Abstract:This paper discusses two antennas monolithically integrated on-chip to be used respectively for wireless powering and UWB transmission of a tag designed and fabricated in 0.18-mu m CMOS technology. A multiturn loop-dipole structure with inductive and resistive stubs is chosen for both antennas. Using these on-chip antennas, the chip employs asymmetric communication links: at downlink, the tag captures the required supply wirelessly from the received RF signal transmitted by a reader and, for the uplink, ultra-wideband impulse-radio (UWB-IR), in the 3.1-10.6-GHz band, is employed instead of backscattering to achieve extremely low power and a high data rate up to 1 Mb/s. At downlink with the on-chip power-scavenging antenna and power-management unit circuitry properly designed, 7.5-cm powering distance has been achieved, which is a huge improvement in terms of operation distance compared with other reported tags with on-chip antenna. Also, 7-cm operating distance is achieved with the implemented on-chip UWB antenna. The tag can be powered up at all the three ISM bands of 915 MHz and 2.45 GHz, with off-chip antennas, and 5.8 GHz with the integrated on-chip antenna. The tag receives its clock and the commands wirelessly through the modulated RF powering-up signal. Measurement results show that the tag can operate up to 1 Mb/s data rate with a minimum input power of -19.41 dBm at 915-MHz band, corresponding to 15.7 m of operation range with an off-chip 0-dB gain antenna. This is a great improvement compared with conventional passive RFIDs in term of data rate and operation distance. The power consumption of the chip is measured to be just 16.6 mu W at the clock frequency of 10 MHz at 1.2-V supply. In addition, in this paper, for the first time, the radiation pattern of an on-chip antenna at such a frequency is measured. The measurement shows that the antenna has an almost omnidirectional radiation pattern so that the chip's performance is less direction-dependent.

Chip-Package and Antenna Co-Design of a Tunable UWB Transmitter in System-on-Package with On-Chip versus Off-Chip Passives

Low Power Tunable Cmos I-Uwb Transmitter Design

An Innovative Semi-Uwb Passive Transponder for Wireless Sensor and Rfid Applications

Chip Package Co-design of 5ghz RF Receiver Front-End Using Multichip Module Technology

Chip-package co-design of a concurrent LNA in system-on-package for multi-band radio applications

Chip-package co-design of common emitter LNA in system-on-package with on-chip versus off-chip passive component analysis

Far-Field On-Chip Antennas Monolithically Integrated In A Wireless-Powered 5.8-Ghz Downlink/Uwb Uplink Rfid Tag In 0.18-Mu M Standard Cmos

Packaging Solution for a Millimeter-Wave System-on-Chip Radar

A Fully Integrated BPSK Amplitude and Spectrum Tunable Transmitter for IR-UWB System

Design and Implementation of a Dual-Band RF SiP Module Based on Package-on-Package Technology

An RF Transmitter Front-End Implementation in 0.18&#x03bc;m CMOS for OFDM-UWB

A 9.2pj/pulse UWB-IR Transmitter with Tunable Amplitude for Wireless Sensor Tags in 0.18um CMOS

Fully Integrated 1.2 Pj/p UWB Transmitter with On-Chip Antenna for Wireless Identification

UWB Radio Module Design for Wireless Intelligent Systems-From Specification to Implementation

Chip-package co-design for high-speed transmitter in serial links application

A 2.4ghz Low Power Wireless Transceiver Analog Front-End for Endoscopy Capsule System

On-chip Versus Off-Chip Passives Analysis in Radio and Mixed-Signal System-on-package Design

SiP-based 60ghz 4&#x00d7;4 Antenna Array with 90nm CMOS OOK Modulator in LTCC

A Low Power Interference Robust IR-UWB Transceiver SoC for WBAN Applications

An Rf Transmitter Front-End Implementation In 0.18 Mu M Cmos For Ofdm-Uwb

Design And Implementation Of A Compact Dual-Band Rf System-In-Package Module