Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Ultra-compact Dual-Mode Mode-Size Converter for Silicon Photonic Few-Mode Fiber Interfaces.

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Ultra-compact and Ultra-Broadband Arbitrary-Order Silicon Photonic Multi-Mode Converter Designed by an Intelligent Algorithm.

Design of Silicon Photonic Wavelength Conversion Chip for Mode-division Multiplexing Signals

Correction To: an Ultra-Compact Polarization-Insensitive Slot-Strip Mode Converter

Mode Couplers and Converters Based on Dual-Core Hollow-Core Photonic Bandgap Fiber

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

Design of a Polarization Insensitive Mode-Size Converter Worked at 800 Nm Wavelength with Simple CMOS Process

Ultra-compact and efficient integrated multichannel mode multiplexer in silicon for few-mode fibers

Ultra-compact Hybrid Plasmonic Mode Convertor Based on Unidirectional Eigenmode Expansion.

Ultra‐Compact and Ultra‐Broadband Guided‐Mode Exchangers on Silicon

Topologically-optimized On-Chip Metamaterials for Ultra-Short-range Light Focusing and Mode-Size Conversion

Three-port Mode-(De)interleaver in Silicon Waveguide

Multi-mode conversion via two-dimensional refractive-index perturbation on a silicon waveguide

Ultra-Compact Reflective Waveguide Mode Converter Based on Slanted-Surface and Subwavelength Metamaterials

Fabrication of a 3D mode size converter for efficient edge coupling in photonic integrated circuits

Ultra-broadband and low-modal-crosstalk mode multiplexer based on cascaded vertical directional couplers formed by adiabatic-tapered waveguides without mode conversion

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.