Abstract:Vertically aligned carbon nanotube arrays(VACNTs) exhibit high aspect-ratios and excellent mechanical strength, and have attracted attention in the field of gecko-inspired dry adhesives. However, the poor interfacial bonding between the silicon substrate and the VACNTs, the hard and brittle silicon substrate which is suitable for the growth of VACNTs in chemical vapor deposition(CVD) technique limit the development and application of VACNTs as the gecko-inspired dry adhesive. To overcome these limitations we present a simple and cost-effective heating transfer method without other media-assisted. We combine this with thermal oxidation detachment to transfer the grown VACNTs onto flexible polycarbonate(PC) substrates. The transfer process provides two different VACNTs morphologies; a curly entangled segment in the bottom and an aligning end segment in the top. The bottom transfer maintains the top morphology of the pristine VACNTs, which differs from the flip-over process known as top transfer. This transfer process results in a double transferred VACNTs structure which is a new type of dry adhesive. By optimizing the transfer process, the interfacial bonding force between the VACNTs and PC substrates is nearly three times stronger than that of grown VACNTs on silicon substrates at 250°C. The shear adhesion strengths of the bottom- and top-transferred VACNTs were tested and analyzed. Then, the shear adhesion strength of the transferred VACNTs were tested and analyzed according to the difference between the morphology and the degree of graphitization on the top of VACNTs after the top/bottom transfer methods. The shear adhesion strength of the transferred VACNTs increased with the normal preload. The adhesion strength of the bottom-transferred VACNTs was approximately 5 N/cm2, whereas that of the top-transferred VACNTs was 2.8 N/cm2 under a 16 N/cm2 normal preload force. The bottom-transferred VACNTs showed better adhesion because of the increasing contact area and higher degree of graphitization on the top of the structure according to scanning electron microscope and Raman spectra. Our transfer method is nondestructive, fast and suitable for VACNTs with a height greater than 200 um. Moreover, this method is not restricted by the area of the VACNTs, and thus can improve their integrity and flexibility, and increase their application as gecko-inspired dry adhesives.

Wafer-Scale Transfer Of Vertically Aligned Carbon Nanotube Arrays

Transfer of Vertically Aligned Carbon Nanotube Arrays Onto Flexible Substrate for Dry Adhesive and Its Properties

High-Quality Vertically Aligned Carbon Nanotubes for Applications as Thermal Interface Materials

Quality Control of Vertically Aligned Carbon Nanotubes Grown by Chemical Vapor Deposition

Transferable thin films of pristine carbon nanotubes.

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Vertically aligned carbon nanotubes grown on reduced graphene oxide as high-performance thermal interface materials

Alcohol-Assisted Rapid Growth of Vertically Aligned Carbon Nanotube Arrays

Ice-Assisted Transfer of Carbon Nanotube Arrays

Growth Mechanism and Kinetics of Vertically Aligned Carbon Nanotube Arrays

Facile Synthesis of High Density Carbon Nanotube Array by a Deposition-Growth-densification Process

Crack-free and Scalable Transfer of Carbon Nanotube Arrays into Flexible and Highly Thermal Conductive Composite Film.

Nanotransfer Printing for Synthesis of Vertically Aligned Carbon Nanotubes with Enhanced Atomic Penetration

Uniform Patterned Synthesis of Vertically-Aligned Carbon Nanotubes on Low-Stress Micromechanical Structures

Carbon dioxide-boosted growth of high-density and vertically aligned carbon nanotube arrays on a stainless steel mesh

Transfer of vertically aligned carbon nanotube arrays onto flexible substrates for gecko-inspired dry adhesive application

Encapsulated carbon nanotube array as a thermal interface material compatible with standard electronics packaging

Synthesis of high quality, closely packed vertically aligned carbon nanotube array and a quantitative study of the influence of packing density on the collective thermal conductivity

Chemical Vapor Deposition of Vertically Aligned Carbon Nanotube Arrays: Critical Effects of Oxide Buffer Layers

Water Vapor Treatment for Decreasing the Adhesion Between Vertically Aligned Carbon Nanotubes and the Growth Substrate

Improved thermal conductivities of vertically aligned carbon nanotube arrays using three-dimensional carbon nanotube networks