. As performance quantifiers, we examine not only the lowest reachable effective temperature (phonon number) but also the evacuated-heat flow as an equivalent to the cooling power of a standard refrigerator, as well as appropriate thermodynamic efficiencies, which all can be experimentally inferred from measurements of the cavity output light field. Importantly, in addition to the standard optomechanical setup fed by coherent light, we investigate two recent alternative setups for achieving ground-state cooling: replacing the coherent laser drive by squeezed light or using a cavity with a frequency-dependent (Fano) mirror. We study the dynamics of these setups within and beyond the weak-coupling limit and give concrete examples based on parameters of existing experimental systems. By applying our thermodynamic framework, we gain detailed insights into these three different optomechanical cooling setups, allowing a comprehensive understanding of the thermodynamic mechanisms at play.

Quantum Physics
Analytical Model of Thermal Field in Polymer Thermo-Optic Devices

余辉,江晓清,杨建义,李锡华,王明华

DOI: https://doi.org/10.3969/j.issn.1674-4926.2004.08.021

2000-01-01

Abstract:Thermooptical polymer devices is impor tant integrated optical devices.In this paper,based on the theory of heat transf erring,an thermal model of thermooptical devices is established.The principle of heat transferring is presented first and then the thermal model is analyzed and set up.This work can be used in the computer-aided design of the device. -
Research on Cooling System of High Power Semiconductor Laser Based on Thermoelectric Semiconductor Refrigerator

Ningning Dong,Jinjiang Cui,Jiangen Xu

DOI: https://doi.org/10.1109/eitce47263.2019.9094797

2019-10-01

Abstract:The cooling system of high power semiconductor laser based on thermoelectric semiconductor refrigerator is designed to solve the instability of output power of laser caused by temperature rise. Bi2Te3 thermoelectric cooler with maximum thermoelectric optimum coefficient at room temperature can accurately control the temperature in the range of 0.1 °C. It realizes the dual functions of refrigeration and heating by loading lower DC voltage at both ends and changing the direction of current. The laser works in the optimum temperature range, which can make the output of the laser safer and more stable. The experimental equipment is set up and the whole system is tested. The experimental results show that the temperature of heat sink increases with the increase of environmental temperature and tends to accelerate. The temperature of heat sink is relatively stable in the range of general medical treatment environmental temperature from 20°C to 30°C. The output power of high power laser based on thermoelectric semiconductor refrigerator is tested at a typical environmental temperature of 25°C. The deviation between the output power and the target power is less than 2%, which can meet the stable output of high power semiconductor laser treatment and ensure the stability and safety of laser output.
Design, fabrication and characterisation of InGaAs/InP single-photon avalanche diode detectors

Ryan E. Warburton,Sara Pellegrini,Lionel Tan,Jo Shien Ng,Andrey Krysa,Kris Groom,John P.R. David,Sergio Cova,Gerald S. Buller

DOI: https://doi.org/10.48550/arXiv.physics/0605073

2006-05-08

Abstract:This paper demonstrates the performance of planar geometry InGaAs/InP avalanche diodes, specifically designed and fabricated for Geiger-mode operation at wavelengths around 1550nm, in terms of dark count rate, single-photon detection efficiency, afterpulsing and photon-timing jitter.

Instrumentation and Detectors
Efficiency and dissipation in a two-terminal thermoelectric junction, emphasizing small dissipation

O. Entin-Wohlman,J-H Jiang,Y. Imry

DOI: https://doi.org/10.1103/PhysRevE.89.012123

2013-09-23

Abstract:The efficiency and cooling power of a two-terminal thermoelectric refrigerator are analyzed near the limit of vanishing dissipation (ideal system), where the optimal efficiency is the Carnot one, but the cooling power then unfortunately vanishes. This limit, where transport occurs only via a single sharp electronic energy, has been referred to as "strong coupling" or "the best thermoelectric". It follows however, that "parasitic" effects that make the system deviate from the ideal limit, and reduce the efficiency from the Carnot limit, are crucial for the usefulness of the device. Among these parasitics, there are: parallel phonon conduction, finite width of the electrons' transport band and more than a single energy transport channel. In terms of a small parameter characterizing the deviation from the ideal limit, the efficiency and power grow linearly, and the dissipation {\em quadratically}. The results are generalized to the case of broken time-reversal symmetry, and the major nontrivial changes are discussed. Finally, the recent universal relation between the thermopower and the asymmetry of the dissipation between the two terminals is briefly discussed, including the small dissipation limit.

