Breakthrough of optical refrigeration: Laser cools a semiconductor by 40 K

Jun Zhang,Dehui Li,Qihua Xiong

2013-01-01

Laser focus world

Abstract:Optical refrigeration has reached a new stage in which semiconductors can be substantially cooled by laser light. This process could become practical for cooling electronics and optoelectronics, possibly leading to athermal lasers.

What problem does this paper attempt to address?

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

Limin Qi,Rui Zheng,Dongli Liu,Haiyue Pei,Ding Zhao,Min Qiu

DOI: https://doi.org/10.1088/1757-899x/1301/1/012168

2024-01-01

IOP Conference Series: Materials Science and Engineering

Abstract:This study introduces a novel ice lithography system integrated with a low-vibration micro-machined Joule-Thomson cooler. Ice lithography is an eco-friendly method for high-resolution nanofabrication on delicate substrates and requires to operate below 130 K in the vacuum of a microscope chamber. Previously, liquid nitrogen rather than cryocoolers was used to cool the system due to its low vibration, but it is both bulky and costly. To overcome these challenges, this study employs a low-vibration micro-machined cooler in a scanning electron microscope (SEM) for ice lithography. The design and methodology of the system are described in detail. The results show that the substrate can reach a temperature of 105 K within 30 minutes with a measured mechanical vibration of less than 10 nm, enabling high-resolution nanofabrication. As proof of concept, the system successfully fabricates nanoscale patterns on a silicon wafer. This low-vibration cooling system has great potential for use in cryogenic electron microscopes (cryo-EMs) in the future.
Laser Cooling Of A Semiconductor By 40 Kelvin: An Optical Refrigerator Based On Cadmium Sulfide Nanoribbons

Jun Zhang,Dehui Li,Renjie Chen,Qihua Xiong

DOI: https://doi.org/10.1117/12.2002713

2013-01-01

Abstract:We have demonstrated the first net laser cooling of semiconductors using CdS nanoribbons (or nanobelts) in this work. This net cooling effect is found to be facilitated by resonant high order annihilation of longitudinal optical (LO) phonons due to a strong exciton-LO phonon Frohlich interactions. Using a pump-probe luminescence thermometry technique to measure the local temperature change, we have achieved as large as 40 K cooling temperature from room temperature pumped by a 514 nm laser while a 532 nm laser pumping led to a cooling of 20 K. At 100 K, only the 532 nm laser pumping can lead to a net cooling of around 15 K. Our work opens new directions to search laser cooling semiconductors and makes it feasible to achieve all solid-state cryocoolers based on semiconductors.
Laser cooling of a semiconductor by 40 kelvin: an optical refrigerator based on cadmium sulfide nanoribbions

Jun Zhang,Dehui Li,Renjie Chen,Qihua Xiong

DOI: https://doi.org/10.1117/12.2002713

2013-03-11

Abstract:We have demonstrated the first net laser cooling of semiconductors using CdS nanoribbons (or nanobelts) in this work. This net cooling effect is found to be facilitated by resonant high order annihilation of longitudinal optical (LO) phonons due to a strong exciton-LO phonon Fröhlich interactions. Using a pumpprobe luminescence thermometry technique to measure the local temperature change, we have achieved as large as 40 K cooling temperature from room temperature pumped by a 514 nm laser while a 532 nm laser pumping led to a cooling of 20 K. At 100 K, only the 532 nm laser pumping can lead to a net cooling of around 15 K. Our work opens new directions to search laser cooling semiconductors and makes it feasible to achieve all solid-state cryocoolers based on semiconductors.

