Abstract:The precise extraction of a thin slice (lamellae) from nano electronic devices using a focused ion beam (FIB) is crucial for transmission electron microscopy analysis, but it remains a challenge for 100 nm and beyond scale device components. In this study, we introduce a new method that utilizes the device's own features as markers during FIB thinning process by continuously monitoring the intermediate structures with secondary electron scanning electron microscopy (SE-SEM) imaging. This allows for the targeted extraction of the desired device component with high precision. We successfully demonstrate the effectiveness of this approach by extracting lamellae from 100 nm length channel in arrayed carbon nanotube film field-effect transistors using FIB lift-out. Lay Description: In today's semiconductor industry, nanoscale and even atomic-scale investigation of the processing and product quality of nanodevices is essential, for which the combination of focused ion beam (FIB) and transmission electron microscope (TEM) is a commonly used tool. A key requirement is to ensure the TEM examined device components are precisely defined during the FIB process, which is becoming a challenge particularly for 100 nm scale (and beyond) nanodevices. In this study, the authors propose and further demonstrate a self-marked method that enables the feasibility of extracting sub-100 nm components of nanodevices (using the state-of-the art carbon nanotube transistor as a demo) using FIB, by continuously monitoring intermediate structures with secondary electron scanning electron microscopy (SE-SEM) imaging. This article is protected by copyright. All rights reserved.

Fabrication of SAW Devices Using SEM-based Electron Beam Lithography and Lift-off Technique for Lab Use

Femtosecond Laser Micromachining of the Mask for Acoustofluidic Device Preparation

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Self-marked preparation of site-specific transmission electron microscope lamellae of nanodevices using focusing ion beam technique.

Fabrication of SAW Interdigitated Transducer by X-ray Lithography and Metal Lift-off

Standing Surface Acoustic Wave-Assisted Fabrication of Region-Selective Microstructures Via User-Defined Waveguides.

Fabrication of Si / Inlaid-IDT / LiNbO 3 Structure for Acoustic Boundary Wave Devices

A Self-Aligned Mask-Free Fabrication Process for High-Frequency ZnO Array Transducer

Direct atomic fabrication and dopant positioning in Si using electron beams with active real time image-based feedback

Method for Fabricating Micro/Nanostructures Via Scanning Probe Microscope and Anisotropic Wet Etching

Fabrication of a high aspect ratio thick silicon wafer mold and electroplating using flipchip bonding for MEMS applications

Fabrication of Metal Nanoscale Devices on Insulating Membranes by High-Resolution Atom Ablation

Fabrication of Microresonators by Using Photoresist Developer As Etchant*

Low Cost and High‐Aspect Ratio Micro/Nano Device Fabrication by Using Innovative Metal‐Assisted Chemical Etching Method

Aerosol jet printing of surface acoustic wave microfluidic devices

More-than-Moore Microacoustics: A Scalable Fabrication Process for Suspended Lamb Wave Resonators

Fabrication of polydimethylsiloxane nanofluidic chips under AFM tip-based nanomilling process

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers

A Surface Micromachining Process for Suspended RF-MEMS Applications Using Porous Silicon

Application of Lift-Off Process in Fabricating Nanoimprint Stamp

Zno Based Saw and Fbar Devices for Lab-On-A Chip Applications