Mesoscale and Nanoscale Physics
Performance Analysis on a Solar Thermoelectric Refrigerator

Luo Bin,Dai Yanjun

DOI: https://doi.org/10.3969/j.issn.0253-4339.2006.05.002

2006-01-01

Abstract:The basic structure of a thermoelectric refrigerator driven by solar cells was described. A theoretical model of a solar thermoelectric refrigerator was set up and numerical simulation of the system was performed. The effect of different solar insolation rate and velocity of air on solar thermoelectric refrigeration system was analyzed. The results indicate that there is an optimum solar insolation rate,at which the system can achieve maximum cooling production. When the solar insolation rate is about 200-1000 W/m2,COP for the specified system decreases with the decrease of insolation rate. Under given conditions,the system working current increases in the direction of the optimum system working current with the increase of air velocity.
Application of semiconductor refrigeration technology in college physical experiments

ZHENG Qiao,LIU Hu

DOI: https://doi.org/10.3969/j.issn.1005-4642.2008.02.010

2008-01-01

Abstract:Semiconductor refrigeration is a solid state cooling method that uses holes and electrons to transfer heat. The design ideas and the advantages of applying semiconductor refrigeration in physical experiment are explained, with examples of the semiconductor refrigerated constant-temperature calorimeter and the heat characteristic experiment of semiconductor.
Photoluminescent cooling with incoherent light

Sushrut Ghonge,Masaru Kuno,Boldizsár Jankó

DOI: https://doi.org/10.1063/5.0217272

2024-08-22

Abstract:Optical refrigeration using anti-Stokes photoluminescence is now well established, especially for rare-earth-doped solids where cooling to cryogenic temperatures has recently been achieved. The cooling efficiency of optical refrigeration is constrained by the requirement that the increase in entropy of the photon field must be greater than the decrease in entropy of the sample. Laser radiation has been used in all demonstrated cases of optical refrigeration with the intention of minimizing the entropy of the absorbed photons. Here, we show that as long as the incident radiation is unidirectional, the loss of coherence does not significantly affect the cooling efficiency. Using a general formulation of radiation entropy as the von Neumann entropy of the photon field, we show how the cooling efficiency depends on the properties of the light source such as wavelength, coherence, and directionality. Our results suggest that the laws of thermodynamics permit optical cooling of materials with incoherent sources such as light emitting diodes and filtered sunlight almost as efficiently as with lasers. Our findings have significant and immediate implications for design of compact, all-solid-state devices cooled via optical refrigeration.

Optics,Other Condensed Matter,Statistical Mechanics

Thermodynamic analysis of optical refrigeration in semiconductors

Investigations on Coupling Between Performance and External Operational Conditions for a Semiconductor Refrigeration System

Analysis of Optothermionic Refrigeration Based on Semiconductor Heterojunction

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Charge and thermal modeling of a semiconductor-based optical refrigerator

Study on the Performance of a Solid-State Thermoelectric Refrigeration System Equipped with Ionic Wind Fans for Ultra-Quiet Operation

Breakthrough of optical refrigeration: Laser cools a semiconductor by 40 K

Experimental minimum of condensed-phase optical refrigeration

Electroluminescence refrigeration in semiconductors

Cryogenic Cooling Using Tunneling Structures with Sharp Energy Features.

Modeling Thermoelectric Effects in Piezoelectric Semiconductors: New Fully Coupled Mechanisms for Mechanically Manipulated Heat Flux and Refrigeration

Thermodynamic Analysis of Semiconductor Thermoelectric Generator

Performance Research of a Semiconductor Cooling Device with Solid Desiccant

Optomechanical cooling with coherent and squeezed light: the thermodynamic cost of opening the heat valve

Analytical Model of Thermal Field in Polymer Thermo-Optic Devices

Research on Cooling System of High Power Semiconductor Laser Based on Thermoelectric Semiconductor Refrigerator

Design, fabrication and characterisation of InGaAs/InP single-photon avalanche diode detectors

Efficiency and dissipation in a two-terminal thermoelectric junction, emphasizing small dissipation

Performance Analysis on a Solar Thermoelectric Refrigerator

Application of semiconductor refrigeration technology in college physical experiments

Photoluminescent cooling with incoherent light