Materials Science
Laser cooling in semiconductors (Conference Presentation)

Jun Zhang

DOI: https://doi.org/10.1117/12.2264535

2017-06-07

Abstract:Laser cooling of semiconductor is very important topic in science researches and technological applications. Here we will report our progresses on laser cooling in semiconductors. By using of strong coupling between excitons and longitudinal optical phonons (LOPs), which allows the resonant annihilation of multiple LOPs in luminescence up-conversion processes, we observe a net cooling by about 40 K starting from 290 kelvin with 514-nm pumping and about 15 K starting from100 K with 532-nm pumping in a semiconductor using group-II–VI cadmium sulphide nanobelts. We also discuss the thickness dependence of laser cooing in CdS nanobelts, a concept porotype of semiconductor cryocooler and possibility of laser cooling in II-VI semiconductor family including CdSSe、CdSe, CdSe/ZnTe QDs and bulk CdS et al., Beyond II-VI semiconductor, we will present our recent progress in laser cooling of organic-inorganic perovskite materials, which show a very big cooling power and external quantum efficiency in 3D and 2D case. Further more, we demonstrate a resolved sideband Raman cooling of a specific LO phonon in ZnTe, in which only one specific phonon resonant with exciton can be cooled or heated. In the end, we will discuss the nonlinear anti-Stokes Raman and anti-Stokes photoluminescence upcoversion in very low temperature as low as down to liquid 4.2 K. In this case, the anti-Stokes resonance induces a quadratic power denpendece of anti-Stokes Raman and anti-Stokes PL. We proposed a CARS-like process to explain it. This nonlinear process also provides a possible physics picture of ultra-low temperatures phonon assisted photoluminescence and anti-Stokes Raman process.

Engineering
Laser Cooling of a Solid by 21 K Starting from Room Temperature

X Luo,MD Eisaman,TR Gosnell

DOI: https://doi.org/10.1109/iqec.1998.680467

1998-01-01

Abstract:Summary form only given.We demonstrate the laser cooling of an impurity-doped insulator by 0.3 K below room temperature. The cooling effect takes advantage of anti-Stokes photoluminescence of laser-excited Yb/sup 3+/ impurities and relies on the near-unit fluorescence quantum efficiency for this ion in a highly purified ZrF/sub 4/-BaF/sub 2/-LaF/sub 3/-ALF/sub 3/-NaF-PbF/sub 2/ (ZBLANP) glass host.
Laser cooling of a semiconductor by 40 kelvin

Jun Zhang,Dehui Li,Renjie Chen,Qihua Xiong

DOI: https://doi.org/10.1038/nature11721

IF: 64.8

2013-01-01

Nature

Abstract:Net laser cooling from 290 kelvin to about 250 kelvin is achieved in semiconductor cadmium sulphide ‘nanobelts’ and attributed to strong coupling between excitons and longitudinal optical phonons.
The Game of Light & Heat: Cryogenic Optical Refrigeration and Athermal Lasers

Mansoor Sheik-Bahae,Jackson Kock,Alex R. Albrecht,Azzurra Volpi,Saeid Rostami,Mostafa Peysokhan,Richard I. Epstein,Markus P. Hehlen

DOI: https://doi.org/10.1109/cleo/europe-eqec52157.2021.9542375

2021-06-21

Abstract:Laser cooling of solids, also known as optical refrigeration, is based on anti-Stokes fluorescence upconversion where low-entropy laser light with photon energy less than mean fluorescence energy is absorbed followed by highly efficient fluorescence that carries heat and entropy away from the material [1],[2]. Much progress has been made recently by laser cooling high-purity Yb:YLF crystals to cryogenic temperatures (~90K) [3],[4]. More recently, Ho and Tm-doped crystals have also been cooled with cryogenic prospects [5]. On the applications front, optical refrigeration has been touted as the only promising technology for realizing an all-solid-state and vibration-free cryocooler. It was also shown that the cooling process when combined with stimulated emission can lead to radiation-balanced lasers (RBL) that are free from thermal instabilities and beam distortion [6]. We report on the most recent advances in this field which includes the realization of the first optical cryocooler prototype, and the progress towards its application in ultra-stable lasers for precision metrology. Furthermore, the feasibility of high-power "athermal" radiation-balanced lasers in disks, rods and fibers are discussed.
Solid-state laser refrigeration of a semiconductor optomechanical resonator

