Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Low Loss/large Tolerance Mode Converter Between SiN Waveguide and Cleaved Single Mode Fiber.

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Low-loss mode converter for coupling light into slotted photonic crystal waveguide

Low-loss and Fabrication Tolerant Silicon Mode-Order Converters Based on Novel Compact Tapers.

Mode converter based on an inverse taper for multimode silicon nanophotonic integrated circuits.

Bilevel Mode Converter Between A Silicon Nanowire Waveguide and A Larger Waveguide

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

SiN-SOI Multilayer Platform for Prospective Applications at 2 Μm

Design of Silicon Photonic Wavelength Conversion Chip for Mode-division Multiplexing Signals

A Theoretical Sub-0.1 Db Loss Single Mode Fiber-To-Chip Edge Coupler for Silicon Nitride Waveguides

Diffractive Optical Element for Coupling Semiconductor Laser Diode to Single-Mode Fiber

Efficient Adiabatic Silicon-on-insulator Waveguide Taper

Ultra-compact Dual-Mode Mode-Size Converter for Silicon Photonic Few-Mode Fiber Interfaces.

Design of a Polarization Insensitive Mode-Size Converter Worked at 800 Nm Wavelength with Simple CMOS Process

Silicon Two-Mode Multi/demultiplexer Based on Tapered Couplers

Menis Siob Design For Integrated Transceiver Application

Low-cost and high-efficiency single-mode-fiber interfaces to silicon photonic circuits

Highly Efficient Mode Converter for Coupling Light into Wide Slot Photonic Crystal Waveguide

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

Compact Silicon Waveguide Mode Converter Employing Dielectric Metasurface Structure

High Efficiency Grating Coupler for Coupling Between Single-Mode Fiber and SOI Waveguides