Abstract:In pursuit of carbon neutrality, zero-carbon ammonia fuel emerges as a viable solution for reducing energy carbon emissions. Integrating ammonia into diesel engines, by partially substituting it for diesel, presents a recognized method for mitigating carbon emissions. However, introducing ammonia as a fuel adds an alternative source of elemental nitrogen, in addition to air, thereby increasing the formation pathways for nitrogen-based pollutants and altering emission characteristics compared to traditional engines. To enhance understanding of these emission characteristics within the ammonia-diesel dual-fuel system, this study employs a validated threedimensional (3D) computational fluid dynamics (CFD) model to meticulously analyze the formation and evolution of in-cylinder nitrogen-based pollutants. The research highlights that, in the ammonia-n-heptane binary fuel chemical mechanism, addressing fuel- and air-borne nitrogen separately effectively segregates emissions derived from these two sources, particularly during the diffusion combustion phase. This segregation reveals that the formation of thermal nitrogen oxides (NOx) (including nitric oxide (NO) and nitrogen dioxide (NO2)) 2 )) is delayed relative to pollutants originating from fuel nitrogen, with the formation rate of thermal NOx being contingent on the duration nitrogen remains at elevated temperatures. Additionally, thermal NOx predominantly originates at the periphery of the diffusion flame, whereas fuel-derived NOx is more evenly dispersed within the spray combustion zone, albeit with higher concentrations at the flame edge. Moreover, nitrous oxide (N2O) 2 O) formation, as a partial oxidation product of ammonia, primarily occurs at the diffusion flame edge, where ammonia (NH3) 3 ) oxidation is accompanied by diesel combustion. However, by distinguishing between fuel- and air-borne nitrogen, this approach prevents thermal NOx from interacting with fuel-derived amino groups, thereby altering the distribution of nitrogen-based pollutants during the late oxidation stage. Nevertheless, this methodological separation can help deepen understanding of nitrogen-based pollutant emissions, laying the groundwork for the development and optimization of control strategies for these pollutants.

Zonal Control for Selective Catalytic Reduction System Using a Model-Based Multi-Objective Genetic Algorithm

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Optimization of the ammonia coverage ratio references in diesel engine two-can selective catalytic reduction systems via nonlinear model predictive control

Compound Control Strategy Based on Active Disturbance Rejection for Selected Catalytic Reduction Systems

Design of selective catalytic reduction systems controller for diesel engine using triple-step nonlinear method

Urea injection control strategy in urea-selective catalytic reduction for heavy-duty diesel engine under transient process

Model-based NH3 Adaptation Method for SCR Control

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Application of an Improved State Feedback Control in the Selective Catalytic Reduction Denitrification Systems of Coal Power Units Under Variable Load Conditions

Nonlinear Model Predictive Control of Integrated Diesel Engine and Selective Catalytic Reduction System for Simultaneous Fuel Economy Improvement and Emissions Reduction

Ammonia coverage ratio control of a novel two-cell SCR-DeNOX system configuration based on IA-ISMC

Nonlinear model predictive control applied to multivariable thermal and chemical control of selective catalytic reduction aftertreatment

Model-Based Estimation and Control System Development in a Urea-SCR Aftertreatment System

Cycle-based Optimal Emission Control of Diesel Engine Selective Catalyst Reduction Systems

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

A fuzzy logic urea dosage controller design for two-cell selective catalytic reduction systems

Simulation Study of Ammonia Storage Characteristics of Selective Catalytic Reduction for Diesel Engines

Multi-parameter Co-Optimization for NOx Emissions Control from Waste Incinerators Based on Data-Driven Model and Improved Particle Swarm Optimization

Influence of Urea-SCR System Parameters on NOx Conversion Rate and Liquid Film

Applying Separate Treatment of Fuel- and Air-Borne Nitrogen to Enhance Understanding of In-Cylinder Nitrogen-Based Pollutants Formation and Evolution in Ammonia-Diesel Dual Fuel Engines