Anupum Pant,Xiaojing Xia,E. James Davis,Peter J. Pauzauskie

DOI: https://doi.org/10.48550/arXiv.1910.02153

2019-10-04

Applied Physics

Abstract:Photothermal heating represents a major constraint that limits the performance of many nanoscale optoelectronic and optomechanical devices including nanolasers, quantum optomechanical resonators, and integrated photonic circuits. Although radiation-pressure damping has been reported to cool an individual vibrational mode of an optomechanical resonator to its quantum ground state, to date the internal material temperature within an optomechanical resonator has not been reported to cool via laser excitation. Here we demonstrate the direct laser refrigeration of a semiconductor optomechanical resonator >20K below room temperature based on the emission of upconverted, anti-Stokes photoluminescence of trivalent ytterbium ions doped within a yttrium-lithium-fluoride (YLF) host crystal. Optically-refrigerating the lattice of a dielectric resonator has the potential to impact several fields including scanning probe microscopy, the sensing of weak forces, the measurement of atomic masses, and the development of radiation-balanced solid-state lasers. In addition, optically refrigerated resonators may be used in the future as a promising starting point to perform motional cooling for exploration of quantum effects at mesoscopic length scales,temperature control within integrated photonic devices, and solid-state laser refrigeration of quantum materials
Investigations on Coupling Between Performance and External Operational Conditions for a Semiconductor Refrigeration System

Yijian He,Chao Cao,Jie Wu,Guangming Chen

DOI: https://doi.org/10.1016/j.ijrefrig.2019.09.021

IF: 4.14

2020-01-01

International Journal of Refrigeration

Abstract:Semiconductor refrigeration utilizes Peltier effects to achieve cooling, and does not use any refrigerants. Due to its simple and compact structure, semiconductor refrigeration has become one of the most promising cooling technologies. However, as a semiconductor refrigeration system, the interactions among the main external factors that affect its performance are complicated. Based on experimental results and thermodynamic models, deeper insights are presented into semiconductor refrigeration in this study. Broader coupling between performance and main external parameters are analyzed, including the driving voltage of fans at both the hot and cold sides, and the working voltage of the semiconductor refrigeration chip. Optimal external parameters corresponding to a maximum COP and a maximum cooling capacity are obtained. For example, under the optimal working voltage of a semiconductor refrigeration chip with a fan driving voltage of 4 V at the hot side and 6 V at the cold side, Q(c,max) was increased by 60%, and was 326% higher than chips under 2 V and 10 V working voltages. Under the optimal fan driving voltage at the hot side with a 6 V fan driving voltage at the cold side and a 3 V working voltage of the chip, the maximum value of COP was respectively 140.3% and 104.3% larger than those with 0 V and 12 V fan driving voltages at the hot side. It is also found that the driving voltage of fans at the hot side has a greater influence on the optimal working voltage of a semiconductor refrigeration chip. This investigation could be applied in the optimization of the design and operational control of semiconductor refrigeration systems. (C) 2019 Elsevier Ltd and IIR. Allrights reserved.
Demonstration of Net Laser Cooling in a Semiconductor

Dehui Li,Jun Zhang,Qihua Xiong

DOI: https://doi.org/10.1142/s2251158x1300026x

2013-01-01

Asia Pacific Physics Newsletter

Abstract:Laser cooling of solids was first proposed by Pringsheim in 1929, more than 30 years before the invention of laser. With the advantages of being compact and free of vibration and cryogen, the laser cooling of solids shows very promising applications such as all solid-state cryocoolers and atheraml lasers. The basic principle of laser cooling in solids is based on the anti-Stokes luminescence, during which the emitted photons carry more energy than the incident photons. The thermal energy contained in lattice vibrations in solids is carried away by the emitted photons during the anti-Stokes luminescence processes resulting in the cooling of solids. To achieve net laser cooling, there are very strict requirements for materials: high external quantum efficiency, high crystalline quality and properly spaced energy levels. So far, the materials suitable for laser cooling are confined to rare-earth doped glasses or direct band gap semiconductors due to those special requirements.
Laser Cooling of Germanium Semiconductor Nanocrystals

