Abstract:With the development of the vehicle and Diesel engine technology, the selective catalytic reduction (SCR) technology has been paid more attention recently, which is one of the most effective approaches for reducing the nitrogen oxides (NOx) emissions of Diesel engine exhaust. The control strategy of the ammonia coverage ratio of SCR catalyst is vitally important, which directly influences the NOx reduction efficiency and ammonia leakage. To solve such a challenging task, some assumptions are given firstly based on the understanding of the SCR nonlinear dynamic characteristics, and then the SCR nonlinear model is established by the Continuous Stirred Tank Reactor (SCTR) method. The ammonia storage characteristics are studied based on the established model. Then, the stability and observability of the SCR model are analyzed. For the unmeasurable ammonia coverage ratio and storage capacity of catalyst, a state observer based on the extended Kalman filter (EKF) is proposed. The structure of the closed-loop control system and the corresponding model predictive control (MPC) are designed to improve the robustness of the closed-loop system. The SCR test bench performed on the European Steady Cycle (ESC) and European Transient Cycle (ETC) operating condition is performed for the experimental validation of the control strategy. Meanwhile, a comparison between the proposed method and a feedforward control strategy based on MAP is provided to demonstrate the advantage of this closed-loop feedback control method based on EKF and MPC. The experimental results show that the closed-loop control system can effectively reduce the Diesel NOx emissions and avoid the secondary pollution caused by the ammonia leakage which is applicable to the actual Diesel SCR aftertreatment system.

Design of selective catalytic reduction systems controller for diesel engine using triple-step nonlinear method

Modelling and control of urea-SCR systems through the triple-step non-linear method in consideration of time-varying parameters and reference dynamics

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Urea-SCR Process Control for Diesel Engine Using Feedforward-Feedback Nonlinear Method

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

A fuzzy logic urea dosage controller design for two-cell selective catalytic reduction systems

Adrc Based Cascade Controller Design for Urea Selective Catalytic Reduction System

Model-Based Estimation and Control System Development in a Urea-SCR Aftertreatment System

Model Predictive Control: A Unified Approach for Urea-Based SCR Systems

Luenberger-Sliding Mode Observer Based Backstepping Control for the SCR System in a Diesel Engine

Compound Control Strategy Based on Active Disturbance Rejection for Selected Catalytic Reduction Systems

Nonlinear Model Predictive Control of Integrated Diesel Engine and Selective Catalytic Reduction System for Simultaneous Fuel Economy Improvement and Emissions Reduction

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Ammonia coverage ratio control of a novel two-cell SCR-DeNOX system configuration based on IA-ISMC

Study of Control Strategy for Urea-SCR After-Treatment System of Heavy Duty Diesel Engine

Closed-Loop Control Strategy and State Estimator for Diesel Engine SCR After-Treatment System

Sequential Optimization of Eco-Driving Taking into Account Fuel Economy and Emissions.

Zonal Control for Selective Catalytic Reduction System Using a Model-Based Multi-Objective Genetic Algorithm

Adaptive Control of Two-Cell Selective Catalytic Reduction Systems

Development and verification of model predictive control strategy for selective catalytic reduction with rapid prototyping

Model-Based Closed-Loop Control Strategy of Diesel Urea-SCR System Simulation