Abstract:An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li–Etsion–Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

Experimental Investigation and Numerical Simulation on the Role of Sphere Indenter in Measuring Contact Resistance of Flat Rivets.

Numerical Simulation and Experimental Verification for Contact Spot Temperature and Electrical Contact Resistance of Rivet Contacts

A New Automated Test Equipment for Measuring Electrical Contact Resistance of Real Size Rivets

A Friction Evaluation Method Based on Barrel Compression Test

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Experiment and Numerical Simulations of a Slug Rivet Installation Process Based on Different Modeling Methods

Research on Temperature Rise and Contact Resistance of Rivets Contacts

High-Throughput Measurement of the Contact Resistance of Metal Electrode Materials and Uncertainty Estimation

Resistive-nanoindentation on gold: Experiments and modeling of the electrical contact resistance

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Experimental Research on Fretting Wear Characteristics of Au-Plated Copper Contacts Used in Electrical Connectors

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

Influence of Different Material Properties on Cold Working of AgSnO2 Electrical Contact Material

Multi-filed Coupling Numerical Simulation and Experimental Investigation in Electromagnetic Riveting

Novel method for measuring surface residual stress using flat-ended cylindrical indentation

Electrical Contact Resistance of Coated Spherical Contacts

Status of Test Methods for Contact Materials Fretting Wear Characteristics

Ultrasonic measurement of contact stress at metal-to-metal interface based on a real rough profile through modeling and experiment

Contact stiffness of the multi-indenter contact interface

Measurement of real contact area for rough metal surfaces and the distinction of contribution from elasticity and plasticity

Experimental and Numerical Investigations on the Impact of Surface Conditions on Self-Piercing Riveted Joint Quality