Manuchehr Ebrahimi,Wei Sun,Amr S. Helmy,Nazir P. Kherani

DOI: https://doi.org/10.48550/arXiv.2101.04833

2021-01-13

Mesoscale and Nanoscale Physics

Abstract:Laser cooling of matter through anti-Stokes photoluminescence, where the emitted frequency of light exceeds that of the impinging laser by virtue of absorption of thermal vibrational energy, has been successfully realized in condensed media, and in particular with rare earth doped systems achieving sub-100K solid state optical refrigeration. Studies suggest that laser cooling in semiconductors has the potential of achieving temperatures down to ~10K and that its direct integration can usher unique high-performance nanostructured semiconductor devices. While laser cooling of nanostructured II-VI semiconductors has been reported recently, laser cooling of indirect bandgap semiconductors such as group IV silicon and germanium remains a major challenge. Here we report on the anomalous observation of dominant anti-Stokes photoluminescence in germanium nanocrystals. We attribute this result to the confluence of ultra-high purity nanocrystal germanium, generation of high density of electron-hole plasma, the inherent degeneracy of longitudinal and transverse optical phonons in non-polar indirect bandgap semiconductors, and commensurate spatial confinement effects. At high laser intensities, laser cooling with lattice temperature as low as ~50K is inferred.
Experimental minimum of condensed-phase optical refrigeration

Zhuoming Zhang,Yang Ding,Peter J. Pauzauskie,Mansoor Sheik-Bahae,Denis V. Seletskiy,Masaru Kuno

2024-08-06

Abstract:Since the first demonstration of optical refrigeration in a rare-earth-doped glass nearly 30 years ago, the nascent field of laser cooling solids has progressed significantly. It is now possible to demonstrate payload cooling to ~91 K using laser-excited ytterbium-doped fluoride crystals. Realizing lower temperatures, however, requires achieving ultrahigh purities in existing rare earth-doped crystals or establishing new cooling media. For the latter, semiconductors are an obvious choice given higher cooling power densities and predicted cooling floors as low as 10 K. This has stimulated a race to demonstrate the optical refrigeration of a semiconductor. It is therefore timely to systematize the necessary and sufficient experimental minimum criteria for reporting optical refrigeration results to elevate the reliability and reproducibility of current and future optical refrigeration claims. We distill an optical refrigeration Experimental Minimum (EM) that we propose will standardize the reporting of new cooling results. EM tenets fall into the following categories: demonstrations of explicit heating vs cooling, optical cooling metrics, thermodynamic consistency, and reliable temperature measurements. All optical refrigeration claims should demonstrate the above four criteria to ensure their reliability and verifiability. We further propose that the EM serve as a guide for reviewing literature claims in the field.

Optics
Charge and thermal modeling of a semiconductor-based optical refrigerator

Yurii V. Morozov,Shubin Zhang,Boldizsar Janko,Masaru Kuno

DOI: https://doi.org/10.1063/1.5049376

IF: 4

2018-10-29

Applied Physics Letters

Abstract:Despite multiple attempts to achieve optical refrigeration in very high (99.5%) external quantum efficiency (EQE) GaAs, no cooling has been observed to date. In this study, we investigate optical refrigeration in GaAs by numerically solving the transient drift-diffusion equation coupled to Poisson's equation. The charge carrier distributions we obtain, together with the heat diffusion equation, allow us to observe the spatial and temporal evolution of cooling/heating within GaAs. Our results indicate that maximum cooling occurs at a laser intensity different from that which maximizes EQE. An 11-fold difference in intensity exists with a corresponding 6-fold difference in cooling power. We ultimately find that samples suspended in vacuum using a 250 μm SiO2 fiber cool to 88 K, starting from room temperature. These results emphasize the critical importance of choosing an appropriate laser excitation intensity to achieve optical refrigeration along with minimizing the conductive heat load on the refrigerator. Furthermore, results of this study are applicable towards analyzing the optical response of other optoelectronic systems where accurate charge and/or heat diffusion modeling is critical.

