Abstract:Gold-plated copper alloy electrical contact materials are widely used in electrical interconnection to meet the requirements of high quality and high reliability for aviation and aerospace engineering. Not much is known about the fretting failure mechanism of such materials when placed in an environment with a high-frequency vibration. This paper investigates the fretting wear and corrosion behavior of gold-plated copper alloy contacts experimentally under different vibration amplitude and frequency combinations. Three typical degradation features are summarized. Relative surface morphology, element distribution, and wear track of worn surfaces are also analyzed. The fretting map, which can discriminate the fretting regimes with vibration amplitude and frequency combinations, is presented. The map can be clearly divided into the infinite electrical contact life zone, the oxidation-dominated failure zone, and the transient unstable conductivity failure zone. The appropriate sliding velocity is the critical condition for the sharply degradation of contact resistance after the gold coating has worn out. The results show that the dynamic contact resistance is significantly influenced by the coarser and irregular profile features of wear track induced by higher sliding speed, as well as the high resistive oxides debris or oxide metal mixture.

Experimental Research on Fretting Wear Characteristics of Au-Plated Copper Contacts Used in Electrical Connectors

Fretting Behavior of Au Plated Copper Contacts Induced by High Frequency Vibration

Research on Fretting Regimes of Gold-Plated Copper Alloy Electrical Contact Material under Different Vibration Amplitude and Frequency Combinations

Status of Test Methods for Contact Materials Fretting Wear Characteristics

Understanding the Fretting Failure Mechanisms in Gold-Plated Contact Materials

Mechanical behavior and fatigue life estimation on fretting wear for micro-rectangular electrical connector.

Fretting Behavior of Gold-Plated Contact Materials Used in High-Frequency Vibration and Different Temperature Environment

Review of Fretting Wear for Electrical Connector

Fretting On Silver-Plated Copper Contact Terminals Of Rectangular Electrical Connector Assemblies

Effects of Current Load on Wear and Fretting Corrosion of Gold-Plated Electrical Contacts

Investigation on Melt Erosion Phenomenon of Heavy-Duty Connectors under Fretting Conditions

A comparative study on the electrical contact behavior of CuZn40 and AgCu10 alloys under fretting wear: Effect of current load

Fretting wear behavior of brass/copper-graphite composites as a contactor material under electrical contact

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

Effects of Current Load on Wear and Melt Erosion of Electrical Contacts under Fretting Condition

Preliminary Study of Electrical Contact Behaviors of Au-Plated Material at Super Low Making/Breaking Velocity

Experimental Investigation and Numerical Simulation on the Role of Sphere Indenter in Measuring Contact Resistance of Flat Rivets.

Study of fretting wear mechanisms of complete contacts

AC Signal Modulation on Electrical Contacts Due to Vibration Induced Fretting Corrosion

Finite Element Simulation of Fretting Wear Behaviors under the Ball-on-flat Contact Configuration

Electrical contact resistance endurance of AgNi10 alloys under fretting wear: Experiment and numerical prediction