Abstract:In this work, based on the diffraction principle of reflective blazed grating, the structure size of the convex spherical blazed grating unit is determined, the machining accuracy of the convex spherical blazed grating is formulated, the effects of tool nose radius and Poisson burr on the diffraction efficiency of the convex spherical blazed grating are analyzed, and the performances of cutting convex gratings with microcrystalline aluminum RSA6061 and RSA6061+ chemically plated NiP for two workpiece materials are compared. A convex spherical blazed grating with a radius of curvature R = 41.104 mm, substrate diameter 14 mm, grating density 53.97 line/mm, and blaze angle of roughly 3.8° is turned by a four-axis ultra-precision machining system by adjustment of the cutting tool, workpiece material, and cutting parameters, as well as modification of the layouts of the blazed grating on the convex sphere. The results of the testing of convex spherical blazed grating elements in both layouts show that the size error of the grating period is close for both layouts, the size error of grating height is smaller in the equal-along-arc layout, the blaze angle error in the equal-along-projection layout is only 0.74%, and the average roughness of the blazed surface is less than 5 nm to meet the processing quality requirements of the reflective convex spherical blazed grating. The greater the blaze angle accuracy of the blazed grating, the higher its diffraction efficiency, so the grating element with an equal-along-projection layout has a higher diffraction efficiency than the grating element with an equal-along-arc layout. RSA6061+ chemically plated NiP material is superior to RSA6061 material in Poisson burr height and blazed surface roughness, which is more suitable for Offner-type imaging spectrometers in the spectral range 0.95–2.5 μm (SWIR).

Polynomial Expression for SAW Reflection by Aluminium Gratings on 128°Yx-Linbo3

Polynomial Expression For Saw Reflection By Aluminium Gratings On 128 Degrees Yx-Linbo3

Polynomial expression for SAW reflection by aluminium gratings on 128/spl deg/YX-LiNbO/sub 3/

Wide-angle Broadband Antireflection Coatings with Nano-Taper Hydrated Alumina Film.

Analysis of a Lloyd's Mirror Interferometer for Fabrication of Gratings

Analysis and Optimization of the Arrayed-Waveguide Grating Device with Total Internal Reflection Mirrors Based on Silicon-on-insulator Material

Analysis of Surface Acoustic Waves Obliquely Propagating under Metallic Gratings with Finite Thickness

Analytical Expression of Reflection-Spectrum Envelope for Sampled Gratings

A Research of Thickness Measurement of Nano-Porous Alumina Films Based on Reflection Spectrum

Determination of the Optical Constants of Solar-Control Amorphous Silicon Thin Films on Float Glass

Reflection and Transmission Analysis of Surface Acoustic Wave Devices

Model Parameter Extraction for Obliquely Propagating Surface Acoustic Waves in Infinitely Long Grating Structures

Modeling and Analysis of Lateral Propagation of Surface Acoustic Waves Including Coupling Between Different Waves.

The Research of a Method to Obtain the Optical Parameters of Semiconductor Films

Effects of Dielectric Overlay Upon Surface Acoustic Wave Propagation under Metallic Grating Structure

Surface acoustic wave scattering of an electrode or a groove

Polarization Properties of Subwavelength Metallic Gratings in Visible Light Band

Accurate Analytical Expression for Reflection-Peak Wavelengths of Sampled Bragg Grating

An Accurate Solution to Periodic Grating Structure Scattering Using Nystrom Method with an Over-determined Testing Scheme

Design and Fabrication of 1300-Line/mm Polarization-Independent Reflection Gratings for Spectral Beam Combining

Ultra-Precision Cutting and Characterization of Reflective Convex Spherical Blazed Grating Elements