physics, applied
Laser Cooling by Collisional Redistribution of Radiation

Ulrich Vogl,Martin Weitz

DOI: https://doi.org/10.1038/nature08203

2009-09-24

Abstract:The general idea that optical radiation may cool matter was put forward by Pringsheim already in 1929. Doppler cooling of dilute atomic gases is an extremely successful application of this concept, and more recently anti-Stokes cooling in multilevel systems has been explored, culminating in the optical refrigeration of solids. Collisional redistribution of radiation is a proposed different cooling mechanism that involves atomic two-level systems, though experimental investigations in gases with moderate density have so far not reached the cooling regime. Here we experimentally demonstrate laser cooling of an atomic gas based on collisional redistribution of radiation, using rubidium atoms subject to 230 bar of argon buffer gas pressure. The frequent collisions in the ultradense gas transiently shift a far red detuned laser beam into resonance, while spontaneous decay occurs close to the unperturbed atomic resonance frequency. During each excitation cycle, a kinetic energy of order of the thermal energy k_B T is extracted from the dense atomic sample. In a proof of principle experiment with a thermally non-isolated sample, we experimentally demonstrate relative cooling by 66 K. The cooled gas has a density of more than 10 orders of magnitude above the typical values in Doppler cooling experiments, and the cooling power reaches 87 mW. Future prospects of the demonstrated effect include studies of supercooling beyond the homogeneous nucleation temperature and optical chillers.

Quantum Gases,Atomic Physics
Using a laser to cool a semiconductor

Danhong Huang,T. Apostolova,P. M. Alsing,D. A. Cardimona

DOI: https://doi.org/10.48550/arXiv.cond-mat/0404367

2004-04-16

Abstract:A nonlocal energy-balance equation is derived for the optical absorption, photoluminescence and inelastic electron-phonon scattering, which determines the electron and hole temperatures for any given lattice temperature. The evolution of the lattice temperature is found to be determined by the difference between the power-loss density due to photoluminescence and the power-gain density due to optical absorption, as well as by the initial lattice temperature. We find that in addition to the expected decrease in the lattice temperature, the electron temperature also decreases with time. A laser-cooling power as high as 380 eV/s is predicted for the wide bandgap semiconductor AlN initially at room temperature when the pump-laser field is only 10 V/cm. Laser cooling is found to be more efficient for a large bandgap material, a weaker laser field, and a high initial lattice temperature. The laser-cooling rate then decreases as the lattice cools. The theory presented here provides quantitative predictions that can guide future experiments.

Other Condensed Matter
Research on Cooling System of High Power Semiconductor Laser Based on Thermoelectric Semiconductor Refrigerator

Ningning Dong,Jinjiang Cui,Jiangen Xu

DOI: https://doi.org/10.1109/eitce47263.2019.9094797

2019-10-01

Abstract:The cooling system of high power semiconductor laser based on thermoelectric semiconductor refrigerator is designed to solve the instability of output power of laser caused by temperature rise. Bi2Te3 thermoelectric cooler with maximum thermoelectric optimum coefficient at room temperature can accurately control the temperature in the range of 0.1 °C. It realizes the dual functions of refrigeration and heating by loading lower DC voltage at both ends and changing the direction of current. The laser works in the optimum temperature range, which can make the output of the laser safer and more stable. The experimental equipment is set up and the whole system is tested. The experimental results show that the temperature of heat sink increases with the increase of environmental temperature and tends to accelerate. The temperature of heat sink is relatively stable in the range of general medical treatment environmental temperature from 20°C to 30°C. The output power of high power laser based on thermoelectric semiconductor refrigerator is tested at a typical environmental temperature of 25°C. The deviation between the output power and the target power is less than 2%, which can meet the stable output of high power semiconductor laser treatment and ensure the stability and safety of laser output.
Solid-State Semiconductor Optical Cryocooler Based on CdS Nanobelts

