Abstract:Capacitive sensors are efficient tools for biophysical force measurement, which is essential for the exploration of cellular behavior. However, attention has been rarely given on the influences of external mechanical and internal electrical interferences on capacitive sensors. In this work, a bionic swallow structure design norm was developed for mechanical decoupling, and the influences of structural parameters on mechanical behavior were fully analyzed and optimized. A bionic feather comb distribution strategy and a portable readout circuit were proposed for eliminating electrostatic interferences. Electrostatic instability was evaluated, and electrostatic decoupling performance was verified on the basis of a novel measurement method utilizing four complementary comb arrays and application-specific integrated circuit readouts. An electrostatic pulling experiment showed that the bionic swallow structure hardly moved by 0.770 nm, and the measurement error was less than 0.009% for the area-variant sensor and 1.118% for the gap-variant sensor, which can be easily compensated in readouts. The proposed sensor also exhibited high resistance against electrostatic rotation, and the resulting measurement error dropped below 0.751%. The rotation interferences were less than 0.330 nm and (1.829 × 10 −7 )°, which were 35 times smaller than those of the traditional differential one. Based on the proposed bionic decoupling method, the fabricated sensor exhibited overwhelming capacitive sensitivity values of 7.078 and 1.473 pF/μm for gap-variant and area-variant devices, respectively, which were the highest among the current devices. High immunity to mechanical disturbances was maintained simultaneously, i.e., less than 0.369% and 0.058% of the sensor outputs for the gap-variant and area-variant devices, respectively, indicating its great performance improvements over existing devices and feasibility in ultralow biomedical force measurement.

An electrometric method to measure the mechanical parameters of MEMS devices

Electrometric Method for Measuring the Mechanical Parameters of a Comb-Finger Micro-Mechanical Accelerometer

The Research of Self-Sensing Magnetostrictive Actuator Based on Parameter Identification

Multi-physics Coupling Field Finite Element Analysis on Giant Magnetostrictive Materials Smart Component

DETERMINATION OF MECHANICAL BEHAVIOR OF MEMS MATERIALS

Mems/Nems Mechanical Characterization on Different Thin - Film Materials by Scanning along Micro-Machined Cantilevers

Simplified Method of Microcontact Force Measurement by Using Micropressure Sensor

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

Design and Realization of Comb-Finger Micromechanical Accelerometer

Measurement of mechanical properties for MEMS materials

Measuring the Mechanical Properties of Micro-Cantilever Sensors

Method for QCM Resonator Device Equivalent Circuit Parameter Extraction and Electrode Quality Assessment

Electromechanical Analysis of Microelectromechanical Structures and Dynamic Simulations of Laterally Vibratory Microgyroscope

An Impact Velocity Measurement System for Electromagnetic Forming Process

Investigation on Surface Forces Measurement Using Force-Balanced MEMS Sensor

Mechanical characterization of biocompatible thin film materials by scanning along micro-machined cantilevers for micro-/nano-system

A bionic approach for the mechanical and electrical decoupling of an MEMS capacitive sensor in ultralow force measurement

Miniaturized electromechanical devices for the characterization of the biomechanics of deep tissue

RESEARCH ON COUPLED ELECTRO-MECHANICAL ANALYSIS AND APPLICATION FOR TYPICAL COMPONENTS IN MEMS

A New Method to Measure Adhesion and Surface Forces Using A Closed-Loop Accelerometer

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error