Highly Efficient Mode Converter for Coupling Light into Wide Slot Photonic Crystal Waveguide

Xingyu Zhang,Harish Subbaraman,Amir Hosseini,Ray T. Chen
DOI: https://doi.org/10.1364/OE.22.020678
2014-08-15
Abstract:We design, fabricate and experimentally demonstrate a highly efficient adiabatic mode converter for coupling light into a silicon slot waveguide with a slot width as large as 320nm. This strip-to-slot mode converter is optimized to provide a measured insertion loss as low as 0.08dB. Our mode converter provides 0.1dB lower loss compared to a conventional V-shape mode converter. This mode converter is used to couple light into and out of a 320nm slot photonic crystal waveguide, and it is experimentally shown to improve the coupling efficiency up to 3.5dB compared to the V-shape mode converter, over the slow-light wavelength region.
Optics
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to improve the optical coupling efficiency, especially when coupling light into a slot photonic crystal waveguide (SPCW) with a relatively large width. Specifically, the authors designed, fabricated and experimentally demonstrated an efficient adiabatic mode converter for coupling light into a silicon - slot waveguide, where the slot width can reach 320 nanometers. This mode converter is designed to provide an insertion loss as low as 0.08 dB, which is 0.1 dB lower than that of the traditional V - shaped mode converter. In addition, this mode converter was also used to couple light into a photonic crystal waveguide with a 320 - nanometer slot width, and the coupling efficiency in the slow - light wavelength region was improved by 3.5 dB compared with the V - shaped mode converter. The paper mentions that although using electro - optic polymers in wide - slot waveguides can significantly improve device performance, the effective coupling between strip waveguides and slot waveguides is challenging due to mode mismatch. To this end, the authors explored a new adiabatic mode converter to solve the problem of non - zero tip width of the traditional V - shaped mode converter caused by lithography limitations, thereby reducing the discontinuity of the central mode distribution and further reducing the total insertion loss. By optimizing the design of this adiabatic mode converter, the authors not only achieved effective optical coupling from a single - mode strip waveguide to a wide - slot waveguide, but also demonstrated the application of this mode converter in coupling light into and out of a 300 - micrometer - long electro - optic polymer - filled slot photonic crystal waveguide, further verifying its high efficiency. These achievements are of great significance for applications such as photonic integrated circuits, optical interconnections, electro - optic modulation and electromagnetic field sensing.