Dehui Li,Jun Zhang,Xinjiang Wang,Baoling Huang,Qihua Xiong

DOI: https://doi.org/10.1021/nl501831f

IF: 10.8

2014-07-29

Nano Letters

Abstract:We demonstrate the laser cooling of silicon-on-insulator (SOI) substrate using CdS nanobelts. The local temperature change of the SOI substrate exactly beneath the CdS nanobelts is deduced from the ratio of the Stokes and anti-Stokes Raman intensities from the Si layer on the top of the SOI substrate. We have achieved a 30 and 20 K net cooling starting from 290 K under a 3.8 mW 514 nm and a 4.4 mW 532 nm pumping, respectively. In contrast, a laser heating effect has been observed pumped by 502 and 488 nm lasers. Theoretical analysis based on the general static heat conduction module in the Ansys program package is conducted, which agrees well with the experimental results. Our investigations demonstrate the laser cooling capability of an external thermal load, suggesting the applications of II-VI semiconductors in all-solid-state optical cryocoolers.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Optoelectronic cooling of mechanical modes in a semiconductor nanomembrane

K. Usami,A. Naesby,T. Bagci,B. Melholt Nielsen,J. Liu,S. Stobbe,P. Lodahl,E. S. Polzik

DOI: https://doi.org/10.48550/arXiv.1011.3974

2010-11-23

Abstract:Optical cavity cooling of mechanical resonators has recently become a research frontier. The cooling has been realized with a metal-coated silicon microlever via photo-thermal force and subsequently with dielectric objects via radiation pressure. Here we report cavity cooling with a crystalline semiconductor membrane via a new mechanism, in which the cooling force arises from the interaction between the photo-induced electron-hole pairs and the mechanical modes through the deformation potential coupling. The optoelectronic mechanism is so efficient as to cool a mode down to 4 K from room temperature with just 50 uW of light and a cavity with a finesse of 10 consisting of a standard mirror and the sub-wavelength-thick semiconductor membrane itself. The laser-cooled narrow-band phonon bath realized with semiconductor mechanical resonators may open up a new avenue for photonics and spintronics devices.

Mesoscale and Nanoscale Physics,Optics,Quantum Physics
Stimulated radiative laser cooling

Peter Muys

DOI: https://doi.org/10.1134/s11490-008-4012-4

2007-07-15

Abstract:Building a refrigerator based on the conversion of heat into optical energy is an ongoing engineering challenge. Under well-defined conditions, spontaneous anti-Stokes fluorescence of a dopant material in a host matrix is capable of lowering the host temperature. The fluorescence is conveying away a part of the thermal energy stored in the vibrational oscillations of the host lattice. In particular, applying this principle to the cooling of (solid-state) lasers opens up many potential device applications, especially in the domain of high-power lasers. In this paper, an alternative optical cooling scheme is outlined, leading to radiative cooling of solid-state lasers. It is based on converting the thermal energy stored in the host, into optical energy by means of a stimulated nonlinear process, rather than a spontaneous process. This should lead to better cooling efficiencies and a higher potential of applying the principle for device applications.

Optics

Breakthrough of optical refrigeration: Laser cools a semiconductor by 40 K

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

Laser Cooling Of A Semiconductor By 40 Kelvin: An Optical Refrigerator Based On Cadmium Sulfide Nanoribbons

Laser cooling of a semiconductor by 40 kelvin: an optical refrigerator based on cadmium sulfide nanoribbions

Laser cooling in semiconductors (Conference Presentation)

Laser Cooling of a Solid by 21 K Starting from Room Temperature

Laser cooling of a semiconductor by 40 kelvin

The Game of Light & Heat: Cryogenic Optical Refrigeration and Athermal Lasers

Solid-state laser refrigeration of a semiconductor optomechanical resonator

Investigations on Coupling Between Performance and External Operational Conditions for a Semiconductor Refrigeration System

Demonstration of Net Laser Cooling in a Semiconductor

Laser Cooling of Germanium Semiconductor Nanocrystals

Experimental minimum of condensed-phase optical refrigeration

Charge and thermal modeling of a semiconductor-based optical refrigerator

Laser Cooling by Collisional Redistribution of Radiation

Using a laser to cool a semiconductor

Research on Cooling System of High Power Semiconductor Laser Based on Thermoelectric Semiconductor Refrigerator

Solid-State Semiconductor Optical Cryocooler Based on CdS Nanobelts

Optoelectronic cooling of mechanical modes in a semiconductor nanomembrane

Stimulated radiative laser cooling