Abstract:Recently, the interconnection bandwidth of the data center is rapidly increasing. To satisfy the requirement for the high-performance data center, a 4-channel 2.5D silicon photonic transmitter is proposed and the packaging structure could increase the high-density scalability of the architecture for 1.6T3.2T co-packaging optics (CPO) module. The electrical driver and silicon photonic Mach-Zehnder modulator (MZM) are mounted to the silicon interposer by the micro-bumps. Meanwhile, the silicon interposer is mounted to the low temperature co-fired ceramic by the solder balls. The 2.5D transmitter is assembled to the motherboard by the high-speed ball grid array (BGA) connector to make it convenient to be replaced. The electrical optimization is implemented to make the insertion loss of the whole passive link within 1.55 dB under 40 GHz, which ensures the transmitter with the socket transmit the clear simulated eye diagram at 64 Gbps PAM4 rate per channel. Moreover, the thermal evaluation is performed, which includes the heat- dissipation evaluation and the thermal-induced impact on the edge light coupling. Finally, the substrates in the 2.5D transmitter are fabricated and the transmitter is realized by the improved assembly method. By the verification of the measurement, the 2.5D transmitter we proposed could work at 64 Gbps PAM4 signal transmission rate per channel with the 6pJbit power consumption. Regardless of the bandwidth of the electronic integrated circuit (EIC)MZM and the BGA connector, based on the simulation electrical bandwidth, it is potential for realizing 100 Gbps PAM4 signal transmission.

Chip-package co-design for high-speed transmitter in serial links application

Robustness Enhancement Through Chip-Package Co-Design for High-Speed Electronics

Methods and designs for improving the signal integrity for 3D electrical interconnects in high performance IC packaging

D-band CMOS Transmitter and Receiver for Multi-Giga-bit/sec Wireless Data Link

A 2 GS/s 14-Bit Current-Steering DAC in 65 Nm CMOS Technology for Wireless Transmitter

High-speed serial interconnect transceiver: Applications and design

SIGNAL PROPAGATION IN HIGH SPEED DIFFERENTIAL TRANSMISSION LINE USING PARALLELIZED FINITE-DIFFERENCE TIME-DOMAIN METHOD

Design of a 1.12 Gb/s 11.3 Mw Low-Voltage Differential Signaling Transmitter

Chip Package Co-design of 5ghz RF Receiver Front-End Using Multichip Module Technology

A programmable pre-emphasis technique with combined RLC source degeneration for high-speed serial link transmitters

Chip-Package and Antenna Co-Design of a Tunable UWB Transmitter in System-on-Package with On-Chip versus Off-Chip Passives

A Receiver Circuit Design for High Speed On-Chip Global Interconnect

Transmitter for high-speed serial data communication

A 70 Mw 25 Gb/s Quarter-Rate SerDes Transmitter and Receiver Chipset with 40 Db of Equalization in 65 Nm CMOS Technology

Design and Realization of Multi-Channel and High-Bandwidth 2.5D Transmitter Integrated With Silicon Photonic MZM

An Efficient 90nm Technology-Node GHz Transceiver of On-Chip Global Interconnect.

A 10gb/s Compact Low-Power Serial I/O with DFE-IIR Equalization in 65nm CMOS

A 40-Gb/s Quarter-Rate SerDes Transmitter and Receiver Chipset in 65-Nm CMOS

A 26-Gb/s 140-Ghz OOK CMOS Transmitter and Receiver Chipset for High-Speed Wireless and Dielectric Waveguide Communication

A 4-40 Gb/s PAM-4 Transmitter with a Hybrid Driver in 65 Nm CMOS Technology

Design Trade-Offs For Digitally Equalized Cmos Rf Transmitter